Mathies:Drilling in BNC

From OpenWetWare

(Difference between revisions)
Jump to: navigation, search
(New page: Category:Protocol Category:Microfluidics <!-- COPY EVERYHING BELOW HERE TO START YOUR OWN PROTOCOL! --> ==Drilling in BNC== '''->READ first<-''' Make sure you have read the e...)
Line 7: Line 7:
==Drilling in BNC==
==Drilling in BNC==
-
'''->READ first<-'''
+
'''READ first'''
Make sure you have read the entire operation manual BEFORE asking for a training session with Erik Jensen. His email is erik_jensen [at] berkeley [dot] edu. You may have other options (easier ways) than using a CNC mill.
Make sure you have read the entire operation manual BEFORE asking for a training session with Erik Jensen. His email is erik_jensen [at] berkeley [dot] edu. You may have other options (easier ways) than using a CNC mill.

Revision as of 22:35, 29 July 2009



Drilling in BNC

READ first

Make sure you have read the entire operation manual BEFORE asking for a training session with Erik Jensen. His email is erik_jensen [at] berkeley [dot] edu. You may have other options (easier ways) than using a CNC mill.


Procedure

Please refer to the manual. You can download it here.


Contact

or instead, discuss this protocol.

Personal tools