Conifer RNA prep: Difference between revisions
Line 56: | Line 56: | ||
8. Discard the supernatant carefully. Rinse the pellet in 200 μl of 70% ethanol, the re-centrifuge at 20,000g x 5 minutes, room temperature. | 8. Discard the supernatant carefully. Rinse the pellet in 200 μl of 70% ethanol, the re-centrifuge at 20,000g x 5 minutes, room temperature. | ||
9. | 9. Discard the supernatant carefully. Let the pellet briefly air dry 5 minutes. | ||
10. Thoroughly resuspend the RNA pellet in 400 μl of '''Zymo RNA Lysis buffer''', then resume the Zymo process at step 4. | 10. Thoroughly resuspend the RNA pellet in 400 μl of '''Zymo RNA Lysis buffer''', then resume the Zymo process at step 4. |
Revision as of 18:15, 6 December 2010
Materials Required for Total RNA Extraction from Douglas-fir Needles
Modified Urea/LiCl buffer* (8 M Urea, 3 M LiCl, 1% polyvinylpyrrolidone K-60, 5 mM DTT (add just before use, 1M stock). Modified from Tai et al., 2004, Plant Molecular Biology Reporter 22:93a-93e.
Extraction buffer, 50 ml: Add in this order…
• 20 mL 7.5 M LiCl solution
• 24 grams Urea
• 5 mL 10% PVP K-60 stock solution
---- add water up to 49.5 mL, mix well (heating to 50C may help)
---- just before use, add:
• 0.5 mL of 1 M Dithiothreitol
7.5 M LiCl:
• Ambion RNA Precipitation Solution
Tubes: • Fast-Prep grinding tubes (1 per sample, 2 beads each) • 2 mL centrifuge tube (1 per sample) • 1.5 mL centrifuge tube (2 per sample)
Zymo supplies • Zymo-spin IIIC Column (1), Zymo-spin IIC column (1), collection tube (1), 1.5m L tube (1), RNA Lysis Buffer, RNA Prep Buffer, RNA Wash Buffer (with EtOH added)
Reagents and Materials • DEPC Water, 10% PVP K-60, 1 M DTT, 100% EtOH, 70% EtOH, RNA Storage Solution, Dry Ice flakes or chips (about 5 lbs), water ice.
Method for Total RNA Extraction from Douglas-fir Needles
1. Samples (100 mg-200 mg) should be placed in a Fast-Prep grinding tube containing two ceramic beads (with or without garnet – doesn’t matter)
2. Add flaked dry ice to the 24 position Fast-Prep teflon grind adaptor. Grind tissues using two pulses of 20 seconds each, angular momentum of 4. Make sure that the tissue stays frozen and that it is ground to a fine powder.
3. After grinding, add 1 mL of COLD (4°C) Urea/LiCl RNA Extraction Buffer to each tube. Shake vigorously or Fast-Prep for 10 additional seconds, until the ground dried tissue is completely resuspended.
4. Place the tubes in the centrifuge; spin at 200g x 10 min at 4°C to pellet the cellular debris.
5. Transfer 0.7 mL of supernatant to a clean 1.5 mL RNase-free tube.
6. Incubate supernatant mixture overnight on ice in the 4°C refrigerator.
---- Day 2 ---
7. Centrifuge solution at 20,000g x 30 min, 4°C.
8. Discard the supernatant carefully. Rinse the pellet in 200 μl of 70% ethanol, the re-centrifuge at 20,000g x 5 minutes, room temperature.
9. Discard the supernatant carefully. Let the pellet briefly air dry 5 minutes.
10. Thoroughly resuspend the RNA pellet in 400 μl of Zymo RNA Lysis buffer, then resume the Zymo process at step 4.
---- For simplicity, here is the Zymo process ---
11. Transfer all 400 μl of the RNA/RNA Lysis buffer into a Zymo-Spin IIIC column in a collection tube and centrifuge at 8000g x 30 seconds. Save the flow-through.
12. Add 0.8 volumes (320 μl) of 100% ethanol to the sample/flow-through and mix well.
13. Transfer the mixture to a Zymo-Spin IIC column in a collection tube. Centrifuge at > 12000g x 30 seconds. Discard flow through.
14.Add 400 μl of Zymo RNA Prep Buffer to the column. Centrifuge at > 12000g x 60 seconds. Discard flow through, and replace Zymo-Spin IIC column back into the same collection tube.
15. Add 800 μl Zymo RNA Wash Buffer to the column. Centrifuge at > 12000g x 30 seconds. Discard flow through, and replace Zymo-Spin IIC column back into the same collection tube. Repeat the wash with 300 μl RNA Wash Buffer.
16. Centrifuge the Zymo-Spin IIC column at > 12000g x 2 minutes in the empty collection tube to ensure complete removal of the wash buffer.
17. Carefully remove the Zymo-Spin IIC column from the collection tube and place into an RNase free tube. Add 25 μl of RNA Storage Solution (Ambion) directly to the column; let stand one minute.
18. Centrifuge the Zymo-Spin IIC column at 10000g x 30 seconds to elute RNA.
19. Estimate RNA concentration using Qubit.
20. If DNA needs to be removed, treat with DNA-free Turbo kit (Ambion).
14. Add 400 μL of RNA Prep Buffer to the column. Centrifuge at ≥12000g x 60 seconds. Discard flow through, and replace Zymo-Spin IIC column back into the same collection tube.
15. Add 800 μL RNA Wash Buffer to the column. Centrifuge at ≥12000g x 30 seconds s. Discard flow through, and replace Zymo-Spin IIC column back into the same collection tube. Repeat the wash with 400 μL RNA Wash Buffer.
16. Centrifuge the Zymo-Spin IIC column at ≥12000g x 2 minutes in the empty collection tube to ensure complete removal of the wash buffer.
17. Carefully remove the Zymo-Spin IIC column from the collection tube and place into an RNase free tube. Add 25 μL of RNA Storage Solution directly to the column; let stand one minute.
18. Centrifuge the Zymo-Spin IIC column at 10000g x 30 seconds to elute RNA.
19. Estimate RNA concentration using Qubit.
20. We find very little DNA in our preps, but if DNA needs to be removed, treat with DNA-free Turbo kit (Ambion).
return to Cronn_Lab:Protocols page