BME100 s2017:Projects2

BME 100 Spring 2017	Home People Lab Write-Up 1 | Lab Write-Up 2 | Lab Write-Up 3 Lab Write-Up 4 | Lab Write-Up 5 | Lab Write-Up 6 Course Logistics For Instructors Photos Wiki Editing Help
Lab 2: “Prototype Design” PART 1: LEARNING OBJECTIVES: Learn how to use SolidWorks: Leverage “Help” in SolidWorks and Custom video on Blackboard. Design a prototype to address the chosen health issue. Draw prototype in SolidWorks. Determine the technical feasibility. Determine the clinical feasibility. PART 1: ASSIGNMENT 1. Design and draw your prototype in SolidWorks. Upload as an image and provide a brief description (including how addresses health issue) on Open Wet Ware. 2. Determine the technical feasibility of your design. Include answers to the following questions: a. What are the technologies needed? b. What are the challenges? c. What could go wrong? 3. Determine the clinical feasibility. a. Will it work in the clinic? b. What are the clinical risks? c. Have similar products been in a clinical trial? How long was the trial? 4. Using the fundability worksheet chart, determine the scores (0-3) for technical feasibility and clinical feasibility and provide support for scores. Resources: - Video on the basics of SolidWorks (on Bb) - Video on how to search for clinical trial information: See “Improving Searches with Boolean Operators” Video to learn about ClinicalTrials.gov (on Bb) PART 2: LEARNING OBJECTIVES: Determine the market size. Determine fundability. PART 2: ASSIGNMENT: 1. What value does your prototype create for the customer? 2. Determine the cost to create your design. Justify. 3. What would be the anticipated average sale price (ASP)? Justify. 4. Using initial market size analysis in Lab 1, determine the market size in dollars per year. 5. Using the fundability worksheet, determine if your prototype should be funded. Justify why or why not. HW: Lab Report 2 (due 02/14/17 at 11:59PM through OpenWetWare) Grading Scheme: 50 points – See Rubric 50 points – Peer Assessment Rubric: Look for your Group's lab report link in the list of links on the right. If it is RED instead of blue, DO NOT CLICK ON IT! If the link is red, type the name of your Group's lab report link exactly as shown in the following text field and click the Create Page button. This should open up an Edit page that is pre-populated with a lab report template code. <createbox> preload=Template:ASUBME100_s2017_L2 prefix=BME100_s2017: width=25 buttonlabel=Create Page </createbox> Group1_W8AM_L2 Group2_W8AM_L2 Group3_W8AM_L2 Group4_W8AM_L2 Group5_W8AM_L2 Group6_W8AM_L2 Group7_W8AM_L2 Group8_W8AM_L2 Group9_W8AM_L2 Group10_W8AM_L2   Group1_W1030AM_L2 Group2_W1030AM_L2 Group3_W1030AM_L2 Group4_W1030AM_L2 Group5_W1030AM_L2 Group6_W1030AM_L2 Group7_W1030AM_L2 Group8_W1030AM_L2 Group9_W1030AM_L2 Group10_W1030AM_L2