Klapperich Lab:Notebook/Lab Meeting Notes/2008/08/25: Difference between revisions
Cmklapperich (talk | contribs) No edit summary |
Cmklapperich (talk | contribs) No edit summary |
||
Line 12: | Line 12: | ||
* Cathie Bring IBM laptop and drive from home <br> | * Cathie Bring IBM laptop and drive from home <br> | ||
* No meeting 9/1. <br> | * No meeting 9/1. <br> | ||
* Register for CIMIT conference if you want. Irene can reimburse. <br> | |||
†Flu R01 <br> | †Flu R01 <br> | ||
Line 17: | Line 18: | ||
* Planning plaque assay - protocol decided <br> | * Planning plaque assay - protocol decided <br> | ||
†SEPSIS Project/'''Chip Bonding Issues''' <br> | †SEPSIS Project/'''Chip Bonding Issues''' <br> | ||
* ''Check if Anlee can do backscatter electrons on new SEM'' <br> | * ''Check if Anlee can do backscatter electrons on new SEM'' <br> | ||
Line 27: | Line 26: | ||
* Jaephil will help Sonali get some new material for the sepsis chips. <br> | * Jaephil will help Sonali get some new material for the sepsis chips. <br> | ||
* '''Wash is acetone then methanol sonication + DI water sonication'''. SEE UPDATED PROTOCOL! <br> | * '''Wash is acetone then methanol sonication + DI water sonication'''. SEE UPDATED PROTOCOL! <br> | ||
†COBRA <br> | †COBRA <br> | ||
Line 44: | Line 42: | ||
* Basic software in place <br> | * Basic software in place <br> | ||
†Fraunhofer: LOAC <br> | †Fraunhofer: LOAC <br> | ||
- <br> | - <br> | ||
Line 51: | Line 48: | ||
†Biointerfaces group <br> | †Biointerfaces group <br> | ||
* Brett and Mincheol tried the SU8 process. <br> | * Brett and Mincheol tried the SU8 process. <br> | ||
* Hussam made 6.5 microns SU8 - Using the Hard contact method <br> | * Hussam made 6.5 microns SU8 - Using the Hard contact method <br> | ||
Line 64: | Line 60: | ||
* AZP 4620 from Clariant. Hussam will try this photoresist (positive) <br> | * AZP 4620 from Clariant. Hussam will try this photoresist (positive) <br> | ||
†CIMIT <br> | |||
* Meet with Sepsis Nurse Tuesday. | |||
* Sonali submitted abstract, Qingqing <br> | |||
* Jane submited. <br> | |||
<br> | <br> | ||
Revision as of 07:59, 25 August 2008
25 August 2008 Lab Meeting Agenda
- Announcements
† Discussion of Time for Fall Semester Group Meetings
Type when you are NOT available for group meetings HERE:
Cathie: MW afternoon, F all day
Sonali, Jaephil, MinCheol, open all week
Qingqing T/TH 10-12, 2-4pm, M 12-3, one lab still deciding
† Other Announcements
- Cathie Bring IBM laptop and drive from home
- No meeting 9/1.
- Register for CIMIT conference if you want. Irene can reimburse.
†Flu R01
- Meeting set F afternoon (8/29)
- Planning plaque assay - protocol decided
†SEPSIS Project/Chip Bonding Issues
- Check if Anlee can do backscatter electrons on new SEM
- EF experiments results later today
- Chips did not bond - that were made last weekend.
- Controlled cooling with air plasma bond okay with Zeonor plaque.
- Topas COC resin may be better to try. Try and buy some. (this is what the plaques are made of) The COC might shrink less. (co-polymer).
- Jaephil will help Sonali get some new material for the sepsis chips.
- Wash is acetone then methanol sonication + DI water sonication. SEE UPDATED PROTOCOL!
†COBRA
- Jaephil and Mark making humidity and flowrate control box (temp too) for the concentration system.
- IEEE abstract submitted on 8/24.
- IBC for our lab STILL pending - Alexis will give us the requested revisions
- Cathie will submit this week (8/29)
- Tests on chips with covers underway
- Jane is investigating the multilayer design
† Valve Array
- Cathie contact Sumita Pennarthur at UCSB about her valves
- Waiting for fixture from Melissa
- Mark's Part is complete at this point
- Basic software in place
†Fraunhofer: LOAC
-
- Still troubleshooting
†Biointerfaces group
- Brett and Mincheol tried the SU8 process.
- Hussam made 6.5 microns SU8 - Using the Hard contact method
- Hussam made the PDMS part. Correct part, but overexposed. The thickness is too thin
- Mincheol will try the device as we have it
- Hussam will make 20 micron high with 1 micron space this week/or Brett
- SU8 thickness is important step in this process. So, ALIQUOT SU8 when it arrives.
- Solvent evaporation from the SU8 can be a real problem.
- Use the same spinner every time for this project.
- Wafer cleaning should be the same every time, too
- Hussam, Brett and MinCheol are going to make a protocol for this process
- AZP 4620 from Clariant. Hussam will try this photoresist (positive)
†CIMIT
- Meet with Sepsis Nurse Tuesday.
- Sonali submitted abstract, Qingqing
- Jane submited.
†PCR
†RCA
-
- Working on a test chip to examine mat'ls compatibility
†Senior project
-
†F31: Cochlea
-
- 3 antibodies working
- Renewing animal protocol form
†Silica Optimization (Lambda):
-
|border="1" cellpadding="4" cellspacing="0" style="border:#c9c9c9 1px solid; margin: 1em 1em 1em 0; border-collapse: collapse;" width="800"
|-
|style="background-color: #EEE"| Project name
|style="background-color: #F2F2F2" align="center"|<html><img src="/images/9/94/Report.png" border="0" /></html> Main project page
<html><img src="/images/c/c3/Resultset_previous.png" border="0" /></html>Previous entry<html> </html>Next entry<html><img src="/images/5/5c/Resultset_next.png" border="0" /></html>
|-
| colspan="2"|
|}