Blackburn:Yeast Colony PCR v2.0

From OpenWetWare

(Difference between revisions)
Jump to: navigation, search
Line 1: Line 1:
==Overview==
==Overview==
-
This is a quick and easy yeast colony PCR protocol that does not require zymolyase step.
+
This is a quick and easy yeast colony PCR protocol that does not require zymolyase step.  This new version of the protocol uses 10uL PCR reactions, significantly reducing the reagent costs.
==Materials==
==Materials==
Line 36: Line 36:
##5 min at 95C
##5 min at 95C
##30 cycles of:
##30 cycles of:
-
###5 sec at 95C
+
###10 sec at 95C
-
###10 sec at 55C (or appropriate annealing temperature)
+
###10 sec at 50C (or appropriate annealing temperature)
###1 min/kbp at 72C
###1 min/kbp at 72C
##10 min at 72C
##10 min at 72C

Revision as of 17:58, 20 March 2009

Contents

Overview

This is a quick and easy yeast colony PCR protocol that does not require zymolyase step. This new version of the protocol uses 10uL PCR reactions, significantly reducing the reagent costs.

Materials

Procedure

Yeast Cell Lysis

  1. Aliquot 10uL of 0.02M NaOH into PCR tubes.
  2. Using a sterile pipette tip, pick a small colony and resuspend in NaOH.
    • If the solution is cloudy, you've added enough cells.
  3. Boil the samples on a PCR machine by incubating the tubes at 99C for 10 minutes.
    • In the mean time, prepare the master mix for the PCR reaction.
    • The boiled samples are stable at room temp for some time. Keep on ice or freeze for longer.

PCR

  1. Prepare the master mix solution containing:
    • 2uL 5X Q-solution
    • 1uL 10X PCR Buffer
    • 0.2uL dNTPs (10mM each)
    • 0.2uL foward primer (100uM)
    • 0.2uL reverse primer (100uM)
    • 0.1uL Taq
    • 5.3uL ddH2O
  2. Aliquot 9uL of the master mix solution into fresh PCR tubes.
  3. Transfer 1uL of boiled samples to the master mix aliquots (a multi-channel pipette is helpful here).
  4. Run the following PCR cycle:
    1. 5 min at 95C
    2. 30 cycles of:
      1. 10 sec at 95C
      2. 10 sec at 50C (or appropriate annealing temperature)
      3. 1 min/kbp at 72C
    3. 10 min at 72C

Notes

  • Note that the primer concentration we use is about ten-times more than standard PCR protocols.
  • The PCR product can be loaded onto agarose gels directly without addition of loading buffer.
  • For restriction digestion of the PCR products, use 2uL of the PCR reaction in 20uL total volume.
  • The expected PCR product should be as short as possible. Anything less than 1kbp can be easily amplified.

Contact

Tet (Blackburn Lab)

Personal tools