Quantification of glucose

Method

SET-UP

1. Rinse out Buffer container and fill to line with YSI 2357 Buffer solution
2. Hit [Menu} then {2-MeasParameter] then [2-CalMethod] then [1-One Station]
3. Hit [Enter] twice to return to Measurement Parameter Set up Screen
4. Hit [3-Black]
5. Make sure Current BLACK probe chem is set to NONE. If it isn't, hit [1-Next chemistry] until NONE appears and hit [ENTER] to save
6. Hit [4-White] and set Current WHITE probe chem to Dextrose
7. Hit [Enter] 4 times to return to Measurement Parameter Set up Screen
8. Hit [Menu] to return to home screen

RUN SAMPLES

1. Hit [Run] and wait for system to complete calibration
2. When Ready screen appears, hit [Sample]
3. Present sample to needle in Station S3 without touching needle to tube
4. Hit [Sample] and wait for needle to retract

• Results will print out at the completion of run
• To continue testing samples, hit [Sample] when Ready screen appears

• • Note: After 5-7 runs, system will automatically calibrate.