Prince:Mass Spectrometry

From OpenWetWare

(Difference between revisions)
Jump to: navigation, search
(Sample Preparation)
Current revision (19:01, 1 February 2013) (view source)
 
Line 48: Line 48:
  * Mascot monitor started
  * Mascot monitor started
user@jp1:~$</pre>
user@jp1:~$</pre>
 +
 +
You may also try this.
 +
 +
If the mascot daemon is not running:
 +
 +
[You need to have sudo priviledges on jp1]
 +
 +
In the command line enter;
 +
 +
'''sudo /mascot/bin/ms-monitor.exe'''
 +
 +
 +
From home, this could be done, after vpn-ing into the chemistry network with a single ssh command:
 +
 +
'''ssh -t <USERNAME>@jp1.chem.byu.edu 'sudo /mascot/bin/ms-monitor.exe''''
=Scheduling=
=Scheduling=

Current revision

Image:Prince lab logo.png

Home        Lab Members         Research         Publications         Internal         Mass Spec         Contact        


Contents

New Users

We recommend you peruse this site and become more familiar with the content. Additionally, you may visit this site specifically, where we have compiled information pertinent into an introduction for you.

Introduction to Mass Spectrometry

Sample Preparation

Proven Methods:

Side Notes:

Wet Lab Rules

Equipment

Gases

[From the wall out]

  • Helium UHP [LTQ] (40psi)
  • Nitrogen UHP [HCD] (100psi)
  • Nitrogen 99% (this is the normal nitrogen in the stock room) [sheath & Orbitrap bath] (100psi)
  • Nitrogen Normal (100psi) [for UPLC]

UPLC

Tuning/Calibration

Mascot Restart

 user@jp1:~$ ls /etc/init.d/mascot
/etc/init.d/mascot
user@jp1:~$ sudo /etc/init.d/mascot status
[sudo] password for user:
user@jp1:~$ sudo /etc/init.d/mascot restart
 * Mascot monitor is not running
 * Mascot monitor started
user@jp1:~$

You may also try this.

If the mascot daemon is not running:

[You need to have sudo priviledges on jp1]

In the command line enter;

sudo /mascot/bin/ms-monitor.exe


From home, this could be done, after vpn-ing into the chemistry network with a single ssh command:

ssh -t <USERNAME>@jp1.chem.byu.edu 'sudo /mascot/bin/ms-monitor.exe'

Scheduling

You may access the scheduling site here:

Orbitrap Scheduling

Personal tools