Griffitts:Low-copy plasmid prep

From OpenWetWare
Revision as of 10:19, 12 October 2010 by Matthew B. Crook (talk | contribs) (→‎Qiagen Miniprep)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigationJump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.

Miniprep procedure for large, low-copy plasmids

Procedure

Lysis

  • Set up an overnight culture in 40 mL LB broth
  • Centrifuge for 8 min at 8000 rpm
  • Resuspend in 2.5 mL of resuspension buffer
    • Alternatively, you can use 2.5 mL old Buffer P1*
  • Add 2.5 mL of lysis solution
    • Alternatively, you can use 2.5 mL old Buffer P2*

DNA Isolation

  • Add 2.5 mL of neutralization solution
    • Alternatively, you can use 2.5 mL old Buffer N3*
  • Centrifuge at 13,000 rpm for 8 min
  • Transfer 6.5 mL of supernatant to 15-mL Falcon tube
  • Add 50 μL of RNAse A
    • If you're using old buffers, you can just leave it on the bench top for 5–10 minutes to allow the native RNAses to work
  • Let sit at RT for 5 min
  • Add 6.5 mL of isopropanol
  • Incubate at –20°C for 30 min
  • Centrifuge in clinical (yellow) centrifuge for 10 min at max speed
  • Pour off supernatant
  • Resuspend pellet in 1 mL 70% ethanol
  • Centrifuge for 5 min in the clinical centrifuge at max speed
    • The clinical centrifuge is the yellow centrifuge by the lab autoclave
  • Discard supernatant

Qiagen Miniprep

  • Resuspend DNA pellet in 250 μL of Buffer P1
    • The P1 is kept in the fridge
    • Make sure to use P1 that has RNAse added
  • Add 250 μL of Buffer P2
  • Immediately invert 3 times
  • Let stand for 2 minutes
  • Add 350 μL of Buffer N3
  • Immediately invert 8 times
  • Keep on ice for 5 min
  • Centrifuge at 13,000 rpm for 6 min in microfuge
  • Carefully move the supernatant (~820 μL) to a spin column
  • Centrifuge for 30 seconds at full speed
  • Remove flowthrough
  • Add 700 μL of wash buffer PE to column
  • Centrifuge for 30 seconds at full speed
  • Remove flowthrough
  • Centrifuge for another 60 seconds at full speed
  • Move column to a labeled 1.5 mL microcentrifuge tube
  • Add 70 μL T3E0.3 (preheated to 65°C) directly to disk
    • Don't touch the membrane with your tip
    • Note that T3E0.3 must be added to the column hot for efficient elution of large (20 kb) plasmids
  • Let stand 1–2 minutes
  • Centrifuge for 60 seconds at full speed to elute DNA

*The old buffers are kept in a Qiagen box on the upper shelf