IGEM:IMPERIAL/2007/Projects/Experimental Design/Phase2

• Introduction
• Phase 1
• Phase 2
• Phase 3
• Notes

1. Common GFP Experiments

[+] 1.1 Fluorescence dependence on volume / medium

1.1 Fluorescence dependence on volume / medium

Status
Results uploaded !
Experiment	Status
GFP in water	Completed - 21/8/07
GFP in cell extract	ABORTED

Constructs: None

	Protocol
Results

Aims:

• The aim of the calibration curve is to determine a relationship between molecules of GFP in our cell extract and fluorescence.
  It should be noted that throughout our phase 2 experiments we will be maintaining the volume of cell extract used.
• The purified GFP that we wish to use for our calrbration curve is stored in a solution of buffer.
  Using this GFP there are several approachs to construct a calubration curve, and the purpose of this experiment is to validate one of these method.
  The approaches are:
  

Experiment 1:
To use the GFP solution and create equal dilutions in distilled water and in cell extract. We want to investigate whether FP has the same fluorescence in water and cell extract. Compare the differences (if any) of GFP fluorescence in the two solutions.

Experiment 2:
To maintain the constant volume of cell extract used for phase 2 and add a GFP solution. Our aim is to investigate whether the the total volume of sample has an affect on fluorescence given the moles of GFP are constant.

[+]Constant Conditions and Variables

• Exp 1. : Varying Total volume of sample, volume of cell extract constant
• Exp 2. : Varying volume of cell extract added , total volume constant
• Carry out at room temperature

[+] Sampling

• Carry out several readings to average out
• Vary the flourometer reading window
• 2 Repeats

[+] Controls

• Negative Controls :
  • Cell extract and no GFP
  • Blank wells

Show All DetailsHide All Details

---

[+] 1.2 GFP Calibration Curve

1.2 GFP Calibration Curve

Status
Planned for 31/8/07	First Test COMPLETED

Constructs: None

	Protocol
Results

Aims:
Experiment 1:

• To create a series of dilutions of GFP using a purified sample of GFP

Experiment 2:

• To create a calibration curve to determine: [GFP] in in vitro chassis vs Fluorescence
• This is essential for our data analysis to convert the fluorescence into GFP molecules

Status:

• Purified GFP is to be ordered from clone tech at the moment waiting for a quote from clone tech. Phone Friday 17th August to hurry along.
• Need to finalise which in vitro chassis we will be using for our experiments, will be determined in inital in vitro testing of phase 1

[+] Constant Conditions

• Use a defined in vitro chassis, this will be determined after initial testing. It is most likely we will carry out a calibration curve 100ul commercial extract and a defined amount of home made cell extract
• carry out at room temperature

[+] Variables

• [GFP] added to in vitro chassis varied

[+] Sampling

• Measure after addition of GFP to minimize degradation of GFP

Repetition:

• 3 repeats

[+] Controls

• Negative Control: In vitro systems only with no GFP added
• Positive Control: DEFINE

Show All DetailsHide All Details

---

[+] 1.3 Degradation Time of GFP

1.3 Degradation Time of GFP

Status
Planned for 20/8/07	INCOMPLETE

Test the half life of GFP protein in an in vitro chassis. To test this a purified sample of known [GFP] are added to an in vitro chassis, then fluorescence will be measured at regular time intervals. The fluorescence will be converted into GFP molecules using the calibration curve. This will give; degradation of GFP as a function of time, from this the half life of GFP can be obtained. In addition, temperature may affect the half life of GFP and so the half life will be measured for an appropriate temperature range.

	Protocol
Results

Aims:

• To determine the half life of GFP for a range of temperatures

[+] Constant Conditions:

• 50μl in vitro chassis
• [GFP] added

[+] Variables:

• Temperature range: 10^oC, 15^oC, 20^oC, 25^oC, 30^oC, 37^oC, 45^oC
• Degradation of GFP

[+] Sampling:

• Every 30 minutes.
• carried out over suitable time range - should be able to define after initial testing

Repetition:

• 2 repeats

[+] Controls:

• Negative Control: In vitro system only
• Positive Control: In vitro chassis with high concentration of purified GFP added at high temperature

Show All DetailsHide All Details

2. Project Specific Experiments

[+] 2.1 Cell by Date

[+] 2.1.1 Operating Temperature Range

2.1.1 Operating Temperature Range

Overall Status
Results uploaded !
Construct	Temperature	Status
pTet-GFP	20oC ,37oC	Tested - 30/08/2007

Constructs: pTet-GFP, pT7-GFP , pcI-GFP
Test to determine the operating range of the preferred construct in vitro. Experiments carried out across various temperatures.

	Protocol
Results

Aims:

• To determine if construct expresses in vitro at temperatures of: 10^oC, 12^oC, 20^oC, 25^oC, 30^oC, 37^oC, 45^oC,
• To determine specific life span at each temperature range.
• To determine the maximum rate of GFP produced at each temperature range.

[+] Constant Conditions:

• Defined volume of commercial cell extract
• 2μg DNA concentration

[+] Variables:

• Rate of GFP synthesis
• Life span expression
• Response time to get a fluorescence output
• Temperature: 10^oC, 15^oC, 20^oC, 25^oC, 30^oC, 37^oC, 45^oC,

[+] Sampling:

• Initially every 10 minutes for first hour then adjust to 30minutes
• Also carrying out staggered readings, this is to narrow the gap of missed measurements overnight to 5 hours

Repetition:

• 3 repeats

[+] Controls:

• Negative Control: In vitro system and empty vector
• Positive Control:
  • In vitro system with a vector containing a construct that has been proven to work in vitro
  • In vitro system with purified GFP

Show All DetailsHide All Details

---

[+] 2.1.2 Varying Temperature Changes: Gentle Gradient

2.1.2 Varying Temperature Changes: Gentle Gradient

Status
Planned for 20/8/07	INCOMPLETE

Constructs: pTet-GFP, pT7-GFP or pcI-GFP

	Protocol
Results

Aims:

• To determine the effects of fluorescence with reference to a gentle change in temperature from 4°C to 37°C and vice versa over different time periods.
• Provide results for modelling.
• Investigate k constant as a function of temperature and time.

[+] Constant Conditions:

• 50μl in vitro chassis
• DNA concentration

[+] Variables:

• Rate of GFP synthesis
• Life span of chassis
• Response time
• Temperature change 4^oC, 25^oC, 37^oC
  • Type of gradients: Gentle(1 hour)
  • Temperature change : from 4°C to 25°C, 37°C and vice versa
  • Time period before increment: 30 min, 1h, 2h (to be done in parallel)

[+] Sampling:

• Every 30 min interval.
• Every 15 minutes for 2 hours after change in temperature.
• Every 30 minutes thereafter.

Repetition:

• 3 repeats

[+] Controls:

• Negative Control: In vitro system only
• Positive Control: In vitro system with purified GFP added

Show All DetailsHide All Details

---

[+] 2.1.3 Varying Temperature Changes: Steep Gradient

2.1.3 Varying Temperature Changes: Steep Gradient

Status
Planned for 20/8/07	INCOMPLETE

Constructs: pTet-GFP, pT7-GFP or pcI-GFP

	Protocol
Results

Aims:

• To determine the effects of fluorescence with reference to a steep change in temperature from 4°C to 37°C and vice versa over different time periods.
• Investigate how temperature change affects the rate of expression of GFP
• How the temperature change affects the life span of the system
• How the age of the in vitro system affects the response to temperature in terms of rate of GFP expressed

[+] Constant Conditions:

• 50μl in vitro chassis
• DNA concentration

[+] Variables:

• Rate of GFP synthesis
• Life span of chassis
• Response time
• Temperature change 4^oC, 25^oC, 37^oC
  • Type of gradients: Steep (5 min)
  • Temperature change : from 4°C to 25^oC, 37^oC and vice versa
  • Time period before increment: 30 min, 1h, 2h,

[+] Sampling:

• Every 30 min interval.
• Every 15 minutes for 2 hours after change in temperature.
• Every 30 minutes thereafter.

Repetition:

• 3 repeats

[+] Controls:

• Negative Control: In vitro system only
• Positive Control: In vitro system with purified GFP added

Show All DetailsHide All Details

[+] 2.2 Infector Detector

[+] 2.2.1 Preliminary AHL Sensitivity Testing

2.2.1 Preliminary AHL Sensitivity Testing

Status
Completed 30/8/07	COMPLETED

Construct: pTet - LuxR - pLux - GFP
Aims
Experiment 1:

• Prepare suitable dilutions of AHL

Experiment 2:

• To determine the sensitivity of the construct to AHL concentration.
• This preliminary experiment is to show an approximate range of concentrations that the construct is sensitive to. From this choose more AHL concentrations to test.

	Protocol
Results

Aims:

• To determine approximations of the threshold of response, time of response, life span and rate of GFP produced

[+] Constant Conditions:

• 25 ^oC
• 50μl in vitro chassis
• DNA concentration 2ug

[+] Variables:

• Independent variables :
• [AHL] concentration
  • 10nM, 50nM, 100nM,
• Dependent variables:
  • Rate of GFP produced and total GFP produced
  • Life span of chassis
  • Response time

[+] Sampling:

• Every 10 minutes for first hour and then adjust to 30 minutes

Repetition:

• 3 repeats

[+] Controls:

• Negative Control: In vitro system with no AHL added
• Positive Control: In vitro system with purified GFP added

Show All DetailsHide All Details

---

[+] 2.2.3 Test for AHL Sensitivity

2.2.3 Test for AHL Sensitivity

Status
Planned for 20/8/07	INCOMPLETE

Construct: pTet - LuxR - pLux - GFP
Based upon previous preliminary AHL sensitivity tests, now define a new [AHL] to test and in addition optimise the sampling time and length of testing.

	Protocol
Results

Aims: For each AHL concentration:

• To determine the transfer function of rate of GFP produced
• To determine the maximum rate of GFP produced
• To determine the lifespan of the chassis at varying AHL concentrations
• To determine the lowest threshold of AHL detection
• To determine the response time of the system to AHL detection

[+] Constant Conditions:

• 25 ^oC
• 50μl in vitro chassis
• DNA added 2μg

[+] Variables:

• Independent variables :
• [AHL] concentration
  • Define after initial test
• Dependent variables:
  • Rate of GFP produced and total GFP produced
  • Life span of chassis
  • Response time

[+] Sampling:

• Now defined our range of interest as 1-10nM, first test:
  • 3nM, 5nM, 7nM

Repetition:

• 3 repeats

[+] Controls:

• Negative Control: In vitro system with no AHL added
• Positive Control: In vitro system with purified GFP added

Show All DetailsHide All Details

---

[+] 2.2.4 Temperature sensitivity

2.2.4 Temperature sensitivity

Status
Planned for 20/8/07	INCOMPLETE

Construct: pTet - LuxR - pLux - GFP
To test the affect of temperature on the construct. Measure the sum of the temperature dependent variables by GFP output. Temperature dependent variables include degradation rates, diffusion rates and expression rates. Need to measure a suitable range of temperatures that cover the operating range.

	Protocol
Results

Aims: For three suitable AHL concentration covering a low, intermediate and high induction range test at 37°C

• This is to show that the infecter detector can work at a suitable range, however, we are modeling our system at 25°C

[+] Constant Conditions:

• 50μl in vitro chassis
• DNA added 2μg

[+] Variables:

• Independent variables :
• [AHL] concentration
  • Define after initial test
• Temperature
  • 30^oC and 37^oC
• Dependent variables:
  • Rate of GFP produced and total GFP produced

[+] Sampling:

• Define after initial test

Repetition:

• 3 repeats

[+] Controls:

• Negative Control: In vitro system with no AHL added
• Positive Control: In vitro system with a construct gaurenteed to work

Show All DetailsHide All Details