Muratore:Protocols/PCR/Quikchange: Difference between revisions

From OpenWetWare
Jump to navigationJump to search
(wrong volumes in table and added note about dNTPs)
No edit summary
Line 1: Line 1:
==Basic QuikChange protocol==
{|border="1"
{|border="1"
|+
|+
Line 8: Line 9:
|-
|-
!Experimental
!Experimental
|12 μL ||5 μL ||5 μL ||10 μL ||10 μL ||2 μL ||1 μL ||50 μL
|17 μL ||5 μL ||5 μL ||10 μL ||10 μL ||2 μL ||1 μL ||50 μL
|-
|-
!(-) Control
!(-) Control
|13 μL ||5 μL ||5 μL ||10 μL ||10 μL ||2 μL ||0 μL ||50 μL
|18 μL ||5 μL ||5 μL ||10 μL ||10 μL ||2 μL ||0 μL ||50 μL
|}
|}
:* Add each from left to right. Mix and spin before adding Pfu Turbo. Gentle mixing and spin after Pfu Turbo. Don't mix in wax.
:* Add each from left to right. Mix and spin before adding Pfu Turbo. Gentle mixing and spin after Pfu Turbo. Don't mix in wax.
Line 20: Line 21:
:# 1'/kb @ 68°C
:# 1'/kb @ 68°C
:# repeat steps 2-4 x 15 (for one base change) or 17 (for more than one base change) more times
:# repeat steps 2-4 x 15 (for one base change) or 17 (for more than one base change) more times
:# 15' @ 68°C
:# hold @ 4°C
==2-stage QuikChange protocol==
This protocol is based on the report by Wang & Malcolm. (1999) Biotechniques '''26''':680-682. It is especially helpful for large inserts.
{|border="1"
|+
'''1st stage'''
|-
!Tube !!sterile H<sub>2</sub>O !!Pfu Buffer !!Template !!For primer !!Rev primer !!dNTPs !!Pfu Turbo !!wax
|-
! !! !!(10X) !!(10 μg/mL) !!(12.5 ng/μL) !!(12.5 ng/μL) !!(10 mM ea) !!(2.5 U/μL) !!
|-
!Experimental-forward
|27 μL ||5 μL ||5 μL ||10 μL ||0 μL ||2 μL ||1 μL ||50 μL
|-
!Experimental-reverse
|27 μL ||5 μL ||5 μL ||0 μL ||10 μL ||2 μL ||1 μL ||50 μL
|-
!(-) Control-forward
|28 μL ||5 μL ||5 μL ||10 μL ||0 μL ||2 μL ||0 μL ||50 μL
|-
!(-) Control-reverse
|28 μL ||5 μL ||5 μL ||0 μL ||10 μL ||2 μL ||0 μL ||50 μL
|}
:* Add each from left to right. Mix and spin before adding Pfu Turbo. Gentle mixing and spin after Pfu Turbo. Don't mix in wax.
:* dNTPs should be aliquoted to minimize freeze-thaw cycles and ensure the integrity of the triphosphate.
:# 30" @ 95°C
:# 30" @ 95°C
:# 1' @ 55°C
:# 1'/kb @ 68°C
:# remove from PCR machine, pipet off wax, and chill briefly to re-harden thin wax layer
:# go immediately to 2nd stage:
{|border="1"
|+
'''2nd stage'''
|-
!Tube !!1st stage-forward !!1st stage-reverse !!Pfu Turbo !!wax
|-
! !! !! !!(2.5 U/μL) !!
|-
!Experimental
|25 μL ||25 μL ||1 μL ||50 μL
|-
!(-) Control
|25 μL ||25 μL ||0 μL ||50 μL
|}
:* Mix DNA and Pfu by pipetting, then add wax.
:# 30" @ 95°C
:# 30" @ 95°C
:# 1' @ 55°C
:# 1'/kb @ 68°C
:# repeat steps 2-4 x 17 more times
:# 15' @ 68°C
:# 15' @ 68°C
:# hold @ 4°C
:# hold @ 4°C

Revision as of 09:04, 9 June 2011

Basic QuikChange protocol

Basic QuikChange protocol
Tube sterile H2O Pfu Buffer Template For primer Rev primer dNTPs Pfu Turbo wax
(10X) (10 μg/mL) (12.5 ng/μL) (12.5 ng/μL) (10 mM ea) (2.5 U/μL)
Experimental 17 μL 5 μL 5 μL 10 μL 10 μL 2 μL 1 μL 50 μL
(-) Control 18 μL 5 μL 5 μL 10 μL 10 μL 2 μL 0 μL 50 μL
  • Add each from left to right. Mix and spin before adding Pfu Turbo. Gentle mixing and spin after Pfu Turbo. Don't mix in wax.
  • dNTPs should be aliquoted to minimize freeze-thaw cycles and ensure the integrity of the triphosphate.
  1. 30" @ 95°C
  2. 30" @ 95°C
  3. 1' @ 55°C
  4. 1'/kb @ 68°C
  5. repeat steps 2-4 x 15 (for one base change) or 17 (for more than one base change) more times
  6. 15' @ 68°C
  7. hold @ 4°C

2-stage QuikChange protocol

This protocol is based on the report by Wang & Malcolm. (1999) Biotechniques 26:680-682. It is especially helpful for large inserts.

1st stage
Tube sterile H2O Pfu Buffer Template For primer Rev primer dNTPs Pfu Turbo wax
(10X) (10 μg/mL) (12.5 ng/μL) (12.5 ng/μL) (10 mM ea) (2.5 U/μL)
Experimental-forward 27 μL 5 μL 5 μL 10 μL 0 μL 2 μL 1 μL 50 μL
Experimental-reverse 27 μL 5 μL 5 μL 0 μL 10 μL 2 μL 1 μL 50 μL
(-) Control-forward 28 μL 5 μL 5 μL 10 μL 0 μL 2 μL 0 μL 50 μL
(-) Control-reverse 28 μL 5 μL 5 μL 0 μL 10 μL 2 μL 0 μL 50 μL
  • Add each from left to right. Mix and spin before adding Pfu Turbo. Gentle mixing and spin after Pfu Turbo. Don't mix in wax.
  • dNTPs should be aliquoted to minimize freeze-thaw cycles and ensure the integrity of the triphosphate.
  1. 30" @ 95°C
  2. 30" @ 95°C
  3. 1' @ 55°C
  4. 1'/kb @ 68°C
  5. remove from PCR machine, pipet off wax, and chill briefly to re-harden thin wax layer
  6. go immediately to 2nd stage:
2nd stage
Tube 1st stage-forward 1st stage-reverse Pfu Turbo wax
(2.5 U/μL)
Experimental 25 μL 25 μL 1 μL 50 μL
(-) Control 25 μL 25 μL 0 μL 50 μL
  • Mix DNA and Pfu by pipetting, then add wax.
  1. 30" @ 95°C
  2. 30" @ 95°C
  3. 1' @ 55°C
  4. 1'/kb @ 68°C
  5. repeat steps 2-4 x 17 more times
  6. 15' @ 68°C
  7. hold @ 4°C
Retrieved from "https://openwetware.org/mediawiki/index.php?title=Muratore:Protocols/PCR/Quikchange&oldid=515170"