BioMicro Center News
JANUARY 9, 2013
Happy new years to everyone. A couple new things happening in BioMicro that we want to make everyone aware of.
OCTOBER 9, 2012
A quick, almost all Illumina, update:
First, the Illumina loaner HiSeq is now up and running and we are running at full speed. Our last full flowcell in the queue is loading this week so we should finally be back to normal (hopefully). We cannot prevent instrument failure but at least any issues should have less of a negative impact for the 6 weeks or so while the loaner is here (in other words, if you have time sensitive samples, now is the time to get them in).
Second, our MiSeq is scheduled for its upgrade in the next two weeks. This will make two changes. First, the number of reads per run will increase significantly – from ~5m to ~15m. Secondly, the upgrade will add a third tier of read lengths – 500nt. The 500nt run will cost a few hundred more than the 300nt run and will take a second day, but will give us read lengths longer than anything else in the BioMicro Center.
Third, Illumina is having a user meeting on Thursday over at the Hyatt. The meeting is likely to be at least moderately technical but is free if you are interested in going. Registration is at: http://eventregistration.illumina.com/d/scqsm0/4W
"The Boston User Group Meeting: Continuing advances in Illumina’s genomic analysis technologies are rapidly changing the way scientists in a variety of disciplines approach their research. Through a series of local user group meetings, Illumina is providing an opportunity for our customers to showcase their research as well as a forum to discuss protocol optimization and bioinformatics solutions. Additionally, you will hear about the latest updates to our products and enhancements to the Illumina Next Generation Sequencing workflow, as well as have the opportunity to interact with key vendors who provide products that support the NGS workflow. Continental breakfast, breaks, and lunch will be provided."
Finally, a couple quicker notes:
SEPTEMBER 19, 2012
We hope everyone had a great summer. A couple of updates for you:
First, and most importantly, I know a lot of you have been affected by very long Illumina turnaround times for HiSeq samples, and especially those for long reads. Our HiSeq has had a very large run of failures this summer and it is affecting everyone. Short reads have been able to sneak through between the failures, so the problem is not quite as bad there, but we have been working very hard with Illumina to get the HiSeq back running efficiently. I can finally report some good news on this front. First, Illumina is shipping us a second HiSeq this week to help us clear through the back log. In addition, we are enormously grateful to the Biopolymer core at the KI which has taken several of our backlogged flowcells and is helping us work through the queue. Hopefully, these changes will allow us to get on top of our queue and get sequencing turn around back to where it should be.
On a more positive note, we have been able to significantly increase our throughput in quality control for Illumina over the past few months. First, we have begun using the Advanced Analytical Fragment Analyzer (donated by the Dept. of Biology) to replace the Agilent Bioanalyzer for Illumina libraries. The fragment analyzer uses capillary electrophoresis to measure fragment length and quantity of DNA and RNA molecules much the same way the BioAnalyzer does. However, unlike the bioanalyzer, it can run unattended, allowing us to process more samples per day. It also appears to have a lower failure rate and a broader dynamic range, both key elements in our analysis. In addition, through a collaboration with the new KI High Throughput Screening Core, we have been able to automate our qPCR analysis using the Tecan systems in the BioMicro Center. This is enabling us to run 384 well qPCRs in a much less labor intensive manner while maintaining high quality. We’re still recalibrating our cluster densities using the Tecans but we are very close to having the last few details ironed out.
Couple of other quick notes: - We’ve had a few additions to our staff with Scott Morin joining us as a technical assistant, replacing Kevin Thai, and Margaret Minnig and Kate Tracka joining us from Northeastern for the summer / fall. - The Technology Seminar Series will resume in the spring. We have been too focused on the Illumina issues to schedule the vendors this fall.
JUNE 5, 2012
A couple major Illumina announcements to begin with. First, thanks to the generosity of Dr. Chris Love, the BioMicro Center now has an Illumina MiSeq available. The MiSeq is Illumina’s newest sequencer and is optimized for speed and long read lengths. The MiSeq flowcell contains a single lane with 5 million clusters. While this is well below the 200m reads per lane on the HiSeq, the small surface area enables it to run much faster with a cycle taking only 5 minutes. This means that a 150+150 paired end run can be done in a little over a day, instead of requiring two weeks or more of sequencing. The MiSeq is ideal for applications that do not require enormous read depth, such as microRNA analysis, resequencing of small genomes, barcode sequencing or sequencing amplicons. There are a number of caveats about the MiSeq that can impact your experiment, most notably that there is no separate control lane which means you need to be more careful about base balance, and we are happy to talk with you more about it.
The second announcement is about our venerable GAIIs. As some of you may have noticed, submitting samples for the GAII has been an exercise in extreme patience as we have struggled to fill flowcells due to low demand. The addition of the MiSeq, and some fantastic efforts by Michael Gravina in the lab, has enabled us to rework how we are processing GAII flowcells. We have been able to create partial flowcells on the GAII by altering recipes and making a few minor “modifications”. This has allowed us to move from a model like the HiSeq, where we need a full flowcell before we run, to a model where we can run as soon as the samples pass quality control, more like the MiSeq. However, unlike the MiSeq, we can run multiple lanes at once. Also, running partial flowcells means we can skip parts of the imaging time which does speed up the sequencing (though not to the level of the MiSeq). Some critical caveats: First, these methods are not supported by Illumina, so we cannot offer to replace failed runs. Second, unlike the HiSeq, the PhiX lane is *not* included. You must choose to sequence a lane of PhiX if you want to do control normalization. Finally, this service is completely "a la carte" so the pricing schema is quite different. To go along with these changes, we have completely reworked the Illumina page on our website, so take a look there for more information about the MiSeq, the new GAII methods and pricing.
APRIL 19, 2012
There have been a large number of changes in BioMicro to catch you up on in several different areas since my last newsletter. First, I need to begin by introducing Shmulik Motola, our new lab manager. Shmulik has been on board for several months now and is coordinating the flow of projects through the lab. Shmulik did his graduate work at the Weizmann Institute and was a Postdoctoral Associate in Dr. Ernest Fraenkel’s lab here at MIT. Shmulik is the go to person for questions you have about the status of your projects, Illumina queue times, etc. and can also help you with experimental design (firstname.lastname@example.org)
Second, we have expanded our equipment repertoire with the purchase of a Sage BluePippin preparative electrophoresis system (http://www.sagescience.com/bluepippin/). The Pippin prep is an automated system for extracting bands from agarose gels. We are currently testing the system out and will be deploying it to several of our Illumina library preparation methods. We’re planning to use it as part of the RNAseq methodology to provide much tighter size distributions than the SPRIworks can manage. In addition, high percentage agarose gels should enable us to begin to offer library preparation for small RNA sequencing (contact Shmulik if you would like to volunteer for our beta). Because the BluePippin has a pulse field feature, it should also be useful for building jumping libraries as well as isolating fragments for the new “long read” sequencing technologies, such as Oxford Nanopore. Of course, the Pippin prep is also available for your more “mundane” chores such as isolating bands for cloning.
Finally, our BioInformatics team has had a major overhaul. Dr. Fugen Li left MIT at the end of last year and has been replaced by Dr. Ryan Abo from the Mayo Clinic and Dr. Vincent Butty from Dr. Chris Burge’s lab. Both bring with them years of experience and, along with Dr. Huiming Ding, are available to help with any informatics challenges you have in your research, especially those related to sequencing. In addition to providing direct research support, we are looking forward to offering short classes on informatics beginning in the summer or fall. We’re in the planning stages now so if you have ideas on subjects you would like us to cover, please let us know.
RECENT CHANGES TO THE WEBSITE
23 January 2017
19 January 2017
18 January 2017
16 January 2017