Jacobs:Protocol Actin Staining

From OpenWetWare

Revision as of 17:44, 15 June 2008 by Sarah Zarrin (Talk | contribs)
(diff) ←Older revision | Current revision (diff) | Newer revision→ (diff)
Jump to: navigation, search

Contents

Materials

  • Cells: NIH/3T3 fibroblasts seeded @1,000 to 3,000 cells/cm2 24 to 48 hrs prior to staining
  • Coverslips
  • Kimwipes
  • Aluminum Foil
  • Pipets/Pipet aid
  • Pipet tips/pipetters
  • Aspirator
  • Timer
  • Waste beaker
  • 50 mL centrifuge tube (“formaldehyde waste”)
  • Markers
  • Gloves
  • Phosphate-buffered saline (PBS), pH 7.4
  • 3.7 % Formaldehyde in PBS (use methanol-free formaldehyde)
  • 0.1 % Triton X-100 solution (in PBS)
  • PAP pen (Sigma Aldrich Cat # Z377821)
  • Vectashield mounting media with DAPI – (Vector Laboratories Cat # H-1200)
  • Clear fingernail polish
  • Primary Blocking Solution: PBS + 1% (w/v) BSA + 0.1% (v/v) Nonidet P40
  • Alexa Fluor 488 Phalloidin Solution: protect from light – (Invitrogen Cat # A12379)

5 uL Alexa Fluor 488 Phalloidin in 200 uL Primary Blocking Solution (for each coverslip area)


Procedure

  1. Wash cells 2X with PBS (10 mL per wash) – remove all PBS from around slide after final wash
  2. Fix cells: apply 2 mL of 3.7% formaldehyde solution on top of slide for 10 min. @ room temp. Note: formaldehyde is toxic; avoid contact with skin, eyes, etc.; dispose of as hazardous waste, do not pour down sink
  3. Wash cells 2X with PBS (10mL per wash) – place waste in the “formaldehyde waste” tube
  4. Permeablize cells: apply 2 mL of 0.1% Triton X-100 solution on top of slide for 5 min. @ room temp.
  5. Wash cells 2X with PBS (10 mL per wash)
  6. Make a PAP pen region the on the slide – see instructions/pattern below
  7. Wash coverslip area 1X with PBS (~200 uL should cover area)
  8. Actin staining: apply 200 uL of Alexa Fluor 488 Phalloidin Solution for 20 min. @ room temp (Protect from light: for all subsequent steps place aluminum foil over culture dish to prevent photobleaching of the Alexa Fluor 488)
  9. Remove the Phalloidin Solution and wash the coverslip area 3X with Primary Blocking Solution
  10. Remove the Blocking Solution and add Vectashield mounting medium (25uL per coverslip area)
  11. Place a coverslip over the stained area and seal the coverslip by pipetting a bead of clear fingernail polish along the edge of the coverslip
  12. Allow the nail polish to dry before viewing on a fluorescent microscope.
    1. Remove the slide from the culture dish and dry the bottom of the slide with a Kimwipe
    2. Place the slide on the pattern
    3. Use a Kimwipe to wipe dry the area in gray (do not disturb the white coverslip area you will be staining)
    4. Apply the PAP pen along the black square around the coverslip area
    5. Dry culture dish, and place slide back in the dish


References

Contact

  • History: CMBL – CRJ/JJR, last updated 8/1/07

or instead, discuss this protocol.

Personal tools