Antigen retrieval

From OpenWetWare

Revision as of 10:27, 19 October 2009 by Jakob Suckale (Talk | contribs)
Jump to: navigation, search
back to protocols

Detection techniques using antibodies often fail to work on PFA- or formalin-fixed, paraffin-embedded sections. Antigen retrieval methods can then, in some cases, enable specific antibody detection. They work by reversing some of the chemical modification of epitopes during fixation. These procedures will not help much with epitope loss due to denaturation during sample treatment, like hot paraffin embedding.

Contents

Types of retrieval methods

  1. Heat treatment
  2. Protease treatment
  3. Detergent treatment

Protocol

  1. Choose desired slides (paraformaldyhyde-fixed, 10 micron thick crysections).
  2. Leave the chosen slides at room temperature just until the frost melts.
  3. Hydrate slides in 1x PBS for 10 seconds.
  4. Put slides into 0.01 M Citric acid (pH 6.0), microwave just to a boil, and let cool for 5 minutes.
  5. Repeat Step 4 two more times (three times total).
  6. Rinse the slides 6 times in 1x TBST for 8 minutes each.
  7. Block with 5% milk powder in 1x TBST for 30 minutes at room temperature. Optional: 1-2% BSA can be added to TBST.
  8. Incubate overnight at 4oC with primary antibodies in TBST plus 5% milk.
  9. Rinse for 10 seconds, 1x TBST. Then, rinse 3 times in 1x TBST for 8 minutes each.
  10. Add secondary antibodies in TBST for 1 hour at room temperature in the dark.
  11. Rinse 3 times in 1x TBS for 8 minutes each.
  12. Add Fluorescent Mounting Medium, coverslip, and examine under a fluorescent microscope.
  13. Lastly, seal the edges of covered-slip slides with a clear nail polish. This helps slides retain fluorescence longer during storage.

TBST = TBS + 0.1% Triton

Lab-specific protocols

  • Korey Griffin's notes:

See also

Personal tools