27 October 2009 Lab Meeting
- Attending:
- Missing:
- Presentation:Special Guest. Dr.Jonathan Simon. Cathie will present for 15 min. 2pm, PLEASE BE ON TIME.
‡ Announcements
- No meeting on 11/3
- Dr. Shichu Huang from Auburn talking on 11/10. Need folks to have lunch with her at 12pm and also for lab tours and chatting at 4-5pm.
- Oakridge deadline is 1 Feb 2010.
- PAPERS Drafted before MicroTAS Are we done with this?
- Posters for MicroTAS Can Jaephil take them all?
‡ Flu R01:Integration
- New design - address evaporation loss, Reagent delivery and storage solution. Consider marginating flows?
† Sample Concentration (Lead: Jane, Team: Jaephil)
- MDCK Cells are not propagating. Try troubleshooting efforts. Sonali will do on Monday.
- Cassidy needs to see plaque assay again - so when cells are up, she needs training.
- Up to high 10^7 for positive control. Silver substrate no signal.
- Jane working on the cell lysate control.
- Main loss is at the outlet/sample collection: tangential filtration design in drawing stage.
- Contacted EC Shaw about rubber stamp mold for new design for evaporation.
- Set up COMSOL and StarCD, look for governing equations for simulation of evaporation.
- Committee meeting setup
† SPE Column Optimization for RNA. (Lead: Sonali, Team: Hussam, Jessie, Brendan)
- Design three straight channels. A: std channel we already use. B: widest channel possible, C: something in between.Send out masks by 10/21, functional chips to be delivered by 10/26. [Update] functional chips ready by 10/21-22, Experimental results of channels to be delivered on 10/27 [Hussam/Jessie]
- STD recipe, STD silica beads, just A,B, and C.
- controls for these: empties, non-silica monolith and full silica monolith, std. recipe.
- Load DNA in a straw of 5,50,100ul SPE, quick test of hypothesis: more SPE = more DNA, To be repeated with Alex and Mark
- Look into modifying Alex's pneumatic setup for the PATH guys. Instead of building the straw array over here NOTE: Sean
- PLanning net silica per channel experiments. with 700nm, 3x possible. Deliver around 11/5/09.
- New virus prep (JC, 6/11/09), getting Ct's of 27 for 1:16 dilution and 28 for 1:64 dilution. Use more diluted sample for future optimization experiments? Channels were 700nm silica/1X. pfu/ml is 10^6.
- Tried 2 more chips with 3X 0.15um Silica. Chips are breaking b/c of no crosslinking. SPE was coming out even at 2ml/hr flow rate.
- Running no silica and no SPE chips with virus. (JC/RNA)
† PCR - CMI (Lead: Qingqing)
- QQ will work on the initial integration steps of SPE + RT (reservoir)+ PCR.
* New design has been tested
- It solved some problems, however bubbles were still created at the high-temperature section at slow flow rate. And they grow up to big bubbles and did not move along the channel,which affect the moving of reagent.
- some new method will be tested this week to solve this problem.
- primer for toxin A.
a.300nM did not amplify on real-time machine.nothing was detected by bio-analyzer
b.700nM had a ct value of 27.A small peak (0.63ng/ul) was detected on bio-analyzer
- DNA template dilution experiments has been done.
- Primer for toxin B did not work on real-time machine. No result was detected by bio-analyzer.
- PCR2 Paper formatted for LOAC this week.
need to get back from Cathie
- CMK: PCR 1 draft. Analytical Chem. MCK is running more simulations.
† HDA (Lead: Jaephil, Team:Sonali)
- Start planning R01 for Submission on 2/5/10. MM, JD, CMK.
- JD will train QQ how to make HDA chips. This may entail moving from cutter plotter to embossing steps. JD and QQ to meet ASAP to plan the tech transfer.
- Paper submitted 10/6.
‡C. diff Project (Cathie, Sonali, Satish Singh, Lisa J., His post doc )
- Sonali to train Lisa on SPE.
- QQ to run test PCR on chip with genomic DNA and Toxin B primers.
‡ Coulter Flu Fraunhofer Project (Lead: Sonali, Team: Sonali, Jessie, Cathie, CMI Folks, Qingqing)
- Meeting 9am Monday (every other week)
‡ Agilent Automated Sample Preparation (Lead: Alex)
- Machine is now "ready to go". Bacillus subtilis gDNA will be tested this Wednesday (10/28). Bacillus subtilis cells will follow next. Then Hot Dog samples. Quantification through Nano-Drop and RT-PCR.
- First Feedback on Draft Paper (Lysis of Yeast Cells) from Anirban. Work ongoing.
- Nano-C: CNT coated PEEK Samples received. Manufactured first straws with integrated PEEK.
‡ COBRA (Lead: Jaephil, Team: Cathie, Jane for virus only, PHO folks)
- Metal piece modification for the integration - Parts distored and is begin fixed.
- paper 1: Evap with Sol Gel substrate. Not integrated. MSSA, E coli.
‡ Biointerfaces group (Lead: MinCheol, Team: Cathie, MCK, Wong and Meller folks)
- New experiments happening now.
- Cathie will submit paper inquiry.
‡ CIMIT- Sepsis (Lead:Cathie, Team:TBA)
- IRB approved.
- Cathie submitted the companion BU IRB form for exemption. Revised, still still waiting.
‡ PATH Grant (Lead:Cathie, Team:Frank, Sean, Mark, Jake Trueb (ME), Suma)
- Phone meeting with PATH this week. 10/13.
- UGs purchasing parts for straw machine for 709.
- UGs purchasing reagents for running extraction experiments and doing PCR.
- Frank to start running extractions this week.
- Frank contacted Biomatrica (RNAstable) last Thursday via phone and email; has not heard anything back yet.
- Sean is currently working on designing a straw-holding piece for the new fixture in 709.
- Sean met with Alex for an integration of straws on black machine. They sketched a design. Sean will make a professional drawing and create a required parts list. Alex will supervise the design. Before handing in the job to the shop floor, the design will be presented to Cathie.
|