Prince:Mass Spectrometry

From OpenWetWare

(Difference between revisions)
Jump to: navigation, search
(UPLC)
Current revision (19:01, 1 February 2013) (view source)
 
(7 intermediate revisions not shown.)
Line 10: Line 10:
* [[Prince:FASP|FASP]] (filter aided sample preparation)
* [[Prince:FASP|FASP]] (filter aided sample preparation)
* [[Prince:In Gel FASP|In Gel FASP]]
* [[Prince:In Gel FASP|In Gel FASP]]
 +
* [[Prince:Yeast FASP|Yeast FASP]]
'''Side Notes:'''
'''Side Notes:'''
* [[Prince:Reduction & Alkylation|Reduction & Alkylation]]
* [[Prince:Reduction & Alkylation|Reduction & Alkylation]]
* [[Prince:Microwave Digestion|Microwave Digestion]]
* [[Prince:Microwave Digestion|Microwave Digestion]]
 +
====Wet Lab Rules====
 +
* [[Prince:Prince Lab Practices| Lab Practices]]
 +
===Equipment===
===Equipment===
* [[Prince:Tech Support|Tech Support]]
* [[Prince:Tech Support|Tech Support]]
Line 44: Line 48:
  * Mascot monitor started
  * Mascot monitor started
user@jp1:~$</pre>
user@jp1:~$</pre>
 +
 +
You may also try this.
 +
 +
If the mascot daemon is not running:
 +
 +
[You need to have sudo priviledges on jp1]
 +
 +
In the command line enter;
 +
 +
'''sudo /mascot/bin/ms-monitor.exe'''
 +
 +
 +
From home, this could be done, after vpn-ing into the chemistry network with a single ssh command:
 +
 +
'''ssh -t <USERNAME>@jp1.chem.byu.edu 'sudo /mascot/bin/ms-monitor.exe''''
 +
 +
=Scheduling=
 +
You may access the scheduling site here:
 +
 +
[http://mass-spec-scheduler.heroku.com/ Orbitrap Scheduling]

Current revision

Image:Prince lab logo.png

Home        Lab Members         Research         Publications         Internal         Mass Spec         Contact        


Contents

New Users

We recommend you peruse this site and become more familiar with the content. Additionally, you may visit this site specifically, where we have compiled information pertinent into an introduction for you.

Introduction to Mass Spectrometry

Sample Preparation

Proven Methods:

Side Notes:

Wet Lab Rules

Equipment

Gases

[From the wall out]

  • Helium UHP [LTQ] (40psi)
  • Nitrogen UHP [HCD] (100psi)
  • Nitrogen 99% (this is the normal nitrogen in the stock room) [sheath & Orbitrap bath] (100psi)
  • Nitrogen Normal (100psi) [for UPLC]

UPLC

Tuning/Calibration

Mascot Restart

 user@jp1:~$ ls /etc/init.d/mascot
/etc/init.d/mascot
user@jp1:~$ sudo /etc/init.d/mascot status
[sudo] password for user:
user@jp1:~$ sudo /etc/init.d/mascot restart
 * Mascot monitor is not running
 * Mascot monitor started
user@jp1:~$

You may also try this.

If the mascot daemon is not running:

[You need to have sudo priviledges on jp1]

In the command line enter;

sudo /mascot/bin/ms-monitor.exe


From home, this could be done, after vpn-ing into the chemistry network with a single ssh command:

ssh -t <USERNAME>@jp1.chem.byu.edu 'sudo /mascot/bin/ms-monitor.exe'

Scheduling

You may access the scheduling site here:

Orbitrap Scheduling

Personal tools