Prince:Mass Spectrometry

From OpenWetWare

(Difference between revisions)
Jump to: navigation, search
m (Equipment: added page for spray tips and other MS consumables)
Line 16: Line 16:
* [[Prince:Tech Support|Tech Support]]
* [[Prince:Tech Support|Tech Support]]
* [[Prince:MS Prep Consumables|MS Prep Consumables]]
* [[Prince:MS Prep Consumables|MS Prep Consumables]]
* [[Prince::MS Consumables|MS Consumables]]
* [[Prince:Miscellaneous Tips|Miscellaneous Tips]]
* [[Prince:Miscellaneous Tips|Miscellaneous Tips]]

Revision as of 13:47, 5 January 2011

Image:Prince lab logo.png

Home        Lab Members         Research         Publications         Internal         Mass Spec         Contact        


New Users

We recommend you peruse this site and become more familiar with the content. Additionally, you may visit this site specifically, where we have compiled information pertinent into an introduction for you.

Introduction to Mass Spectrometry

Sample Preparation

Proven Methods:

Side Notes:



[From the wall out]

  • Helium UHP [LTQ] (40psi)
  • Nitrogen UHP [HCD] (100psi)
  • Nitrogen 99% (this is the normal nitrogen in the stock room) [sheath & Orbitrap bath] (100psi)
  • Nitrogen? Normal? psi? [for UPLC]


  • Troubleshooting the Eksigent UPLC system
  • UPLC (Fittings/tubing/flow rates)
    • 10 micron needles provide best nano-spray at 200-300 nl/min


Mascot Restart

 user@jp1:~$ ls /etc/init.d/mascot
user@jp1:~$ sudo /etc/init.d/mascot status
[sudo] password for user:
user@jp1:~$ sudo /etc/init.d/mascot restart
 * Mascot monitor is not running
 * Mascot monitor started
Personal tools