Week 1 Tuesday
Challenge: Project Runway
Instructions: Today you will design, build (i.e. fold) and launch a paper airplane. Your goal is to make a plane that flies further than anyones. Working in teams of 3, choose one person to be the designer, one to be the builder, and one to be the launcher. You can talk to each other at all stages but be sure each person does the assigned job and that someone takes notes of your work together (decisions, uncertainties, disagreements, expertise etc). Your team may use the internet if you want.
The designer has one dollar to spend and your team must keep track of costs. No refunds will be issued for parts you do not use. In the event of a tie, cost and aesthetics will serve as the tie breaker. Relevant materials cost:
- paper is 30 cents a sheet
- paper clips are 10 cents each
- scotch tape is 5 cents per 1 inch strip
- pennies cost 20 cents each
- a pencil costs 10 cents
- scissors are unavailable
- a test flight before the competition costs 30 cents.
Your team has 20 minutes to design and build a plane for the competition. If you are not ready to launch at this time, you will forfeit.
For tomorrow's studio session
Draft a letter. Address this letter to someone(s) you care about. Your letter should introduce and describe a real world problem or opportunity, one that you have inherited, identified, dreamt about, or otherwise encountered, and that you would like to solve or realize. Your letter should explain why you feel the problem or opportunity is important, and what the consequences of success might be. You can focus on more than one issue, but each issue needs to be explained. Please print and bring your letter to the studio tomorrow. Time to complete this letter: 1 hour MAX.
Week 1 Studio
Part 1: Wednesday matinee
Instructions: Today you will have the opportunity to watch two of four videos showcasing completed iGEM projects. "iGEM" stands for the "international Genetically Engineered Machines" competition. It is a summer-long opportunity for teams of students working at colleges and universities around the world to design and build genetically engineered machines, many of which use standard biological parts from the Registry of Standard Biological Parts. The videos will orient you to the kinds of accomplishments realized in a summer by teams of undergraduates and their advisers.
Our featured presentations will be
which everyone will watch. We will then talk as a group to describe what was done.
Next you may choose to view either
After the presentation, you will have 10 minutes to gather with your fellow moviegoers and discuss what you saw, using these "iGEM review questions" as a guide for your conversations:
- what was the problem this team chose to address and why?
- is this an important problem and why or why not?
- did they succeed in part or in total?
- if you could ask this team one question what would it be?
Take notes since you will need to record your answers to these same questions as part of your homework assignment
Part 2: Dear John
As homework you were asked to draft a letter describing a real world problem or opportunity you have inherited that could be addressed in the near term. You should discuss these letters at your team tables and make some notes about them on the white boards. For example,
- who were they addressed to?
- how many problems/opportunities did each letter address?
- what areas were tackled?
- how many also proposed solutions to these problems?
For next week's studio session
You should revise your letter based on any feedback you received from your classmates today.
Week 1 Thursday
Challenge: Sexy on the inside 2
- Watch this video in which Gever Tulley talks about learning by doing.
- Watch this video of a person taking apart a MacBook Air
- Working in groups of 4, you will take apart a tape recorder. One person should work the tools, another should record the process (e.g. "began by taking off back panel), another should keep a parts list (e.g. "4 Phillips-screws 3 mm long from back panel"), and the last person should record the purpose of each component (e.g. "Phillips screws held back panel in place). Your team's goal is to disassemble the tape recorder into the greatest number of re-usable parts... note of the word "reusable" since next time we meet, the goal will be to reassemble your tape recorder into a working machine. As you work, you may find it helpful to describe what you think each component does and if it's made of sub-components that can be separated further without forever destroying the component's function.
- "One of the problems of taking things apart and seeing how they work--supposing you're trying to find out how a cat works--you take that cat apart to see how it works, what you've got in your hands is a non-working cat," Douglas Adams
For next week's studio session
- Read Adventures in SB. Using the problem or opportunity you described in your letter, draft a two chapter script for a comic book using characters from your imagination. In chapter 1, have the characters talk about the problem or opportunity. In chapter 2, have the characters brainstorm a way to solve the issue. Print these out to bring to the 20.020 studio time next Wednesday. Time to complete this script: 1 hour MAX.
- For an example script, and making a comic background, check this out.
- Complete survey. Click here to start It should only take ~10 minutes. Please note that this is NOT the same survey that the Project-Based Learning Center might have asked you to complete.