Jacobs:Protocol Subculturing 3T3 Fibroblasts: Difference between revisions

From OpenWetWare
Jump to navigationJump to search
(New page: ==Overview== A general protocol for subculturing cells ==Materials== * 3T3 Fibroblasts (ATCC) * 0.25% Trypsin/0.03% EDTA (Gibco #25200-056) * Complete medium 450 ml DMEM (Gibco #1199506...)
 
No edit summary
 
Line 6: Line 6:
* 3T3 Fibroblasts (ATCC)
* 3T3 Fibroblasts (ATCC)
* 0.25% Trypsin/0.03% EDTA (Gibco #25200-056)
* 0.25% Trypsin/0.03% EDTA (Gibco #25200-056)
* Complete medium  
* Complete medium: 450 ml DMEM (Gibco #11995065) + 50 ml Calf Serum (Gibco #16010159)
450 ml DMEM (Gibco #11995065) + 50 ml Calf Serum (Gibco #16010159)
* PBS
* PBS
* Water bath
* Water bath
Line 14: Line 13:
* Pipet aid
* Pipet aid
* Pipette tips
* Pipette tips
200 l, 1000 l pipetter
* 200 μL, 1000 μL pipetter
15 ml, 50 ml  Falcon tubes
* 15 ml, 50 ml  Falcon tubes
Transfer pipet
* Transfer pipet
Trypan blue
* Trypan blue
Hemocytometer, coverslip
* Hemocytometer, coverslip
Microcentrifuge tubes
* Microcentrifuge tubes
Centrifuge
* Centrifuge
Cell counter
* Cell counter
Timer
* Timer
Waste beaker
* Waste beaker
70% ethanol
* 70% ethanol
Kimwipes
* Kimwipes
Markers
* Markers
Gloves
* Gloves
 




==Procedure==
==Procedure==
1. Heat complete medium, trypsin and PBS to 37ºC in water bath.
# Heat complete medium, trypsin and PBS to 37ºC in water bath.
2. Clean hood with 70% ethanol and bring materials inside hood.
# Clean hood with 70% ethanol and bring materials inside hood.
3. From incubator, remove culture dish and place into hood.  Remove and discard culture media from dish using serological pipet.
# From incubator, remove culture dish and place into hood.  Remove and discard culture media from dish using serological pipet.
4. Wash cells by pipetting 8 ml of PBS in each culture dish.  Remove PBS.
# Wash cells by pipetting 8 ml of PBS in each culture dish.  Remove PBS.
5. Repeat PBS wash.
# Repeat PBS wash.
6. Add 3 ml of trypsin/EDTA to each dish (for 100 mm dish) and return dish to incubator for approximately 5 min.  Look under microscope to check detachment of cells.  Tap side of dish if necessary.
# Add 3 ml of trypsin/EDTA to each dish (for 100 mm dish) and return dish to incubator for approximately 5 min.  Look under microscope to check detachment of cells.  Tap side of dish if necessary.
7. Once cells are detached, add 8-10 ml of complete medium to each dish to neutralize trypsin.  Close lid and gently swirl medium.
# Once cells are detached, add 8-10 ml of complete medium to each dish to neutralize trypsin.  Close lid and gently swirl medium.
8. Pipet entire solution/cells into 50 ml Falcon tube.
# Pipet entire solution/cells into 50 ml Falcon tube.
9. Centrifuge at 1000 rpm for 5 min.  Remember to balance weight.
# Centrifuge at 1000 rpm for 5 min.  '''Remember to balance weight.'''
10. Carefully remove supernatant without disturbing the cell pellet using transfer pipet and pipetter.
# Carefully remove supernatant without disturbing the cell pellet using transfer pipet and pipetter.
11. Resuspend cells in 2 ml complete medium.
# Resuspend cells in 2 ml complete medium.
12. Transfer 50 μL medium/cell into microfuge tube.
# Transfer 50 l medium/cell into microfuge tube.
13. Add 50 μL trypan blue to microfuge tube (dilution factor=2).  Suspend well.
# Add 50 l trypan blue to microfuge tube (dilution factor=2).  Suspend well.
14. Place coverslip over hemocytometer and using same pipetter, add enough solution to fill hemocytometer.
# Place coverslip over hemocytometer and using same pipetter, add enough solution to fill hemocytometer.
15. Count cells under microscope.
# Count cells under microscope. Total number of cells = count x 10,000 (hemocytometer factor) x 2 (dilution factor) x 2 ml (total volume)
Total number of cells = count x 10,000 (hemocytometer factor) x 2 (dilution factor) x 2 ml (total volume)
# Add complete media to 50 ml Falcon tube such that each new plate can receive 1 ml of cells.  For example, if the total cell count is 2,000,000 and you wish to seed 200,000 per dish (i.e., split ratio of 1:10), add 8 ml (8.05 ml to be exact since there should be 1.95 ml already in the tube)of complete media to the 50 ml tube to bring up to 10 ml of complete media.  Mix well and seed 1 ml of cells per dish.
16. Add complete media to 50 ml Falcon tube such that each new plate can receive 1 ml of cells.  For example, if the total cell count is 2,000,000 and you wish to seed 200,000 per dish (i.e., split ratio of 1:10), add 8 ml (8.05 ml to be exact since there should be 1.95 ml already in the tube)of complete media to the 50 ml tube to bring up to 10 ml of complete media.  Mix well and seed 1 ml of cells per dish.
# Add additional complete media to each dish to make 10 ml.
17. Add additional complete media to each dish to make 10 ml.
# Look under microscope to monitor cells and return dish to incubator.
18. Look under microscope to monitor cells and return dish to incubator.
# Clean working space and dispose of biohazard waste.
19. Clean working space and dispose of biohazard waste.
 
 
 
==Notes==
Used at Stanford for Tissue Engineering Lab Course (ME385B and 2007 Winter/Summer TC Workshops
<!--
#List troubleshooting tips here. 
#You can also link to FAQs/tips provided by other sources such as the manufacturer or other websites.
#Anecdotal observations that might be of use to others can also be posted here. 
 
Please sign your name to your note by adding <font face="courier"><nowiki>'''*~~~~''':</nowiki></font> to the beginning of your tip.
-->
 
==References==
<!--'''Relevant papers and books'''
If this protocol has papers or books associated with it, list those references here.  See the [[OpenWetWare:Biblio]] page for more information.
<biblio>


</biblio>-->


==Contact==
==Contact==
*Originally prepared by CRJ-EJC 1/16/04   
*Originally prepared by CRJ-CHK 1/16/04   




Latest revision as of 19:30, 16 June 2008

Overview

A general protocol for subculturing cells

Materials

  • 3T3 Fibroblasts (ATCC)
  • 0.25% Trypsin/0.03% EDTA (Gibco #25200-056)
  • Complete medium: 450 ml DMEM (Gibco #11995065) + 50 ml Calf Serum (Gibco #16010159)
  • PBS
  • Water bath
  • Tissue culture dish
  • Serological Pipets
  • Pipet aid
  • Pipette tips
  • 200 μL, 1000 μL pipetter
  • 15 ml, 50 ml Falcon tubes
  • Transfer pipet
  • Trypan blue
  • Hemocytometer, coverslip
  • Microcentrifuge tubes
  • Centrifuge
  • Cell counter
  • Timer
  • Waste beaker
  • 70% ethanol
  • Kimwipes
  • Markers
  • Gloves


Procedure

  1. Heat complete medium, trypsin and PBS to 37ºC in water bath.
  2. Clean hood with 70% ethanol and bring materials inside hood.
  3. From incubator, remove culture dish and place into hood. Remove and discard culture media from dish using serological pipet.
  4. Wash cells by pipetting 8 ml of PBS in each culture dish. Remove PBS.
  5. Repeat PBS wash.
  6. Add 3 ml of trypsin/EDTA to each dish (for 100 mm dish) and return dish to incubator for approximately 5 min. Look under microscope to check detachment of cells. Tap side of dish if necessary.
  7. Once cells are detached, add 8-10 ml of complete medium to each dish to neutralize trypsin. Close lid and gently swirl medium.
  8. Pipet entire solution/cells into 50 ml Falcon tube.
  9. Centrifuge at 1000 rpm for 5 min. Remember to balance weight.
  10. Carefully remove supernatant without disturbing the cell pellet using transfer pipet and pipetter.
  11. Resuspend cells in 2 ml complete medium.
  12. Transfer 50 l medium/cell into microfuge tube.
  13. Add 50 l trypan blue to microfuge tube (dilution factor=2). Suspend well.
  14. Place coverslip over hemocytometer and using same pipetter, add enough solution to fill hemocytometer.
  15. Count cells under microscope. Total number of cells = count x 10,000 (hemocytometer factor) x 2 (dilution factor) x 2 ml (total volume)
  16. Add complete media to 50 ml Falcon tube such that each new plate can receive 1 ml of cells. For example, if the total cell count is 2,000,000 and you wish to seed 200,000 per dish (i.e., split ratio of 1:10), add 8 ml (8.05 ml to be exact since there should be 1.95 ml already in the tube)of complete media to the 50 ml tube to bring up to 10 ml of complete media. Mix well and seed 1 ml of cells per dish.
  17. Add additional complete media to each dish to make 10 ml.
  18. Look under microscope to monitor cells and return dish to incubator.
  19. Clean working space and dispose of biohazard waste.


Contact

  • Originally prepared by CRJ-CHK 1/16/04


or instead, discuss this protocol.

Retrieved from "https://openwetware.org/mediawiki/index.php?title=Jacobs:Protocol_Subculturing_3T3_Fibroblasts&oldid=212706"