Klapperich Lab:Care and Maintenance of the Napco Incubator

Overview

Replace this sentence with a brief description of the protocol and its goal.

Materials

List reagents, supplies and equipment necessary to perform the protocol here. For those materials which have their own OWW pages, link to that page. Alternatively, links to the suppliers' page on that material are also appropriate.

• supply 1 (i.e. tubes of a certain size? spreaders?)
• reagent 1
• X μL reagent 2
  • component A (reagent 2 is made up of multiple components)
  • component B
• equipment 1
• equipment 2

Procedure

Check that there is water in the basin every two or three days. If the water runs out, the relative humidity will be too low, causing the temperature and CO2 levels to be uncontrollable. If the incubator is over the temperature by several degrees, it may be necessary to reset the incubator. This may be done by turning off the power on the left rear panel of the incubator, while unscrewing the outlet fuse on the rear panel. Allow incubator to return to a temperature below 37.0 0C and restart the incubator, re-screwing the fuse first and then turning on the power.

Notes

1. List troubleshooting tips here.
2. You can also link to FAQs/tips provided by other sources such as the manufacturer or other websites.
3. Anecdotal observations that might be of use to others can also be posted here.

Please sign your name to your note by adding ('''~~~~''') to the end of your tip.

References

Relevant papers and books

1. Goldbeter A and Koshland DE Jr. An amplified sensitivity arising from covalent modification in biological systems. Proc Natl Acad Sci U S A. 1981 Nov;78(11):6840-4. DOI:10.1073/pnas.78.11.6840 |
2. JACOB F and MONOD J. Genetic regulatory mechanisms in the synthesis of proteins. J Mol Biol. 1961 Jun;3:318-56. DOI:10.1016/s0022-2836(61)80072-7 |
3. ISBN:0879697164

Contact

• Who has experience with this protocol?