Richard Lab:ASE overview: Difference between revisions
From OpenWetWare
Jump to navigationJump to search
No edit summary |
No edit summary |
||
Line 1: | Line 1: | ||
==Overview== | ==Overview== | ||
*Automated extraction of solid samples with common solvents at elevated temperature and pressure (Fig. 1) | |||
*Extraction steps: preheating sample cell (optional), filling cell with solvent, heating (equilibration), static extraction, rinsing, purging solvent and extractives into collection vessel, and relief | |||
*Current applications | |||
**Water and 95% ethanol extractions for NREL biomass compositional analysis | |||
**Liquid hot water biomass pretreatment | |||
==Materials== | ==Materials== |
Revision as of 14:16, 3 February 2010
Overview
- Automated extraction of solid samples with common solvents at elevated temperature and pressure (Fig. 1)
- Extraction steps: preheating sample cell (optional), filling cell with solvent, heating (equilibration), static extraction, rinsing, purging solvent and extractives into collection vessel, and relief
- Current applications
- Water and 95% ethanol extractions for NREL biomass compositional analysis
- Liquid hot water biomass pretreatment
Materials
List reagents, supplies and equipment necessary to perform the protocol here. For those materials which have their own OWW pages, link to that page. Alternatively, links to the suppliers' page on that material are also appropriate.
- supply 1 (i.e. tubes of a certain size? spreaders?)
- reagent 1
- X μL reagent 2
- component A (reagent 2 is made up of multiple components)
- component B
- equipment 1
- equipment 2
Procedure
- Step 1
- Step 2
- Step 2 has some additional information that goes with it. i.e. Keep at 4°C.
- Step 3
- Step 3 has multiple sub-steps within it.
- Enumerate each of those.
Notes
References
Contact
- Who has experience with this protocol?
Back to Protocols