|
|
(7 intermediate revisions by the same user not shown) |
Line 1: |
Line 1: |
| __TOC__
| |
| =DNA Fragment Purification from Acrylamide=
| |
| ==Solutions==
| |
| ===Crush and Soak Solution===
| |
| *500 mM NH4OAc 3.3 g NH4OAc
| |
| *0.1% SDS 0.1 g SDS
| |
| *0.1 mM EDTA 20 ml 500 mM EDTA
| |
| *up to 100 ml with Q
| |
| **store at room temperature
| |
| *3 M NaOAc pH 5.2
| |
| *24.6 g anhydrous sodium acetate
| |
| *pH to 5.2 with acetic acid and bring up to 100 ml with Q
| |
| **store at room temperature
| |
| ===Other Reagents===
| |
| *DMCS treated glass wool (Alltech Assoc. Inc. #4037, 50 g)
| |
| *0.22 mm disposable micro tip filters (syringe type)
| |
| *blue tips with melted tips to serve as pestle for crushing acrylamide
| |
|
| |
|
| ==Procedure==
| |
| *Run a 4-6% acrylamide gel in 1X TBE, stain in EthBr (1-10 mg/ml) and cut out the desired band.
| |
| *Crush the acrylamide with a p1000 tip with a melted end to resemble a pestle for the eppendorf "mortar."
| |
| *Add 1 ml crush and soak solution and incubate overnight at 37° C.
| |
| *Spin in the microfuge for 10 minutes at 14,000 rpm. Remove as much liquid as possible and add another 500 microliters of crush and soak solution.
| |
| *Repeat the spin and pool the recovered supernatant.
| |
| *Add 0.1 volume of 3M NaOAc, 2.5 volumes of EtOH and carrier (see above).
| |
| *Spin as usual, wash and dry. Resuspend in 20 microliters TE.
| |
|
| |
| =Re-cloning of [His]<sub>6</sub>=
| |
| Due to lack of material, I could not recover the A plasmid and have to re-clone it.
| |
|
| |
| ==PCR set-up==
| |
| *100 ul total reaction volume
| |
| *1ul template DNA @ ~40ng/ul
| |
| *200pmol primer mix
| |
| *97ul Taq SuperMix
| |
| ===Pipetting scheme===
| |
| Labels in the respective field codes
| |
| {| border="1"
| |
| ! Primer !! Tube Label
| |
| |-
| |
| ! A his6 2F&R 200pmol
| |
| | A1
| |
| |-
| |
| ! A his6 2F&R 200pmol
| |
| | A2
| |
| |}
| |
|
| |
| ===Thermal profile===
| |
| #92 deg C - 5min
| |
| #92 deg C - 30s
| |
| #50 deg C - 45s
| |
| #72 deg C - 120s
| |
| #Cycle back to 2. 29X
| |
| #72 deg C - 10min
| |
| #4 deg C - indefinite
| |
| ==Gel image==
| |
| Loaded 10ul, i.e. 10% of Rx on the gel; 10ul 2-log ladder as well
| |
|
| |
| ==Restriction digest==
| |
| *Use Qiagen PCR cleanup kit to remove salts and enzymes
| |
| *Digest PCR amplicons with KpnI, Hind III - double digest for 2h
| |
| **Using Hind II might have been a mistake - a 200bp band showed up where it shouldn't have been -> heck cut sites.
| |