IGEM:IMPERIAL/2007/Projects/Experimental Design/Phase1

• Introduction
• Phase 1
• Phase 2
• Phase 3
• Notes

1. Initial Promoter Testing - IN VIVO

1.1 Initial testing for Cell by Date

Overall Status
Results uploaded !
Construct	Status
pTet-Gfp	Tested - 16/08/2007
pT7-Gfp	Tested - 17/08/2007
pcI-Gfp	ABORTED - Problem with Biobricks

Constructs: pTet-GFP , pT7-GFP ,pcI-GFP

Test to see if construct will express in vivo. Experiments carried out at 37°C in an incubator.

Aims:

• To determine if construct expresses in vivo

	Protocol
Results

[+] Constant Conditions

• 50μl in vitro chassis
• DNA concentration
• Temperature stable at 37°C

[+] Variables

• Rate of GFP synthesis
• Life span of chassis
• Response time

[+] Sampling

• Every 5 minutes.

Repetition:

• 3 repeats

[+] Controls

• Negative Control: E.Coli cultures without GFP expressing machinery
• Positive Control: Diluted GFP in well

Show All DetailsHide All Details

---

1.2 Initial testing for Infector Detector

Overall Status
Results uploaded !
Construct	Status
pTet-LuxR-pLux-GFP	COMPLETED

Construct: pTet-LuxR-pLux-GFP

Test to see if construct will express in vivo. Experiments carried out in incubator at 37^oC at a constant inducer concentration. To do this, we induce E. coli cells transfected with the construct with a known concentrations of AHL. We then record the change in GFP, such that we can calculate the rate of GFP production relative to concentration of AHL in solution.

	Protocol
Results

Aims:

• To determine if construct expresses GFP in vivo

[+] Constant Conditions

• Temperature stable at 37°C
• AHL concentration 1uM

[+] Variables

• Rate of GFP synthesis
• Life span of chassis
• Response time

[+] Sampling

• Every 30 minutes.

Repetition:

• 3 repeats

[+] Controls

• Negative Control: In vivo system with no AHL added
• Positive Control: In vivo system GFP added. Ideal positive control is a construct known to work in this system, however none available at time of testing.

Show All DetailsHide All Details

2. Initial Promoter Testing - IN VITRO

2.1 Initial Testing for Cell by Date

Overall Status
Results uploaded !
Construct	Status
pTet-Gfp	Initial Testing - 21/08/2007
pT7-Gfp	Initial Testing - 21/08/2007
pcI-Gfp	ABORTED - Problem with Biobricks

Constructs: pTet-GFP, pT7-GFP , pcI-GFP


Aims:
Experiment 1 :

• Determine the DNA concentration and purity. From this determine volume of the DNA needed to add to the in vitro expression systems.

	Protocol
Results

Experiment 2:

• To determine which constructs for cell by date expresses in vitro
• To test the pTet and pcI constructs in commercial S30 E.coli cell extract and home made S30 extract
• To test the pT7 construct in commercial S30 T7 cell extract and home made S30 extract.
• To investigate optimum volume of home made S30 extract
• To investigate the differences between home made and commercially bought S30 extract. This is in terms of rates of expression, length of expression and total output.

Status:

• Complete

[+] Constant Conditions

• 2ug DNA added
• 37°C

[+] Variables

• Type of cell extract used : Commercial or home made
• For home made extract we will vary the volumes used

[+] Sampling

• 30minutes

Repetition:

• 2 repeats

[+] Controls

• Negative Control: In vitro system only to measure background fluorescence
• Positive Control: In vitro system with purified GFP added. Ideal positive control is a construct known to work, however, we do not have one available at this stage

Show All DetailsHide All Details

---

2.2 Initial testing for Infector Detector

Overall Status
Results uploaded !
Construct	Status
pTet-LuxR-pLux-GFP	COMPLETED

Construct: pTet-LuxR-pLux-GFP

	Protocol
Results

Test to see if construct will express in vitro. Experiments carried out at incubator at 37^oC and under an inducer concentration that was shown to give a high induction in vivo.

Aims:
Experiment 1 :

• Determine the DNA concentration and purity. From this determine volume of the DNA needed to add to the in vitro expression systems.

Experiment 2:

• To determine if the infecter detector construct expresses in vitro
• To Test the construct in home made and in commercial e.coli cell extract

Status:

[+] Constant Conditions

• 37 ^oC
• DNA added 2μg

[+] Variables

• Type of cell extract used : Commercial and home made cell extract
• AHL concentration added: 1uM

[+] Sampling

• Every 30 minutes initially and there after adjust sampling accordingly.

Repetition:

• 3 repeats

[+] Controls

• Negative Control: In vitro system with no AHL added
• Positive Control: In vitro system with purified GFP added

Show All DetailsHide All Details

3.1 Investigate optimum counting time for fluorodetector

Status
Results uploaded !
Planned for 21/08/2007	COMPLETED

Construct: pTet-GFP

A test to see what is the optimum counting time to have during our experiments. The counting time is the time the fluorometer detector stays on top of each well. A small window time will only account for very discrete levels of fluorescence. These might include sudden spikes of radiation since fluorescence is not a uniform process. Hence we will get variation between samples of equal expression rates. A larger counting time results in a larger window size and hence a more average reading is taken from each sample smoothing out the variation due to the randomness of fluorescence emition.
Care must be taken however because larger counting times will lead to faster fluorescence bleaching. A comprimise between the two must be found.

	Protocol
Results

Aims:
Determine the optimum counting time for the fluorometer. Avoid fluorescence bleaching.

[+] Constant Conditions

• Temperature: 25 ^oC (Room temperature)
• 200 µl aliquots from pTet culture in each well

[+] Variables

• Vary the counting time of the fluorometer from 0.15 sec to 1.05 sec.
• The counting times tested will be : 0.15, 0.30, 0.45, 0.60, 0.75, 0.90, 1.05 sec

[+] Sampling

• Take readings every 5 minutes for 1 hour.

Repetition:

• 4 repeats

[+] Controls

• Negative Control: E.Coli cultures without GFP expressing machinery
• Positive Control: Diluted GFP in well

Show All DetailsHide All Details

3.2 Investigate the efficiency of a 1:1 mixture of commercial and homemade extract

Status
Planned for 29/08/2007	COMPLETED

Construct: pTet-GFP

This experiment is done to test if the commmercial cell extract and pre-incubation mix, if mixed in a ratio of 1:1 with the home made cell extract and reaction buffer, will produce sufficiently satisfying results to be used for carrying out the rest of the experiments for CELL BY DATE and INFECTOR DETECTOR.

	Protocol
Results

Aims:
To determine the working efficiency of the mixture of commercial and home-made cell extracts.

[+] Constant Conditions

• Temperature: 25 ^oC (Room temperature)
• 20 µl aliquots from the commercial cell extract mixture in each well
• 20 µl aliquots from the home made cell extract mixture in each well
• 20 µl of plasmi DNA in each sample

[+] Variables

-

[+] Sampling

• Take readings at every 30 minutes interval.

Repetition:

• 4 repeats

[+] Controls

• Negative Control: E.Coli cultures without GFP expressing machinery (empty vector)
• Positive Control: DNA in commercial cell extract

Show All DetailsHide All Details