* Ave. INTDEN = Average of ImageJ integrated density values from three Fluorimeter images
Bayesian Statistics
These following conditional statistics are based upon all of the DNA detection system results that were obtained in the PCR lab for 20 hypothetical patients who were diagnosed as either having cancer or not having cancer.
Calculation 1: The probability that the sample actually has the cancer DNA sequence, given a positive diagnostic signal.
A = frequency of cancer-positive conclusions = 9 / 20 = 0.45
B = frequency of positive PCR reactions = 26 / 60 = 0.43
P (B|A) = frequency of positive PCR given cancer-positive conclusion = 24 / 26 = 0.92
P(A|B) = 0.96 = 96%
Calculation 2: The probability that the sample actually has a non-cancer DNA sequence, given a negative diagnostic signal.
A = frequency of cancer-negative conclusions = 11 / 20 = 0.55
B = frequency of negative PCR reactions = 34 / 60 = 0.57
P (B|A) = frequency of negative PCR given cancer-negative conclusion = 31 / 34 = 0.91
P(A|B) = 0.88 = 88%
Calculation 3: The probability that the patient will develop cancer, given a cancer DNA sequence.
A = frequency of "yes" cancer diagnosis = 9 / 20 = 0.45
B = frequency of "pos" test conclusion = 26 / 60 = 0.43
P (B|A) = frequency of pos given yes = 24 / 26 = 0.92
P(A|B) = 0.96 = 96%
Calculation 4: The probability that the patient will not develop cancer, given a non-cancer DNA sequence.
A = frequency of "no" cancer diagnosis = 11 / 20 = 0.55
B = frequency of "neg" test conclusion = 34 / 60 = 0.57
P (B|A) = frequency of neg given no = 31 / 34 = 0.91
P(A|B) = 0.88 = 88%
New System: Design Strategy
We concluded that a good system Must Have:
- easily determined results: The easier the results are to read accurately, the less likely a misdiagnosis in either direction. It is undesirable both to give a false negative, where a patient is not treated when care is needed, or to give a false positive, wasting time and resources on those who do not need them. This aspect is central to any diagnostic tool.
- Simple OpenPCR Software: Simplicity increases ease and efficiency in lab experiments and hopefully leads to faster diagnoses. It also makes troubleshooting easier should problems arise. The more straightforward the system, the more quickly users can learn to use the machine.
We concluded that we would Want a good system to have:
- Low cost: Currently an OpenPCR machine costs $599 and a Fluorimeter costs $300. An inexpensive material would help reduce cost and increase accessibility, since there is always a limited budget for new equipment. This would not only allow users to increase the amount of tests that can be run at the same time, but also boost sales, which is important for marketing any device.
- integrated camera: phone cameras are easily moveable and vary in size and quality, leading to differing results. Smartphone camera settings can be time consuming or nonexistent. Having a built-in camera increases cost, but it is worth it to increase speed and accuracy. Furthermore, the program is simpler because it does not have to adjust to different cameras and phone sizes and shapes vary enough to make building a cradle to fit them difficult.
We concluded that a good system Must Not Have:
- Troublesome USB Connectivity. USB connectivity should function well in order for OpenPCR machine to work.
- Casing = fire hazard. High temperature with PCR can be dangerous.
We concluded that a good system Should Avoid:
- Avoid slow amplification.
- Hard to adjust phone/ fluorimeter. The phone can be easily moved by accident, which requires readjustment between the phone and the fluorimeter.
New System: Machine/ Device Engineering
SYSTEM DESIGN
Current design of fluorimeter
Rather than drastically change a fairly-efficient PCR machine, we decided that the fluorimeter setup was more in need of modification. The only change to the PCR machine would be improved USB ports, but the fluorimeter would have a built-in camera to remove the complications of positioning a camera phone. The phone would still be used to run the machine, but it wouldn't directly take the pictures. This new camera would take the place of the current cradle and be at a fixed position in respects to the fluorimeter for most efficient photographing. Also, the slots on the board of the fluorimeter would be labeled to avoid confusion in the process of analysis.
KEY FEATURES
Fluorimeter - We chose to include these new features:
Integrated Camera - helps reduce inconsistency of photography and time-consuming difficulty of positioning
Labeled slots - reduces likelihood of error from misidentified photographs
PCR Machine - We chose keep these features the same as the original system:
Reliable Hardware - the machine is sturdy and does its job efficiently considering its simple construction
Preexisting Software - the current Open PCR software is well developed and user-friendly
INSTRUCTIONS
Step 1: Connect the camera unit to the fluorimeter.
Step 2: Adjust the camera settings according to the current experiment.
Step 3: Link the camera to the phone being used to control the experiment.
Step 4: Take photo.
Step 5: Upload photo for necessary manipulation.
New System: Protocols
DESIGN
We chose to modify the hardware of the fluorimeter. However, overall protocols should remain the same.
As the PCR machine was not modified, its protocols will also remain unaltered.
MATERIALS
Supplied in the Kit
Amount
Camera Unit
1
Reaction mix
8 tubes
Battery
1
Software
freeware
Supplied by the User
Amount
Filter water
1,000μL
SYBR Green
2,000μL
Primers
4,000μL
DNA sample (negative and positive)
5 tubes of varying concentration
PROTOCOLS
PCR Protocol
Step 1: Reaction mix
Step 2: Add 2.5 μL of negative and positive DNA sample
Step 3: Fluorometer gave the sample result
DNA Measurement and Analysis Protocol
Step 1: Set up the equipment
Step 2: Put the smart phone and fluorometer in the dark box
Step 3: Major the distance between the fluorometer and phone.
Step 4: Run the samples
Step 5: Take a picture of the experiment
Step 6: Repeat this trial with different samples
Step 7: Use Image J and make a circle around the drop.
New System: Research and Development
BACKGROUND
CHEK2 is a gene located at chromosome 22. It provides instructions for making protein call checkpoint kinase 2. The checkpoint kinase acts as a tumor suppressor. Mutations of CHEK2 gene can lead to breast cancer, Li-Fraumeni syndrome, and other type cancers and diseases.
Design specification 1 - explanation of how an aspect of the primers addresses any of the specifications in the "New System: Design Strategy" section
Design specification 2 - explanation of how an aspect of the primers addresses any of the specifications in the "New System: Design Strategy" section
Etc.
New System: Software
[THIS SECTION IS OPTIONAL. If your team has creative ideas for new software, and new software is a key component included in your new protocols, R&D, or machine design, you may describe it here. You will not receive bonus points, but a solid effort may raise your overall page layout points. If you decide not to propose new software, please delete this entire section, including the ==New System: Software== header.]