BE.109:Lab tour

From OpenWetWare

(Difference between revisions)
Jump to: navigation, search
Current revision (16:50, 7 May 2008) (view source)
(For next time)
 
(26 intermediate revisions not shown.)
Line 1: Line 1:
 +
{{Template:BE.109}}
 +
There are six stations for you and your lab partner to visit on your lab tour today. Some will be guided tours with a TA or faculty there to help you and others are self-guided, leaving you and your partner to try things on your own. Your visit to each station will last 10-15 minutes. It doesn’t matter which station you visit first but you must visit them all before you leave today. Your lab practical next time will assess your mastery of each station.
There are six stations for you and your lab partner to visit on your lab tour today. Some will be guided tours with a TA or faculty there to help you and others are self-guided, leaving you and your partner to try things on your own. Your visit to each station will last 10-15 minutes. It doesn’t matter which station you visit first but you must visit them all before you leave today. Your lab practical next time will assess your mastery of each station.
Line 6: Line 8:
Someone will show you how to use your pipetmen and then you will use them to dilute a blue dye (0.01% Xylene Cyanol).  
Someone will show you how to use your pipetmen and then you will use them to dilute a blue dye (0.01% Xylene Cyanol).  
-
#If you have never used pipetmen then you should practice by pipeting 800, 80 and 8 ul of the 0.01% XC stock into eppendorf tubes. XC is not hazardous but it will stain your clothes. Pipet each volume three times and visually inspect how well the volumes match.   
+
#If you have never used pipetmen then you should practice by pipeting 800, 80 and 8 μl of the 0.01% XC stock into eppendorf tubes. XC is not hazardous but it will stain your clothes. Pipet each volume three times and visually inspect how well the volumes match.   
-
#Using your P20, measure 10, 15 and 20 ul of the 0.01% XC stock solution into the bottom of three cuvettes. Using your P1000, add water to bring the final volume to 1 ml (=1000 ul).  
+
#Using your P20, measure 10, 15 and 20 μl of the 0.01% XC stock solution into the bottom of three cuvettes. Using your P1000, add water to bring the final volume to 1 ml (=1000 μl).  
-
#Using your P200, measure 20, 50 and 100 ul of the 0.01% XC stock solution into the bottom of three more cuvettes. Using your P1000, add water to bring the final volume to 1 ml.  
+
#Using your P200, measure 20, 50 and 100 μl of the 0.01% XC stock solution into the bottom of three more cuvettes. Using your P1000, add water to bring the final volume to 1 ml.  
-
#Using your P1000, measure 100, 200, and 400 ul of 0.01% XC solution into the bottom of three more cuvettes. Add water to bring the final volume to 1 ml.  
+
#Using your P1000, measure 100, 200, and 400 μl of 0.01% XC solution into the bottom of three more cuvettes. Add water to bring the final volume to 1 ml.  
#With a gloved hand or with a piece of parafilm over the lip of the cuvette, invert each cuvette several times to thoroughly mix the contents.  
#With a gloved hand or with a piece of parafilm over the lip of the cuvette, invert each cuvette several times to thoroughly mix the contents.  
#Visually compare your dilutions to the reference ones. If time permits, you will read the absorbance of your dilutions in the spectrophotometer so do not throw them away.
#Visually compare your dilutions to the reference ones. If time permits, you will read the absorbance of your dilutions in the spectrophotometer so do not throw them away.
Line 23: Line 25:
[[Image:Be109conventionalmicroscope.jpg|thumb|left|400px|'''Conventional Microscope''']]
[[Image:Be109conventionalmicroscope.jpg|thumb|left|400px|'''Conventional Microscope''']]
[[Image:Be109fluorescencemicroscope.jpg|thumb|right|400px|'''Fluorescent Microscope''']]
[[Image:Be109fluorescencemicroscope.jpg|thumb|right|400px|'''Fluorescent Microscope''']]
 +
<br style="clear:both" />
Today you will be shown how to use each of the microscopes in the main lab and you will use them to compare three cell types. You will be asked to focus a sample during the lab practical next week.
Today you will be shown how to use each of the microscopes in the main lab and you will use them to compare three cell types. You will be asked to focus a sample during the lab practical next week.
Line 30: Line 33:
'''(Guided)'''
'''(Guided)'''
-
Our lab is beautifully equipped. We have a fume hood for work that generates hazardous vapors. We have a back room where dishes can be washed and material can be decontaminated. The backroom also has an icemaker, a sink with ultrapure water and several CO2 tanks that feed into the incubators in the tissue culture facility.
+
Our lab is beautifully equipped. We have a fume hood for work that generates hazardous vapors. We have a back room where dishes can be washed and material can be decontaminated. The backroom also has an icemaker, a sink with ultrapure water and several CO<sub>2</sub> tanks that feed into the incubators in the tissue culture facility.
The tissue culture facility has three hoods with germicidal lamps, six incubators for growing eukaryotic cells, two inverted microscopes, and a tabletop centrifuge. It also has a waterbath for warming up solutions and a refrigerator for keeping them cool.   
The tissue culture facility has three hoods with germicidal lamps, six incubators for growing eukaryotic cells, two inverted microscopes, and a tabletop centrifuge. It also has a waterbath for warming up solutions and a refrigerator for keeping them cool.   
-
Today you will be shown how to use the autoclave and what it does. You will also be shown some key features of the tissue culture facility, including the different types of waste disposal containers (for trash, biohazard, sharps). More formal training in tissue culture techniques will occur as part of experimental modules 3 and 4.
+
Today you will be shown how to use the autoclave and what it does. You will also be shown some key features of the tissue culture facility, including the different types of waste disposal containers (for trash, biohazard, sharps). More formal training in tissue culture techniques will occur as part of experimental module 1.
==Introduction to making solutions==
==Introduction to making solutions==
Line 44: Line 47:
[[Image:Be109balance.jpg|thumb|left|400px|'''Balance''']]
[[Image:Be109balance.jpg|thumb|left|400px|'''Balance''']]
[[Image:Be109pHmeter.jpg|thumb|right|400px|'''pH meter''']]
[[Image:Be109pHmeter.jpg|thumb|right|400px|'''pH meter''']]
 +
<br style="clear:both" />
===Part 1: At the Balance===
===Part 1: At the Balance===
Line 74: Line 78:
Color is created when a white light strikes a molecule that then reflects light of a certain wavelength and absorbs all the others. A spectrophotometer is an instrument that measures the amount of light absorbed by a sample. It does this by shining light of a particular wavelength into a sample and measuring how much light comes all the way through. Samples are held in cuvettes between the light source and the detector.
Color is created when a white light strikes a molecule that then reflects light of a certain wavelength and absorbs all the others. A spectrophotometer is an instrument that measures the amount of light absorbed by a sample. It does this by shining light of a particular wavelength into a sample and measuring how much light comes all the way through. Samples are held in cuvettes between the light source and the detector.
-
                    Lightin Lightout
+
[[Image:Be109absorbance.jpg|thumb|left|500px|'''Measuring absorbance''']]
-
cuvette Lightin - Lightout =Lightabsorbed
+
<br style="clear:both" />
Here are two important things to remember about spectrophotometers. First, different compounds absorb different wavelengths of light. Red pigments absorb blue light (light of ~300 nm wavelengths) and blue pigments absorb red light (light of ~600 nm wavelengths). Therefore all spectrophotometers have ways of adjusting the wavelength of light shining into the sample. The second important point is that the amount of light absorbed by a sample is directly proportional the concentration of that sample. This is a very useful relationship, making the spectrophotometer a valuable research tool.  
Here are two important things to remember about spectrophotometers. First, different compounds absorb different wavelengths of light. Red pigments absorb blue light (light of ~300 nm wavelengths) and blue pigments absorb red light (light of ~600 nm wavelengths). Therefore all spectrophotometers have ways of adjusting the wavelength of light shining into the sample. The second important point is that the amount of light absorbed by a sample is directly proportional the concentration of that sample. This is a very useful relationship, making the spectrophotometer a valuable research tool.  
Line 81: Line 85:
[[Image:Be109spectrophotometer.jpg|thumb|left|400px|'''Spectrophotometer''']]
[[Image:Be109spectrophotometer.jpg|thumb|left|400px|'''Spectrophotometer''']]
[[Image:Be109cuvetteholder.jpg|thumb|right|400px|'''Cuvette Holder''']]
[[Image:Be109cuvetteholder.jpg|thumb|right|400px|'''Cuvette Holder''']]
 +
<br style="clear:both" />
===Part 1: Using the Spectrophotometer===
===Part 1: Using the Spectrophotometer===
Line 98: Line 103:
#There should also be good agreement between the 20 ul measurements made with the P20 and the P200 as well as the 100 ul measurements made with the P200 and P1000. Is there?
#There should also be good agreement between the 20 ul measurements made with the P20 and the P200 as well as the 100 ul measurements made with the P200 and P1000. Is there?
-
[[Image:Be109P20calibration.png|frame|left|'''P20 calibration''']]
+
[[Image:Be109p20calibration.jpg|thumb|left|250px|'''P20 calibration''']]
-
[[Image:Be109P200calibration.png|frame|left|'''P200 calibration''']]
+
[[Image:Be109p200calibration.jpg|thumb|left|250px|'''P200 calibration''']]
-
[[Image:Be109P1000calibration.png|frame|left|'''P1000 calibration''']]
+
[[Image:Be109p1000calibration.jpg|thumb|left|250px|'''P1000 calibration''']]
 +
<br style="clear:both" />
==Introduction to lab math==
==Introduction to lab math==
Line 111: Line 117:
This is the numerical language of science. Base units that you will most often use in this class are meters, grams, liters, and moles. These units will be appended with prefixes to modify the unit by a power of ten.
This is the numerical language of science. Base units that you will most often use in this class are meters, grams, liters, and moles. These units will be appended with prefixes to modify the unit by a power of ten.
-
     10<sup>3</sup>    = 1000         = 1000/1 = 103/1  kilo (k-)
+
     10<sup>3</sup>    = 1000         = 1000/1 = 10<sup>3</sup>/1  kilo (k-)
-
     100         = 1 = 1/1 = 100/1  unit (-g, -l, -mole…)
+
     10<sup>0</sup>          = 1 = 1/1 = 10<sup>0</sup>/1  base unit (-g, -l, -mole…)
-
     10<sup>-3</sup> = 0.001 = 1/1000 = 1/103 milli (m-)
+
     10<sup>-3</sup> = 0.001 = 1/1000 = 1/10<sup>3</sup> milli (m-)
-
     10<sup>-6</sup> = 0.000001 = 1/1000000 = 1/106 micro (u-)
+
     10<sup>-6</sup> = 0.000001 = 1/1000000 = 1/10<sup>6</sup> micro (μ-)
   
   
'''Practice problems:'''
'''Practice problems:'''
-
#The distance between two cells in 800 um. How many mm is that?
+
#The distance between two cells in 800 μm. How many mm is that?
#The amount of sorbitol you want to weigh is 1.9 g. How many mg is that?
#The amount of sorbitol you want to weigh is 1.9 g. How many mg is that?
#The volume you want to measure is 100 ml. How many liters is that?
#The volume you want to measure is 100 ml. How many liters is that?
-
#Your reaction generates 0.1 umoles of product. How many mmoles is that?
+
#Your reaction generates 0.1 μmoles of product. How many mmoles is that?
Scientific notation expresses numbers so there is one digit to the left of the decimal point and that number is multiplied by a power of ten. 2334 becomes 2.334 x 10<sup>3</sup> and 0.0041 becomes 4.1 x 10<sup>-3</sup>. Computations are easier with numbers in scientific notation and some numbers that are easier to write (602,214,199,000,000,000,000,000 versus 6.02 x 10<sup>23</sup>).  
Scientific notation expresses numbers so there is one digit to the left of the decimal point and that number is multiplied by a power of ten. 2334 becomes 2.334 x 10<sup>3</sup> and 0.0041 becomes 4.1 x 10<sup>-3</sup>. Computations are easier with numbers in scientific notation and some numbers that are easier to write (602,214,199,000,000,000,000,000 versus 6.02 x 10<sup>23</sup>).  
Line 131: Line 137:
#0.000000467
#0.000000467
-
The metric system and scientific notation go hand in hand, making unit conversions straightforward. For example 100 ul can be converted to ml by writing the starting volume in scientific notation (1.00 x 102 ul) and multiplying by the power of ten that separates the units (1 ml = 1 x 103 ul). Set up every equation so the units will cancel properly when you multiply through.  
+
The metric system and scientific notation go hand in hand, making unit conversions straightforward. For example 100 μl can be converted to ml by writing the starting volume in scientific notation (1.00 x 10<sup>2</sup> μl) and multiplying by the power of ten that separates the units (1 ml = 1 x 10<sup>3</sup> μl). Set up every equation so the units will cancel properly when you multiply through.  
'''Practice problems:''' Be sure you can express your answers in scientific notation.
'''Practice problems:''' Be sure you can express your answers in scientific notation.
-
#How many ml is 100 ul?  
+
#How many ml is 100 μl?  
#How many mg is .023 g?  
#How many mg is .023 g?  
-
#How many mmoles is 250 umoles?
+
#How many mmoles is 250 μmoles?
===Part 2: Concentrations===
===Part 2: Concentrations===
Line 151: Line 157:
Many solutions are made by diluting concentrated stock solutions. Dilution factors of 1:2, 1:5, 1:10 and 1:100 are common. These dilutions are made by diluting one “part” stock with 1, 4, 9 or 99 “parts” water. For example, you could make 100 ml of a 0.5M sorbitol solution by mixing 10 ml of a 5M stock solution with 90 ml of water. This is a 1:10 dilution of the stock. The dilution factor can be converted to a fraction to determine the solution’s final concentration (5M x 1/10 = 0.5M).  
Many solutions are made by diluting concentrated stock solutions. Dilution factors of 1:2, 1:5, 1:10 and 1:100 are common. These dilutions are made by diluting one “part” stock with 1, 4, 9 or 99 “parts” water. For example, you could make 100 ml of a 0.5M sorbitol solution by mixing 10 ml of a 5M stock solution with 90 ml of water. This is a 1:10 dilution of the stock. The dilution factor can be converted to a fraction to determine the solution’s final concentration (5M x 1/10 = 0.5M).  
-
When the dilution factor is less obvious, the formula C1V1 = C2V2 can be used,  
+
When the dilution factor is less obvious, the formula C<sub>1</sub>V<sub>1</sub> = C<sub>2</sub>V<sub>2</sub> can be used,  
-
where C1 is the starting concentration of the stock solution,
+
where C<sub>1</sub> is the starting concentration of the stock solution,
-
C2 is the desired concentration,  
+
C<sub>2</sub> is the desired concentration,  
-
V1 is the volume of stock you’ll need (usually this is your unknown) and
+
V<sub>1</sub> is the volume of stock you’ll need (usually this is your unknown) and
-
V2 is the final volume you want to make. For example, to make 1000 ml of a 0.2M Tris from a 1.5M stock you would multiply 1.5M (V1) = 0.2M (1000) to find that you will need 133 ml of the stock. To determine how much water to add you would subtract V2 V1, in this case 1000 ml –133 ml = 867 ml of water.   
+
V<sub>2</sub> is the final volume you want to make. For example, to make 1000 ml of a 0.2M Tris from a 1.5M stock you would multiply 1.5M (V<sub>1</sub>) = 0.2M (1000) to find that you will need 133 ml of the stock. To determine how much water to add you would subtract V<sub>2</sub> V<sub>1</sub>, in this case 1000 ml –133 ml = 867 ml of water.   
When solutions must be diluted several orders of magnitude, then serial dilutions are made. The concentrated stock is progressively diluted, for example using a 1:100 dilution as the new “stock” in another 1:100 dilution. Such a serial dilution produces a solution that is 10,000 times less concentrated than the starting material. One benefit to serial dilutions is that small volumes of each dilution can be made accurately. A drawback is that any pipetting or calculation error is propagated through every dilution.  
When solutions must be diluted several orders of magnitude, then serial dilutions are made. The concentrated stock is progressively diluted, for example using a 1:100 dilution as the new “stock” in another 1:100 dilution. Such a serial dilution produces a solution that is 10,000 times less concentrated than the starting material. One benefit to serial dilutions is that small volumes of each dilution can be made accurately. A drawback is that any pipetting or calculation error is propagated through every dilution.  
Line 164: Line 170:
#A concentrated culture of bacteria has approximately 1 x 10<sup>8</sup> cells/ml. What is the concentration of bacteria after it has been diluted 1:100? What is the concentration of bacteria if a 1:2 dilution was made of the 1:100?
#A concentrated culture of bacteria has approximately 1 x 10<sup>8</sup> cells/ml. What is the concentration of bacteria after it has been diluted 1:100? What is the concentration of bacteria if a 1:2 dilution was made of the 1:100?
-
==Before next time==
 
-
Review today’s lab to prepare for the lab practical that you and your partner will take together.
 
-
Complete the Chemical Safety Training on Athena.  
+
DONE!
-
Go to: http://mitehs.traincaster.com/
+
 
-
Select “Register Web” (you will need a web certificate for your computer)
+
==For next time==
-
Select Biological Engineering for your department  
+
 
-
Select Dr. Kuldell as your PI (Principle Investigator)  
+
1. Review today’s lab to prepare for the lab practical that you and your partner will take together.
-
Select “Works with hazardous chemicals in a lab”  
+
 
-
Finally, complete the “Chemical Hygiene Training” web course and web-quiz
+
2. Complete the Chemical Safety Training on Athena.  
 +
*Go to: http://mit.edu/environment/training/
 +
*Select “Register Web” (you will need a web certificate for your computer)
 +
*Select Biological Engineering for your department  
 +
*Select Dr. Kuldell as your PI (Principle Investigator)  
 +
*Select “Works with hazardous chemicals in a lab”  
 +
*Finally, complete the “Chemical Hygiene Training” web course and web-quiz
Print the certificate of completion to turn in next time
Print the certificate of completion to turn in next time
-
Get a lab notebook. It should be bound and have duplicate, numbered pages. You can choose the style with carbon sheets or the carbon-less kind used in 5.310.
+
3. Get a lab notebook. It should be bound and have duplicate, numbered pages. You can choose the style with carbon sheets or the carbon-less kind used in 5.310.
 +
 
 +
4. Complete the student registration/questionnaire to turn in next time [[Image:BE109StudentReg S06.doc|Student Registration/Questionnaire]].
 +
 
 +
5. [[OpenWetWare:How to join|Register for an account]] on [[Main Page | OpenWetWare]]. Once you get an account familiarize yourself with the wiki by reading [[BE.109:OpenWetWare | Using OpenWetWare]]. Put some information on your user page.
 +
 
 +
6. Read the introduction for the [[BE.109:DNA engineering | DNA engineering module]]: an experiment that you'll start next time.
-
Complete the student registration/questionnaire to turn in next time
+
7. Learn a little about the Polymerase Chain Reaction (PCR) since you will perform these reactions next time. It is described in most biology textbooks so you could start there. Alternatively, the internet has some nice animations of the process, for example
 +
*http://www.dnai.org/b/index.html (follow the links through “techniques” and "amplifying DNA”)
 +
*or try: http://www.dnalc.org/shockwave/pcranwhole.html

Current revision

BE.109 Laboratory Fundamentals of Biological Engineering

Image:BE LongImage-1.jpg

Home        Getting started        Lab        Presenting your work        People        Schedule       

DNA engineering        Protein engineering        Systems engineering        Bio-material engineering       

There are six stations for you and your lab partner to visit on your lab tour today. Some will be guided tours with a TA or faculty there to help you and others are self-guided, leaving you and your partner to try things on your own. Your visit to each station will last 10-15 minutes. It doesn’t matter which station you visit first but you must visit them all before you leave today. Your lab practical next time will assess your mastery of each station.

Contents

Introduction to pipetting

(Guided)

Someone will show you how to use your pipetmen and then you will use them to dilute a blue dye (0.01% Xylene Cyanol).

  1. If you have never used pipetmen then you should practice by pipeting 800, 80 and 8 μl of the 0.01% XC stock into eppendorf tubes. XC is not hazardous but it will stain your clothes. Pipet each volume three times and visually inspect how well the volumes match.
  2. Using your P20, measure 10, 15 and 20 μl of the 0.01% XC stock solution into the bottom of three cuvettes. Using your P1000, add water to bring the final volume to 1 ml (=1000 μl).
  3. Using your P200, measure 20, 50 and 100 μl of the 0.01% XC stock solution into the bottom of three more cuvettes. Using your P1000, add water to bring the final volume to 1 ml.
  4. Using your P1000, measure 100, 200, and 400 μl of 0.01% XC solution into the bottom of three more cuvettes. Add water to bring the final volume to 1 ml.
  5. With a gloved hand or with a piece of parafilm over the lip of the cuvette, invert each cuvette several times to thoroughly mix the contents.
  6. Visually compare your dilutions to the reference ones. If time permits, you will read the absorbance of your dilutions in the spectrophotometer so do not throw them away.

Introduction to our microscopes

(Guided)

Much of biology examines natural components that are too small to see. Imaging technology took a gigantic step forward in the 1680s when Anton van Leeuwenhoek ground a microscope lens sufficiently fine to see a living cell (a bacteria he had scraped from his teeth!). His microscope had one lens and the image he saw was approximately 250 times its natural size (250X magnification). Compound microscopes, like the ones we have in lab, use a second lens to magnify the image from the first and can increase the total magnification up to 1000X. One of our microscopes is also attached to a beam splitter that allows excitation light to be separated from emitted light. This allows us to perform fluorescence microscopy.

No matter how fine its lens, a light microscope cannot distinguish objects closer than 200 nm. The resolution of light microscopes is limited by both the wavelength of white light (300-700 nm) and the scattering of light by the object it strikes. For better resolution, great lenses must be combined with shorter wavelengths, such as those followed by electrons or lasers, and better ways of focusing the beam such as forcing it to travel through a vacuum or an oil. Linking the microscope to a computer with digital image processing can also enhance its images. The sample itself can also be stained or fluorescently tagged to improve detection of its features.

Conventional Microscope
Conventional Microscope
Fluorescent Microscope
Fluorescent Microscope


Today you will be shown how to use each of the microscopes in the main lab and you will use them to compare three cell types. You will be asked to focus a sample during the lab practical next week.

Introduction to our "back room" and tissue culture facility

(Guided)

Our lab is beautifully equipped. We have a fume hood for work that generates hazardous vapors. We have a back room where dishes can be washed and material can be decontaminated. The backroom also has an icemaker, a sink with ultrapure water and several CO2 tanks that feed into the incubators in the tissue culture facility.

The tissue culture facility has three hoods with germicidal lamps, six incubators for growing eukaryotic cells, two inverted microscopes, and a tabletop centrifuge. It also has a waterbath for warming up solutions and a refrigerator for keeping them cool.

Today you will be shown how to use the autoclave and what it does. You will also be shown some key features of the tissue culture facility, including the different types of waste disposal containers (for trash, biohazard, sharps). More formal training in tissue culture techniques will occur as part of experimental module 1.

Introduction to making solutions

(Self-Guided)

Today you will make 100 ml of a 0.5M sorbitol solution and measure its pH. Making solutions is a fundamental part of being in lab and the success of your experiments is absolutely dependent on doing it correctly and consistently. If you are unclear about any of the following instructions, be sure to ask for help.

Balance
Balance
pH meter
pH meter


Part 1: At the Balance

  1. Put on gloves to weigh out solids. This protects you from the chemicals and the chemicals from getting contaminated with anything foreign on your hands. Sorbitol is not a dangerous chemical.
  2. Zero the balance with a medium size weigh boat on it. Weigh boats are kept in the drawer under the balance. The marked -> O/T <- will zero (“tare”) the balance and the display should read 0.0000 after taring. Be sure to close the balance doors when taring the balance.
  3. Use a spatula to measure 9.1 grams of sorbitol. To measure this, open the balance doors and hold the spatula and chemical over the weigh boat. Begin by adding only a small amount of the powder to the weigh boat. Once you determine how much that weighs, you can add correspondingly more. If you have weighed out too much, you can put some back as long as you have used a clean spatula and a clean weigh boat.
  4. Remove the weigh boat with your sorbitol from the balance, gently bend the ends together and pour the contents into a beaker. Tap the back of the weigh boat to loosen any powder that is stuck. The weigh boat can be discarded in the trash since sorbitol is not dangerous.
  5. Clean the balance with a brush. Clean the area around the balance with a wet paper towel.

Part 2: Measuring Liquids and Mixing

  1. Measure approximately 80 ml of ultrapure water into a 100 ml graduated cylinder. Read the volume in the cylinder by bringing it to eye level to see where the meniscus reaches. Add the water to the beaker with your sorbitol.
  2. Gently drop in a magnetic stir bar with a diameter approximately 1/2 that of the beaker. Magnetic stir bars are kept in the drawer below the balance.
  3. Put the beaker on the stir plate and turn the stirrer on slowly. The stir bar should spin fast enough to form a vortex in the center of the beaker. You do not want the stir bar to bump around in the beaker since this can break the beaker. If the stir bar is stirring unevenly, then turn off the stir plate, allow the magnetic stir bar to stop, and then start it again.
  4. Stir until all the powder is dissolved.
  5. Pour the solution back into your graduated cylinder.
  6. Add ultrapure water up to 100 ml using a plastic disposable pipet. To open the pipet, hold it in one hand. With the other hand puncture the wrapper by pulling it against the top of the pipet (not the end with the tip!). Put the exposed end of the pipet into the pipet aid or bulb then withdraw the pipet from the rest of the wrapper. Place the tip of the pipet into the ultrapure water and withdraw enough water to “top off” your solution. Dispense the water into your sorbitol by submerging the tip of the pipet into the solution and releasing the water from the pipet. Stop when the graduated cylinder reads 100 ml. Extra water can be discarded into the sink and the used pipet can be discarded in the sharps waste container that is under the bench.

Part 3: Measuring pH

  1. Since you will measure the pH of your solution you should pour it back into your beaker and put it on a stir plate. Start the stir bar gently spinning. If you did not have to measure its pH you would move it to a bottle for storage.
  2. Remove the pH electrode from the storage solution and rinse it over the waste beaker using distilled water from the wash bottle. A Kimwipe can be used to gently dry the electrode.
  3. Place the electrode 1/2 way into the 15 ml conical tube with calibration buffer pH 7.0. Press the “read” button. Wait for the reading to stabilize and note how close it is to pH 7. Press the “read” button again to put the pH meter on standby.
  4. Rinse and dry the electrode then place it in your sorbitol solution. Hold the electrode at the edge of the beaker and be careful not to let the stir bar hit (and break!) the electrode. Read the pH of your solution and let one of the teaching faculty know what you have found.
  5. Rinse and dry the electrode then return it to the electrode storage solution.
  6. Pour the sorbitol solution (but not the stir bar!) down the sink. Rinse the beaker with tap water and return it to the balance area. Dry the stir bar and return it to the drawer.

Introduction to our spectrophotometer

(Self-Guided)

Color is created when a white light strikes a molecule that then reflects light of a certain wavelength and absorbs all the others. A spectrophotometer is an instrument that measures the amount of light absorbed by a sample. It does this by shining light of a particular wavelength into a sample and measuring how much light comes all the way through. Samples are held in cuvettes between the light source and the detector.

Measuring absorbance
Measuring absorbance


Here are two important things to remember about spectrophotometers. First, different compounds absorb different wavelengths of light. Red pigments absorb blue light (light of ~300 nm wavelengths) and blue pigments absorb red light (light of ~600 nm wavelengths). Therefore all spectrophotometers have ways of adjusting the wavelength of light shining into the sample. The second important point is that the amount of light absorbed by a sample is directly proportional the concentration of that sample. This is a very useful relationship, making the spectrophotometer a valuable research tool.

Spectrophotometer
Spectrophotometer
Cuvette Holder
Cuvette Holder


Part 1: Using the Spectrophotometer

In this assay you will calibrate your pipets by measuring the absorbance of the XC dilutions you made. Beer’s Law, which relates absorbance to concentration, will be derived as part of experimental module 2. Here, you’ll see that the graph of absorbance versus volume of 0.01% XC is a straight line….or at least it should be!

  1. Using your P1000, measure 1 ml of water into a plastic cuvette. This cuvette will serve as your blank for the spectrophotometer.
  2. Confirm that the machine is set to read absorbances at 600 nm.
  3. Put your blank into the spectrophotometer at position 1, which is furthest back in the instrument. Be sure the window of the cuvette and not the frosty sides are in the light beam that travels from left to right.
  4. Close the door of the spectrophotometer. Click “blank” (lower left of the screen). A “reading blank” message should appear. When the message is gone, then the blank is set.
  5. Replace the blank with your first sample. Close the door of the spectrophotometer. Click “read samples” (upper left of the screen). Write down this value.
  6. Repeat with all your samples.
  7. Remove your last sample. Close the door of the spectrophotometer.
  8. The XC dilutions can be washed down the sink and the cuvettes can be discarded in the sharps bin.

Part 2: Considering your data

  1. Use Excel to prepare a graph of absorbance versus volume of 0.01% XC. Some sample graphs are reproduced below and you should generate similar ones with your data. Be sure to include a trendline, displaying its equation as well as the r-squared value on the graph. The r-squared value reflects how well the data points fit the equation. A perfect fit will give an r-squared value of 1. If you are uncertain how to make such a graph using Excel, be sure to ask for help. We will use Excel a lot this semester, in particular during experimental module 2.
  2. If the pipets were well calibrated and the measurements were done carefully, then the points should fall close to a straight line, and the r-squared will be close to 1. If one point seems way off, you can repeat the three measurements for that pipetman. If the second set of data does not look linear, we can clean the inner workings of your pipetman before you try the assay again.
  3. There should also be good agreement between the 20 ul measurements made with the P20 and the P200 as well as the 100 ul measurements made with the P200 and P1000. Is there?
P20 calibration
P20 calibration
P200 calibration
P200 calibration
P1000 calibration
P1000 calibration


Introduction to lab math

(Self-Guided)

The information and exercises provided here are intended to refresh your memory of these concepts. If they are entirely new to you or if you are struggling with the practice problems, please ask for extra help. It is absolutely essential that you are comfortable with the information presented here.

Part 1: Metric system

This is the numerical language of science. Base units that you will most often use in this class are meters, grams, liters, and moles. These units will be appended with prefixes to modify the unit by a power of ten.

   103    	= 1000 	        = 1000/1 	= 103/1  	kilo (k-)
   100          = 1	 	= 1/1 		= 100/1  	base unit (-g, -l, -mole…)	
   10-3 	= 0.001 	= 1/1000 	= 1/103  	milli (m-)
   10-6 	= 0.000001 	= 1/1000000 	= 1/106  	micro (μ-)


Practice problems:

  1. The distance between two cells in 800 μm. How many mm is that?
  2. The amount of sorbitol you want to weigh is 1.9 g. How many mg is that?
  3. The volume you want to measure is 100 ml. How many liters is that?
  4. Your reaction generates 0.1 μmoles of product. How many mmoles is that?

Scientific notation expresses numbers so there is one digit to the left of the decimal point and that number is multiplied by a power of ten. 2334 becomes 2.334 x 103 and 0.0041 becomes 4.1 x 10-3. Computations are easier with numbers in scientific notation and some numbers that are easier to write (602,214,199,000,000,000,000,000 versus 6.02 x 1023).

Practice problems: Convert the following to scientific notation

  1. 1000
  2. 2
  3. 0.0023
  4. 0.000000467

The metric system and scientific notation go hand in hand, making unit conversions straightforward. For example 100 μl can be converted to ml by writing the starting volume in scientific notation (1.00 x 102 μl) and multiplying by the power of ten that separates the units (1 ml = 1 x 103 μl). Set up every equation so the units will cancel properly when you multiply through.

Practice problems: Be sure you can express your answers in scientific notation.

  1. How many ml is 100 μl?
  2. How many mg is .023 g?
  3. How many mmoles is 250 μmoles?

Part 2: Concentrations

Molarity (moles/liter) is a common expression of concentration. When making a solution of a particular molarity, you need to know three things: the desired molarity, the desired volume and the formula weight of the compound to be dissolved. The best place to find the formula weight (grams/mole) is on the chemical’s bottle. Calculations are performed by setting up an equation so that the units cancel, leaving grams in the numerator and volume in the denominator.

Another common expression of concentration is percent. Percent solutions are always based on 100 ml. For powdered substances, percent solutions reflect the weight in a 100 ml volume (“w/v”). For example a 10% solution of NaCl is 10 grams in 100 ml of water. In fact a 10% solution of any powdery substance is 10 grams in 100 ml. For liquids, percent solutions reflect the volume in a 100 ml final volume (“v/v”). For example a 70% ethanol solution is 70 ml of 100% ethanol and 30 ml of water. Remembering that 1 ml of water weighs 1 gram may help you remember the w/v and v/v expressions.

Practice problems:

  1. You want to make 100 ml of a 0.5M sorbitol solution. The formula weight of the substance you want to dissolve is 182. How many grams will you measure?
  2. You want to make 10 ml of a 0.01% (w/v) solution of XC. How many grams will you dissolve?
  3. How would you make 100 ml of a solution that is 5% (v/v) acetic acid and 5% methanol?

Part 3: Dilutions

Many solutions are made by diluting concentrated stock solutions. Dilution factors of 1:2, 1:5, 1:10 and 1:100 are common. These dilutions are made by diluting one “part” stock with 1, 4, 9 or 99 “parts” water. For example, you could make 100 ml of a 0.5M sorbitol solution by mixing 10 ml of a 5M stock solution with 90 ml of water. This is a 1:10 dilution of the stock. The dilution factor can be converted to a fraction to determine the solution’s final concentration (5M x 1/10 = 0.5M).

When the dilution factor is less obvious, the formula C1V1 = C2V2 can be used, where C1 is the starting concentration of the stock solution, C2 is the desired concentration, V1 is the volume of stock you’ll need (usually this is your unknown) and V2 is the final volume you want to make. For example, to make 1000 ml of a 0.2M Tris from a 1.5M stock you would multiply 1.5M (V1) = 0.2M (1000) to find that you will need 133 ml of the stock. To determine how much water to add you would subtract V2 – V1, in this case 1000 ml –133 ml = 867 ml of water.

When solutions must be diluted several orders of magnitude, then serial dilutions are made. The concentrated stock is progressively diluted, for example using a 1:100 dilution as the new “stock” in another 1:100 dilution. Such a serial dilution produces a solution that is 10,000 times less concentrated than the starting material. One benefit to serial dilutions is that small volumes of each dilution can be made accurately. A drawback is that any pipetting or calculation error is propagated through every dilution.

Practice Problems

  1. How would you make 50 ml of a 1:5 dilution?
  2. Give the volume of stock and the volume of water necessary to make 50 ml of a 0.25 M solution starting with a 2M solution.
  3. A concentrated culture of bacteria has approximately 1 x 108 cells/ml. What is the concentration of bacteria after it has been diluted 1:100? What is the concentration of bacteria if a 1:2 dilution was made of the 1:100?


DONE!

For next time

1. Review today’s lab to prepare for the lab practical that you and your partner will take together.

2. Complete the Chemical Safety Training on Athena.

  • Go to: http://mit.edu/environment/training/
  • Select “Register Web” (you will need a web certificate for your computer)
  • Select Biological Engineering for your department
  • Select Dr. Kuldell as your PI (Principle Investigator)
  • Select “Works with hazardous chemicals in a lab”
  • Finally, complete the “Chemical Hygiene Training” web course and web-quiz

Print the certificate of completion to turn in next time

3. Get a lab notebook. It should be bound and have duplicate, numbered pages. You can choose the style with carbon sheets or the carbon-less kind used in 5.310.

4. Complete the student registration/questionnaire to turn in next time Image:BE109StudentReg S06.doc.

5. Register for an account on OpenWetWare. Once you get an account familiarize yourself with the wiki by reading Using OpenWetWare. Put some information on your user page.

6. Read the introduction for the DNA engineering module: an experiment that you'll start next time.

7. Learn a little about the Polymerase Chain Reaction (PCR) since you will perform these reactions next time. It is described in most biology textbooks so you could start there. Alternatively, the internet has some nice animations of the process, for example

Personal tools