IGEM:Harvard/2006/DNA nanostructures

From OpenWetWare

(Difference between revisions)
Jump to: navigation, search
m (Protocols)
(Protocols: redo of protocol to 2 {{ul}} with Dr. Shih's suggestions)
Line 75: Line 75:
====Protocols====
====Protocols====
-
Potential protocol for 10 {{ul}} incubation reaction
+
Potential protocol for a 2 {{ul}} incubation reaction (revised with Dr. Shih's suggestions)
* Reconsitute lyophilized [http://www.sigmaaldrich.com/catalog/search/ProductDetail/SIAL/T6634 bovine thrombin]
* Reconsitute lyophilized [http://www.sigmaaldrich.com/catalog/search/ProductDetail/SIAL/T6634 bovine thrombin]
** biuret is 745 NIH units = 637 {{ug}} (1170 NIH units = 1 mg)
** biuret is 745 NIH units = 637 {{ug}} (1170 NIH units = 1 mg)
** "A suggested concentration for preparation of a stock solution is 100 units/ml. The solution should contain approximately 0.1% BSA for stability and is stable for about one week at 0-5 °C. Since thrombin solutions adsorb to glass, it is recommended to aliquot the solution in plastic tubes and store at -20 °C or below." [http://www.sigmaaldrich.com/sigma-aldrich/product_information_sheet/t6634pis.pdf]
** "A suggested concentration for preparation of a stock solution is 100 units/ml. The solution should contain approximately 0.1% BSA for stability and is stable for about one week at 0-5 °C. Since thrombin solutions adsorb to glass, it is recommended to aliquot the solution in plastic tubes and store at -20 °C or below." [http://www.sigmaaldrich.com/sigma-aldrich/product_information_sheet/t6634pis.pdf]
-
** Reconstitute 745 NIH units in 98 {{ul}} 1% BSA and 882 {{ul}} water (0.98 mL total) to give a working stock of 760 units / mL = 650 {{ug}} / mL = 10 nmol / mL = 10 {{um}} (formula weight is approximately 65 kDa) [http://www.sigmaaldrich.com/sigma-aldrich/product_information_sheet/t6634pis.pdf]
+
** Reconstitute 745 NIH units in 0.49 mL 1% BSA and 4.41 mL water (4.90 mL total) to give a working stock of 152 units / mL = 130 {{ug}} / mL = 2 nmol / mL = 2 {{um}} (formula weight is approximately 65 kDa [http://www.sigmaaldrich.com/sigma-aldrich/product_information_sheet/t6634pis.pdf])
* In a 0.2 mL PCR tube, mix:
* In a 0.2 mL PCR tube, mix:
-
** 2 {{ul}} of 5x [[IGEM:Harvard/2006/Stock_solutions#Bock.27s_selection_buffer|Bock's selection buffer]]
+
** 0.5 {{ul}} of 4x (not 5x) [[IGEM:Harvard/2006/Stock_solutions#Bock.27s_selection_buffer|Bock's selection buffer]]
-
** 2 {{ul}} of 10 {{um}} scaffold DNA (final concentration: 2 {{um}} = 20 pmol)
+
** 1.0 {{ul}} of 2 {{um}} aptamers (final concentration: 1.0 {{um}} = 2 pmol)
-
** 2 {{ul}} of 10 {{um}} oligos (final concentration: 2 {{um}} = 20 pmol)
+
** 0.5 {{ul}} of 2 {{um}} thrombin (final concentration: 0.5 {{um}} = 1 pmol)
-
** 2 {{ul}} of 10 {{um}} aptamers (final concentration: 2 {{um}} = 20 pmol)
+
* OR in a 0.2 mL PCR tube, mix:
-
** 1 {{ul}} of 10 {{um}} thrombin (final concentration: 1 {{um}} = 10 pmol)
+
** 0.5 {{ul}} of 4x (not 5x) [[IGEM:Harvard/2006/Stock_solutions#Bock.27s_selection_buffer|Bock's selection buffer]]
-
** 1 {{ul}} of dH<sub>2</sub>O
+
** 0.5 {{ul}} of 2 {{um}} aptamers (final concentration: 1.0 {{um}} = 1 pmol)
 +
** 1.0 {{ul}} of 2 {{um}} thrombin (final concentration: 0.5 {{um}} = 2 pmol)
* Alternative mix: Liu uses 10 pmol of DNA (1 {{ul}} of 10 {{um}}) and varies thrombin amount from 2 pmol (1 {{ul}} of 0.2x thrombin working stock) to 100 pmol (1 {{ul}} of 10x thrombin working stock)
* Alternative mix: Liu uses 10 pmol of DNA (1 {{ul}} of 10 {{um}}) and varies thrombin amount from 2 pmol (1 {{ul}} of 0.2x thrombin working stock) to 100 pmol (1 {{ul}} of 10x thrombin working stock)
* Incubate at room temperature for 30 min.
* Incubate at room temperature for 30 min.
* Load onto a non-denaturing polyacrylamide gel (10% to 20% gradient)
* Load onto a non-denaturing polyacrylamide gel (10% to 20% gradient)
** Liu runs at 25 mA for 48 h.
** Liu runs at 25 mA for 48 h.
-
[[User:Matthewmeisel|Matthewmeisel]] 17:52, 10 July 2006 (EDT)
+
[[User:Matthewmeisel|Matthewmeisel]] 11:11, 11 July 2006 (EDT)
====Bibliography====
====Bibliography====

Revision as of 10:11, 11 July 2006

Contents

Project Overview

  • Our goal is to to design and implement molecular containers, which can be dynamically opened and closed by an external stimulus.
  • The containers will be implemented as DNA nanostructures, which afford a significant degree of positional control and chemical versatility.
  • As an initial proof-of-concept, we plan to use our DNA containers to demonstrate controllable activation ("delivery") of anti-thrombin aptamers.
  • We expect that molecular containers could have several interesting scientific and clinical applications, such as
    • Drug and gene delivery
    • Bio-marker scavenging (early detection of biomarkers)
    • Directed evolution (compartmentalized selections)
    • Using multiplexing for combinatorial chemical synthesis
    • Capture and stabilization of multiprotein complexes
    • Protein folding (chaperones)
    • Cell sorting

Container Specs

Image:iGEM_harv06_mattspecs.gif

Container Designs

Latch Designs

Coding

Existing code

Thrombin-aptamer experiments

Questions / procedures

  • what percent gel? 10% to 20% polyacrylamide gels, no SDS (but would make for a good control)
  • what incubation conditions?
  • how much protein and DNA? protein at 1 μM, DNA at 2 μM
  • Coomassie stain

Experiments

number thrombin aptamer nanotube DNA-stained prediction protein-stained prediction
0---no bandsno bands
1--+slow band (nanotube)no bands
2-+-fast band (aptamer)no bands
3-++slow band (aptamer-nanotube), traces of fast band (aptamer)no bands
4+--no bandsfast band (thrombin)
5+-+slow band (nanotube)fast band (thrombin)
6++-medium band (aptamer-thrombin), fast band (aptamer)medium band (aptamer-thrombin), traces of fast band (thrombin)
7+++very slow band (thrombin-aptamer-nanotube), slow band (aptamer-nantotube), traces of fast band (aptamer)very slow band (thrombin-aptamer-nanotube), medium band (aptamer-thrombin), traces of fast band (thrombin)

Buffers

  • Macaya's and Bock's selection buffer: 20 mM Tris-acetate, pH 7.4, 140 mM NaCl, 5 mM KCl, 1 mM CaCl2, 1 mM MgCl2
  • Liu's incubation buffer: 40 mM Tris, 20 mM CH3COOH, 2mM EDTA, 12.5 mM (CH3COO)2Mg, pH 8.0
  • Liu's PAGE buffer: 1x TAE/Mg2+

Protocols

Potential protocol for a 2 μL incubation reaction (revised with Dr. Shih's suggestions)

  • Reconsitute lyophilized bovine thrombin
    • biuret is 745 NIH units = 637 μg (1170 NIH units = 1 mg)
    • "A suggested concentration for preparation of a stock solution is 100 units/ml. The solution should contain approximately 0.1% BSA for stability and is stable for about one week at 0-5 °C. Since thrombin solutions adsorb to glass, it is recommended to aliquot the solution in plastic tubes and store at -20 °C or below." [1]
    • Reconstitute 745 NIH units in 0.49 mL 1% BSA and 4.41 mL water (4.90 mL total) to give a working stock of 152 units / mL = 130 μg / mL = 2 nmol / mL = 2 μM (formula weight is approximately 65 kDa [2])
  • In a 0.2 mL PCR tube, mix:
    • 0.5 μL of 4x (not 5x) Bock's selection buffer
    • 1.0 μL of 2 μM aptamers (final concentration: 1.0 μM = 2 pmol)
    • 0.5 μL of 2 μM thrombin (final concentration: 0.5 μM = 1 pmol)
  • OR in a 0.2 mL PCR tube, mix:
    • 0.5 μL of 4x (not 5x) Bock's selection buffer
    • 0.5 μL of 2 μM aptamers (final concentration: 1.0 μM = 1 pmol)
    • 1.0 μL of 2 μM thrombin (final concentration: 0.5 μM = 2 pmol)
  • Alternative mix: Liu uses 10 pmol of DNA (1 μL of 10 μM) and varies thrombin amount from 2 pmol (1 μL of 0.2x thrombin working stock) to 100 pmol (1 μL of 10x thrombin working stock)
  • Incubate at room temperature for 30 min.
  • Load onto a non-denaturing polyacrylamide gel (10% to 20% gradient)
    • Liu runs at 25 mA for 48 h.

Matthewmeisel 11:11, 11 July 2006 (EDT)

Bibliography

  1. Schultze P, Macaya RF, and Feigon J. . pmid:8107090. PubMed HubMed [tha1]
  2. Liu Y, Lin C, Li H, and Yan H. . pmid:15945116. PubMed HubMed [tha2]
  3. Li WX, Kaplan AV, Grant GW, Toole JJ, and Leung LL. . pmid:8298130. PubMed HubMed [tha3]
  4. Bock LC, Griffin LC, Latham JA, Vermaas EH, and Toole JJ. . pmid:1741036. PubMed HubMed [tha4]
  5. Macaya RF, Schultze P, Smith FW, Roe JA, and Feigon J. . pmid:8475124. PubMed HubMed [tha5]
All Medline abstracts: PubMed HubMed

Presentations

Most recent (Week 3)

Week 2: Original proposal

Working Team Members

Personal tools