Griffin:shRNA Transfection: Difference between revisions

From OpenWetWare
Jump to navigationJump to search
(New page: ==shRNA features== ==shRNA Transfection Reagents== ==shRNA Transfection Procedure== *In a six well tissue culture plate, grow cells to a 50-70% confluency in antibiotic-free normal grow...)
 
No edit summary
Line 2: Line 2:


==shRNA Transfection Reagents==
==shRNA Transfection Reagents==
Gene silencing using RNAi is critically dependent on highly efficient delivery of shRNA or siRNAs into cells. The two conventional reagent types are Cationic lipid-based and Polymeric formulations. All commercial transfection reagents are proprietary formulations that are competing for market share by claiming certain advantages (ie, broad cell type compatibility, low cytotoxicity).
Cationic lipid-based transfection reagents are suitable for transfecting into dividing cell cultures. Commercial examples include: [http://en.wikipedia.org/wiki/Lipofectamine Lipofectamine / L2000], [http://www.dharmacon.com Dharmafect], [http://www.molecula.com/ iFect], and [http://www.mirusbio.com/ TransIT TKO]. work by forming lipsomal vesicles that house the siRNA payload and bleb their way through the living cell membrane and into the cytoplasm. The efficiency of this process must be determined in order to have confidence in the knockdown effects. There are numerous commercial sources for transfection reagents for good reason; there are numerous cell types and lipsome structure will influence transfection efficiency in the multitude of experimental cell types that exist.
Polymeric formulations have been developed and optimized for transfection of shRNA plasmid DNA into the nucleus of cultured eukaryotic cells by vendors such as [http://www.openbiosystems.com/ Open Biosystems]. It is well known that polymers, but not cationic lipids, protect DNA in the  cytoplasm and promote entry into the nucleus of transfected cells (Pollard et al 1998). 
Pollard et al (1998) “Polyethylenimine but Not Cationic Lipids Promotes Transgene Delivery to
the Nucleus in Mammalian Cells”. Journal of Biological Chemistry, 273: 13; 7507–7511. 


==shRNA Transfection Procedure==
==shRNA Transfection Procedure==

Revision as of 11:43, 16 October 2008

shRNA features

shRNA Transfection Reagents

Gene silencing using RNAi is critically dependent on highly efficient delivery of shRNA or siRNAs into cells. The two conventional reagent types are Cationic lipid-based and Polymeric formulations. All commercial transfection reagents are proprietary formulations that are competing for market share by claiming certain advantages (ie, broad cell type compatibility, low cytotoxicity).

Cationic lipid-based transfection reagents are suitable for transfecting into dividing cell cultures. Commercial examples include: Lipofectamine / L2000, Dharmafect, iFect, and TransIT TKO. work by forming lipsomal vesicles that house the siRNA payload and bleb their way through the living cell membrane and into the cytoplasm. The efficiency of this process must be determined in order to have confidence in the knockdown effects. There are numerous commercial sources for transfection reagents for good reason; there are numerous cell types and lipsome structure will influence transfection efficiency in the multitude of experimental cell types that exist.

Polymeric formulations have been developed and optimized for transfection of shRNA plasmid DNA into the nucleus of cultured eukaryotic cells by vendors such as Open Biosystems. It is well known that polymers, but not cationic lipids, protect DNA in the cytoplasm and promote entry into the nucleus of transfected cells (Pollard et al 1998).

Pollard et al (1998) “Polyethylenimine but Not Cationic Lipids Promotes Transgene Delivery to the Nucleus in Mammalian Cells”. Journal of Biological Chemistry, 273: 13; 7507–7511.


shRNA Transfection Procedure

  • In a six well tissue culture plate, grow cells to a 50-70% confluency in antibiotic-free normal growth medium supplemented with FBS.

NOTE: This protocol is recommended for a well from a 6 well tissue culture plate. Adjust cell and reagent amounts proportionately for wells or dishes of different sizes.

NOTE: Healthy and subconfluent cells are required for successful transfection experiments. It is recommended to ensure cell viability one day prior to transfection.

Prepare the following solutions:

NOTE: The optimal shRNA Plasmid DNA:shRNA Plasmid Transfection Reagent ratio should be determined experimentally beginning with 1 μg of shRNA Plasmid DNA and between 1.0 and 6.0 μl of shRNA Plasmid Transfection Reagent as outlined below. Once the optimal shRNA Plasmid DNA:shRNA Plasmid Transfection Reagent ratio has been identified for a given cell type, the appropriate amount of shRNA Plasmid DNA/shRNA Plasmid Transfection Reagent complex used per well should be tested to determine which amount provides the highest level of transfection efficiency. For example, if the optimal shRNA Plasmid DNA:shRNA Plasmid Transfection Reagent ratio is 1 μg:1 μl, then amounts ranging from 0.5 μg/0.5 μl to 2.0 μg/2.0 μl should be tested.

Solution A: For each transfection, dilute 10 μl of resuspended shRNA Plasmid DNA (i.e. 1 μg shRNA Plasmid DNA) into 90 μl shRNA Plasmid Transfection Medium (serum antibiotic free medium).

Solution B: For each transfection, dilute 1 - 6 μl of shRNA Plasmid Transfection Reagent with enough shRNA Plasmid Transfection Medium to bring final volume to 100 μl.

NOTE: Do not add antibiotics to the shRNA Plasmid Transfection Medium.

NOTE: Optimal results may be achieved by using siliconized microcentrifuge tubes.

NOTE: Although highly efficient in a variety of cell lines, not all shRNA Plasmid Transfection Reagents may be suitable for use with all cell lines.

  • Add the shRNA Plasmid DNA solution (Solution A) directly to the dilute shRNA Plasmid Transfection Reagent (Solution B) using a pipette. Mix gently by pipetting the solution up and down and incubate the mixture 15-45 minutes at room temperature.
  • Wash the cells twice with 2 ml of shRNA Transfection Medium. Aspirate the medium and proceed immediately to the next step. NOTE: Do not use PBS as the residual phosphate may compete with DNA and bind the shRNA Plasmid Transfection Reagent, thereby reducing the transfection efficiency.

NOTE: Do not use PBS as the residual phosphate may compete with DNA and bind the shRNA Plasmid Transfection Reagent, thereby reducing the transfection efficiency. For each transfection, add 0.8 ml shRNA Plasmid Transfection Medium to well.

  • For each transfection, add 0.8 ml shRNA Plasmid Transfection Medium to well.
  • Add the 200 μl shRNA Plasmid DNA/shRNA Plasmid Transfection Reagent Complex (Solution A + Solution B) dropwise to well, covering the entire layer.
  • Gently mix by swirling the plate to ensure that the entire cell layer is immersed in solution.
  • Incubate the cells 5-7 hours at 37° C in a CO2 incubator or under conditions normally used to culture the cells.

NOTE: Longer transfection times may be desirable depending on the cell line.

  • Following incubation, add 1 ml of normal growth medium containing 2 times the normal serum and antibiotics concentration (2x normal growth medium).
  • Incubate the cells for an additional 18-24 hours under conditions normally used to culture the cells.

Aspirate the medium and replace with fresh 1x normal growth medium.

  • Assay the cells using the appropriate protocol 24-72 hours after the addition of fresh medium in the step above.

NOTE: Controls should always be included in shRNA experiments. Control shRNAs are available as 20 μg. Each encode a scrambled shRNA sequence that will not lead to the specific degradation of any known cellular mRNA.

NOTE: For Western blot analysis prepare cell lysate as follows: Wash cells once with PBS. Lyse cells in 300 μl 1x Electrophoresis Sample Buffer (sc-24945) by gently rocking the 6 well plate or by pipetting up and down. Sonicate the lysate on ice if necessary.

NOTE: For RT-PCR analysis isolate RNA using the method described by P. Chomczynski and N. Sacchi (1987. Single-step method of RNA isolation by acid guanidinium thiocyanate-phenol-chloroform extraction. Anal. Biochem. 162: 156-159) or a commercially available RNA isolation kit.

shRNA Controls

Negative Control: Untreated Cells. Untreated cells will provide a reference point for comparing all other samples.

Negative Control: Empty construct, containing no shRNA insert; The empty viral particles or DNA are a useful negative control that will not activate the RNAi pathway because it does not contain an shRNA insert. It will allow for observation of cellular effects of the transduction/transfection process. Cells transduced/transfected with the empty control provide a useful reference point for comparing specific knockdown.

Negative Control: Non-targeting shRNA; This non-targeting shRNA is a useful negative control that will activate RISC and the RNAi pathway, but does not target any human or mouse genes. The short hairpin sequence cotnains 5 base pair mismatches to any known human or mouse gene. This allows for examination of the effects of shRNA transduction/transfection on gene expression. Cells transduced/transfected with the non-target shRNA will also provide useful reference for interpretation of knockdown.

Positive Control: Positive reporter vector or lentiviral particles; This is a useful positive control for measuring transduction/transfection efficiency and optimizing shRNA delivery. The GFP Control contains a gene encoding GFP, driven by the CMV promoter. This control provides fast visual confirmation of successful transduction/transfection.

Positive Control: Positive shRNA knockdown control; This control contains shRNA sequence that targets GFP expression. This shRNA control has been experimentally shown to reduce GFP expression. This control serves to quickly visualize knockdown in cells expressing GFP.

Positive Control: Positive shRNA knockdown control; This control contains shRNA sequence that targets eGFP expression (GenBank Accession # pEGFP U476561). The shRNA has been experimentally shown to reduce eGFP expression by 90% in C166-GFP mouse fibroblast cells 48 hours post-transduction by mRNA transcript level. This control serves to quickly visualize knockdown in cells expressing eGFP.

References

Santa Cruz Biotechnology, Inc. System Biosciences


PMID: 12776118