BioMicroCenter:Sequencing Quality Control

From OpenWetWare

(Difference between revisions)
Jump to: navigation, search
(Possible Sample QC Techniques)
(Possible Sample QC Techniques)
Line 21: Line 21:
*Caliper LabChip GX - The LabChip GX produces data similar to that of the 2100 Bioanalyzer, with much higher throughput.  96 samples can be run at one time.  Like the Bioanalyzer, microfluidic technology is used to examine both the size and quantity of nucleic acid by way of differential mobility.  The LabChip GX and Bioanalyzer are used interchangeably, though the LabChip GX is the preferred method for samples with higher concentrations. For results generated with our choice of QC methods, please view the following poster:
*Caliper LabChip GX - The LabChip GX produces data similar to that of the 2100 Bioanalyzer, with much higher throughput.  96 samples can be run at one time.  Like the Bioanalyzer, microfluidic technology is used to examine both the size and quantity of nucleic acid by way of differential mobility.  The LabChip GX and Bioanalyzer are used interchangeably, though the LabChip GX is the preferred method for samples with higher concentrations. For results generated with our choice of QC methods, please view the following poster:
               *[[BioMicroCenter:Sequencing|Bioanalyzer vs. LabChip GX]] - [[Media:BAvsCal.pdf| DOWNLOAD]]  
               *[[BioMicroCenter:Sequencing|Bioanalyzer vs. LabChip GX]] - [[Media:BAvsCal.pdf| DOWNLOAD]]  
-
**The LabChip GX is currently not used for Illumina QC. For sample concentrations and size distributions, we are using the Agilent Bioanalyzer and Advanced Analytical systems interchangeably.**
+
"**"The LabChip GX is currently not used for Illumina QC. For sample concentrations and size distributions, we are using the Agilent Bioanalyzer and Advanced Analytical systems interchangeably.**
* Qubit - The Qubit is a selective flurometer that uses fluorescent dyes specific for dsDNA, RNA or protein to quantify samples. The Qubit is used in the Fraenkel lab to quantify their samples for Solexa sequencing. Information about this application can be found at: http://www.invitrogen.com/site/us/en/home/brands/Product-Brand/Qubit.html
* Qubit - The Qubit is a selective flurometer that uses fluorescent dyes specific for dsDNA, RNA or protein to quantify samples. The Qubit is used in the Fraenkel lab to quantify their samples for Solexa sequencing. Information about this application can be found at: http://www.invitrogen.com/site/us/en/home/brands/Product-Brand/Qubit.html

Revision as of 11:12, 12 July 2012

Image:BioMicroCenter-header6.jpg

Why is QC Important?

It is very important to have a reliable measurement of the amount of starting material so that the sample can be prepared for hybridization and amplification on the flow cell. The ideal sample is a library with 10nM of successfully ligated DNA. A 1.3ng/ul, 200bp sample is approximately 10nM.

As of July 2012 the optimum cluster range is from about 250,000 to 350,000 per tile on the GAIIx and 700,000-900,000 on the HiSeq. It is crucial that we have accurate concentrations on hand to prevent under- and over-clustering. If a sample is loaded at too high of a concentration or the fragment size is highly variable the sequencers will not be able to distinguish between clusters properly, resulting in the loss of reads. If the sample is too dilute the optimum number of reads per lane will not be achieved. Having reliable concentration measurements allows us to optimize the number of reads per lane and maximize the quality of data produced.

HiSeq QC
HiSeq QC

For sample results generated with BioMicro Center's QC methods, please view our QC POSTER

Much effort and time has been spent on optimizing loading concentrations and accounting for variations in various library prep techniques to generate optimal cluster densities on the HiSeq. The following plot shows the optimal cluster range we aim for in each experiment to efficiently generate reads with a high pass filter percentage:

Possible Sample QC Techniques

  • NanoDrop ND-1000- The NanoDrop is one of the most commonly used tools to measure the concentration of DNA in solution. The NanoDrop has a detection limit of about 5ng/ul. Unfortunately, due to noise at the lower detection limit, samples speced on the Nanodrop have not shown reliable results on the Solexa sequencer. We do not recommend using the NanoDrop as the primary method of determining concentration for samples on the Sequencer.
  • 2100 BioAnalyzer - The Bioanalyzer produces data similar to that of gel electrophoresis, although it requires much less sample input (1uL) and provides quantification data in addition to valuable distribution information. Due to the amount of error introduced in low concentration or widely distributed samples the Bioanalyzer is not recommended as the primary method of determining concentration. Samples are run on the Bioanalyzer during sample prep at the outset, and at the conclusion of size selection. Agilent recommends samples within a 5-500pg/ul range for accurate determination of concentration on the High Sensitivity assay. Internal testing is underway to determine the accurate range of quantification, however, the Bioanalyzer's primary function is determination of distribution.
  • Caliper LabChip GX - The LabChip GX produces data similar to that of the 2100 Bioanalyzer, with much higher throughput. 96 samples can be run at one time. Like the Bioanalyzer, microfluidic technology is used to examine both the size and quantity of nucleic acid by way of differential mobility. The LabChip GX and Bioanalyzer are used interchangeably, though the LabChip GX is the preferred method for samples with higher concentrations. For results generated with our choice of QC methods, please view the following poster:
             *Bioanalyzer vs. LabChip GX -  DOWNLOAD 

"**"The LabChip GX is currently not used for Illumina QC. For sample concentrations and size distributions, we are using the Agilent Bioanalyzer and Advanced Analytical systems interchangeably.**

  • PicoGreen - PicoGreen is a fluorescent dye that binds specifically to dsDNA and allows for quantification. PicoGreen can be measured in a few different ways, the Boyer lab uses a photospectrometer and Invitrogen states that the Qubit can also be used. More information can be found at: http://probes.invitrogen.com/media/pis/mp07581.pdf
  • RT-PCR, SYBERgreen assay - This assay uses primers that are specific for the adapters used during the ligation step of sample preparation. This allows for the amount of DNA that will actually bind to the flowcell to be quantified. The RT-PCR assay is recommended in addition to the techniques explained above and provides additional and more precise concentration information.

Flow Cell QC

SYBR Green Cluster Visualization- This protocol allows for the visualization of clusters on a flowcell after amplification and before it is put on the Genome Analyzer. It is especially helpful to ensure proper amplification has occurred if there has been a clog or an error on the cluster station or if an older Cluster Generation kit that may be expired is being used.

Personal tools