SBB10Ntbk-XiaoY.Liu: Difference between revisions

From OpenWetWare
Jump to navigationJump to search
No edit summary
Line 50: Line 50:
====Amplification====
====Amplification====
Now, you need to do an amplification of the correct full-length chunks.  Clean up the assembly reaction with a zymo column; don't bother running it on a gel - it'll be a smeary mess and won't really help you.   
Now, you need to do an amplification of the correct full-length chunks.  Clean up the assembly reaction with a zymo column; don't bother running it on a gel - it'll be a smeary mess and won't really help you.   
=====Regular Zymo Cleanup=====
====Regular Zymo Cleanup====
The following procedure removes the polymerase, dNTPs, buffer, and most of the oligonucleotides from a PCR reaction.  It also will remove the buffer and restriction enzymes from a restriction digest reaction.
The following procedure removes the polymerase, dNTPs, buffer, and most of the oligonucleotides from a PCR reaction.  It also will remove the buffer and restriction enzymes from a restriction digest reaction.


Revision as of 14:08, 10 March 2010

JCAnderson 18:59, 9 March 2010 (EST)

JCA reran the PCA using phusion instead of expand in step 1, came out much better (gel at right). Took through to digestion and cleanup, ready to ligate.

Xiao Y. Liu 16:16, 8 March 2010 (EST)

Xiao's gel on March 8th

Lane: 1. sbb03 2. PiggyBac 3. Ladder

PiggyBac

  1. after PCR 2, analytical gel (3ul PCR prodcut + 7ul loading buffer), look for 1813bp band
  2. Gel showed little SOEing products, so redo SOEing with 2k 45°C program.

SOEing

Set up the following reaction in a PCR tube: 

24uL ddH2O
3.3uL 10x Expand Buffer "2"
3.3uL dNTPs (2mM in each)
1uL Oligo 1 = PiggyBac 01, 10uM
1uL Oligo 2 == PiggyBac 04, 10uM
0.5uL Expand polymerase "1"
0.5uL Template DNA from A+B+C stock solution

Sbb03

  • after Amplification, run a analytical gel (3ul PCR prodcut + 7ul loading buffer),look for 550bp band
  • failed, so give all products to prof.

Xiao Y. Liu 16:12, 3 March 2010 (EST)

PiggyBac

  • proceed SOEing PCR after zymo gel purifications for all 3 parts(A, B, C)
  1. Elute the DNA products from all 3 gel purification reactions in 50uL of water, since i eluted each one with 8.5 ul, after combining everything, add 50-3*8.5 = 24.5 ul dd water.
  2. Set up your second round of PCR as a normal 33uL reaction using the eluted mixture of fragments as template

Set up the following reaction in a PCR tube: 

24uL ddH2O
3.3uL 10x Expand Buffer "2"
3.3uL dNTPs (2mM in each)
1uL Oligo 1 = PiggyBac 01, 10uM
1uL Oligo 2 == PiggyBac 04, 10uM
0.5uL Expand polymerase "1"
0.5uL Template DNA from A+B+C stock solution

sbb03

  • after re-assembly, proceed to second round of amplification.

Amplification

Now, you need to do an amplification of the correct full-length chunks. Clean up the assembly reaction with a zymo column; don't bother running it on a gel - it'll be a smeary mess and won't really help you.

Regular Zymo Cleanup

The following procedure removes the polymerase, dNTPs, buffer, and most of the oligonucleotides from a PCR reaction. It also will remove the buffer and restriction enzymes from a restriction digest reaction.


  1. Add 180 uL of Zymo ADB buffer (brown bottle) to a 33uL or 50uL reaction.
  2. Transfer into the Zymo column (small clear guys)
  3. spin through, discard waste.
  4. Add 200 uL of PE or Zymo Wash buffer (which is basically 70% ethanol)
  5. spin through, discard waste.
  6. Add 200 uL of PE or Zymo Wash buffer
  7. spin through, discard waste.
  8. spin for 90 seconds, full speed to dry.
  9. elute with water into a fresh Eppendorf tube, use the same volume of water as the volume of the original reaction (50ul in this case)

Save the purified product in case this step fails! For the amplification reaction, do a normal phusion program with 1 ul of the cleaned up assembly reaction as template, and using the outermost oligos for the chunk. That is:
Recipe

  1. 1 ul each outer oligo (10 uM)
  2. .5 ul phusion
  3. 10 ul 5x phusion buffer
  4. 5 ul 2mM dNTPs
  5. 32.5 ul H2O

Program

  1. 2 min initial denature at 94oC
  2. 30 sec denature at 94oC
  3. 30 sec anneal at 60oC [This should be high, as your outer oligos now have a huge overlap with the correct product]
  4. 30 sec extension at 68oC
  5. repeat 2-4 30 times total

Xiao Y. Liu 16:25, 1 March 2010 (EST)

PiggyBac

  • Products from secomd PCR for piggyBac A, do a preparative gel with 6ul PCR products and 4ul loading buffer(blue, dye).
  • prep gel showed success, so do a zymo gel purification for piggyBac A, eluted with 8.5ul water at the end. save stock and eluted DNA

sbb03

  • Clean up the amplification reactions with a zymo column

Regular Zymo Cleanup

The following procedure removes the polymerase, dNTPs, buffer, and most of the oligonucleotides from a PCR reaction. It also will remove the buffer and restriction enzymes from a restriction digest reaction.


  1. Add 180 uL of Zymo ADB buffer (brown bottle) to a 33uL or 50uL reaction.
  2. Transfer into the Zymo column (small clear guys)
  3. spin through, discard waste.
  4. Add 200 uL of PE or Zymo Wash buffer (which is basically 70% ethanol)
  5. spin through, discard waste.
  6. Add 200 uL of PE or Zymo Wash buffer
  7. spin through, discard waste.
  8. spin for 90 seconds, full speed to dry.
  9. elute with water into a fresh Eppendorf tube, use the same volume of water as the volume of the original reaction (50ul)
  • mistake: forgot to do a analytic gel, so use 6ul of eluted product with 4ul loading buffer to run a analytical gel.
  • gel showed nothing, so do a re-assembly with 1 ul PCR product.

Xiao Y. Liu 16:21, 24 February 2010 (EST)

PiggyBac

Second PCR trial for PiggyBac A

  • PCR for piggyBac A failed, so do a second PCR with oligos(ca1530 and piggyBac02) and with program 55.

make dilution(10uM) puggyBac01 from stock(100uM) with 9ul water and 1ul stock

set up PCR tube:

  • lable tubes sbb04 A Xiao Liu 2/23/10
     24uL ddH2O
     3.3uL 10x Expand Buffer "2" 
     3.3uL dNTPs (2mM in each)
      1uL Oligo 1, 10uM
      1uL Oligo 2, 10uM
      0.5uL Template DNA
      0.5uL Expand polymerase "1"
  • place them in 55 PCR program.

PiggyBac B and PiggyBac C

  • after preparative gel, zymo purification.
Zymo Gel Purification
  • All spins until the drying step are 15 second full speed spins.
  1. transfer into the Zymo column inside a collection tube (small clear guys)
  2. spin through, discard waste.
  3. Add 200 uL of PE buffer (which is basically 70% ethanol)
  4. spin through, discard waste.
  5. Add 200 uL of PE buffer
  6. spin through, discard waste.
  7. spin for 90 seconds, full speed to dry.
  8. elute with 8.5 uL of water into a fresh Eppendorf tube

Sbb03

Amplification reaction with a normal phusion program
  • contiune sbb03 experiment. PCR with tos-1 and tos-20
  • add following in order: (check order with Prof. )
32.5 ul H2O 
10 ul 5x phusion buffer
5 ul 2mM dNTPs
1 ul each outer oligo (10 uM)=tos-1 and tos-20
0.5 ul phusion
  • run Phusion Program, anneal at 60°C,

Xiao Y. Liu 19:07, 22 February 2010 (EST)

PiggyBac

  • Products from 3 PCR for piggyBac, do a preparative gel with sbb04A, sbb04B, and sbb04C with 6ul PCR products and 4ul loading buffer(blue, dye).
  • sbb04 stops at melting gel with ADP buffer.

Image from preparative gel

1. ladder 2. sbb04A 3. sbb04B 4. sbb04C 5. RH 33A 6. RH33B 7. blank 8. blank 9. CD1 10. CD2 11. CD3 12. sbb19A 13. sbb19B 14. ladder

sbb03 tos

  • After getting PCA products back for sbb03, do a zymo clean up.

Regular Zymo Cleanup

The following procedure removes the polymerase, dNTPs, buffer, and most of the oligonucleotides from a PCR reaction. It also will remove the buffer and restriction enzymes from a restriction digest reaction.


  1. Add 180 uL of Zymo ADB buffer (brown bottle) to a 33uL or 50uL reaction.
  2. Transfer into the Zymo column (small clear guys)
  3. spin through, discard waste.
  4. Add 200 uL of PE or Zymo Wash buffer (which is basically 70% ethanol)
  5. spin through, discard waste.
  6. Add 200 uL of PE or Zymo Wash buffer
  7. spin through, discard waste.
  8. spin for 90 seconds, full speed to dry.
  9. elute with water into a fresh Eppendorf tube, use the same volume of water as the volume of the original reaction (50ul)
  • sbb03 stops at the end of zymo clean up.

Xiao Y. Liu 03:37, 17 February 2010 (EST)

sbb03 tos

  1. set up PCA reaction for tos site. (50ul reaction)

Assembly reaction

  • add following materials in order. ~ 5 min
38 uL ddH2O
5 ul 10x expand buffer
5 ul 2mM dNTPs
1 ul oligo mixture (100uM total, mixture of oligos after combination of 100uM stocks)
0.75 ul Expand polymerase
  • run JCA/PCA1 program, (55°C for annealing) ~ 1.5 to 2 hours
  • stop here today.

PiggyBac

PCR of parts for SOEing

  1. set up 3 PCR reactions for piggyBac. (33ul rxn)
  • basic PCR method to amplify your DNA from a plasmid or genomic DNA sample using the Expand polymerase.

The oligo concentrations in my stocks should be 100uM. I use them at 10uM in this protocol. So, i first need to make an oligo dilution of: 

 9uL Water
 1uL 100uM oligo

can throw away the remainder of the diluted oligo when i'm done, but hold onto the stock tube!

Set up the master mix in a PCR tube: 

     24uL ddH2O * 3 = 72 uL ddH2O
     3.3uL 10x Expand Buffer "2" * 3 = 9.9uL 10x Expand Buffer "2"
     3.3uL dNTPs (2mM in each) * 3 = 9.9 uL dNTPs
     1.5uL Expand polymerase "1"
  • lable tubes, divide the master mix into 3. and proceed following to each PCR reaction.
      1uL Oligo 1, 10uM
      1uL Oligo 2, 10uM
      0.5uL Template DNA ( ask before this, Mike suggest to add this into master mix, but prof. said always add enzyme last, what should i do?)
  • give GSI the tubes and run program.

Xiao Y. Liu 12:51, 16 February 2010 (EST)

  • Planning for Experiment on Wed, Feb 17th, 2010

(sbb03) tos Site of N15 Flow Chart

  1. PCA with tos 1-tos 20, PCR with tos 1 and tos 20, 55°C.
  2. analytical gel to check length of products (550bp is the target sequence), cut out target band if find one.
  3. Zymo clean up
  4. digestion
  5. gel purify
  6. stop, check if enough time to proceed next step!!!

(sbb04) PiggyBac Transposase Flow Chart

  1. make master mix for 3 PCR reactions,
  2. PCR fragment A , B, and C
  3. analytic gel, check length
  4. Zymo clean up
  5. digestion, mapping?
  6. gel purify
  7. stop, check if enough time to proceed next step!!!

Xiao Y. Liu 18:30, 10 February 2010 (EST)

  • check clotho, found that sbb04 DNA is not there, commit it.
  • start tutorial 6
  • correct mistakes in protein fusion construction files and ApE.

Xiao Y. Liu 18:26, 8 February 2010 (EST)

  • modified construction file for both tos and piggyBac.
  • upload sbb03 and sbb04 to clotho
  • upload oligos to oligo log, and construction files.

Construction file for tos (modified)

1) sbb03:  tos site of N15

Pool tos01 through tos20, assemble by PCA
PCR tos01/tos20 on PCA reaction	(550bp,EcoR1/BamH1, gp)
Sub into pBca9145-jtk2625    (EcoRI/BamHI, 2057+929bp, L)
Product is pBca9145-sbb03 {<tos>}

------------
tos01	PCA assembly of tos  CCATAGAATTCATGAGATCTTCTAAGCGCAACGGTATTACTTACGT	
tos02	PCA assembly of tos  ATTTAAAATCATTAAGTTAGGTTTTAAATATACCAACGTAAGTAATACCGTTGC	
tos03	PCA assembly of tos  TTAAAACCTAACTTAATGATTTTAAATGATAATAAATCATACCAATTGC	
tos04	PCA assembly of tos  CAGCATGTTCGCTTAACTTTTGATAGCAATTGGTATGATTTATTATC	
tos05	PCA assembly of tos  AAAGTTAAGCGAACATGCTGATTTTCACGCTGTTTATACACTTTGAG	
tos06	PCA assembly of tos  ATATAGAGACGGAAGAGATAGAGATGCCTCAAAGTGTATAAACAGCG	
tos07	PCA assembly of tos  TATCTCTTCCGTCTCTATATTGAAACACAATCAAAGAACATCAATCC	
tos08	PCA assembly of tos  TTCTTAGATAGTGGGGGATGTCACATGGATTGATGTTCTTTGATTG	
tos09	PCA assembly of tos  ATCCCCCACTATCTAAGAACACCATAACAGAACACAACATAGGAATG	
tos10	PCA assembly of tos  TGTTCCGAATTATTGATACATTAATGTTGCATTCCTATGTTGTGTTCTG	
tos11	PCA assembly of tos  AATGTATCAATAATTCGGAACATATGCACTATATCATATCTCAATTACGG	
tos12	PCA assembly of tos  ATGGGCAATTGTGTGCTGATATGTTCCGTAATTGAGATATGATATAG	
tos13	PCA assembly of tos  TCAGCACACAATTGCCCATTATACGCGCGTATAATGGACTATTGTGTG	
tos14	PCA assembly of tos  GTTCTGCGCTTATGTTCTCCTTATCAGCACACAATAGTCCATTATAC	
tos15	PCA assembly of tos  GAGAACATAAGCGCAGAACAATATGTATCTATTCCGGTGTTGTGTTC	
tos16	PCA assembly of tos  TATAAGAGAACATAATAGCAGAATAACAAAGGAACACAACACCGGAATAG	
tos17	PCA assembly of tos  TCTGCTATTATGTTCTCTTATAGTGTGACGAAAGCAGCATAATTAATC	
tos18	PCA assembly of tos  ATATCGTAACACAATCAAAGAACAAGTGACGATTAATTATGCTGCTTTCG	
tos19	PCA assembly of tos  TTCTTTGATTGTGTTACGATATCCAGAGACTTAGAAACGGGGGAAGG	
tos20	PCA assembly of tos  CATAGGGATCCTTCCCCCGTTTCTAAGT

Construction file for piggyBac transposase (modified)

Construction file for piggyBac transposase (sbb04)

PCR with piggyBac01/CA1530 on Bca1519 3-2          (335bp, gp=A)
PCR CA1527/piggyBac03 on Bca1519 3-1               (721bp, gp=B)
PCR with piggyBac02/piggyBac04 on Bca1553 4-6      (925bp, gp=C)
-----------------------------------------------------------------
PCR with piggyBac01 and piggyBac04 on A+B+C	(1813bp, EcoRI/BamHI)
Digest pBjk2741-Bca1144			(EcoRI/BamHI, 2170bp + 910bp,L)
Product is  pBjk2741-sbb04   {<piggyBac!}
-----------------------------------------------------------------
piggyBac01 Forward PCR of part 1 of piggyBac 
ccatagaattcatgAGATCTGGTTGCTCTCTGGACGACGAAC
CA1527	TGGACGAACAGAACGTTATCGAACAGCCGGGTTCTTCTCTGGCTTCT
PCA assembly of piggiebacfiveprime (Bca1519)
CA1530	ACGACGGGTAGATTTAGAGGTAGACCAGCAGTGTTTGTTTTTACCAC
PCA assembly of piggiebacfiveprime (Bca1519)
piggyBac02 Forward SOEing part of piggyBac   
ACGGTATCAAAATCCTGATGatgtgcgactctggtaccaa
piggyBac03 Reverse SOEing part of piggyBac   
ttggtaccagagtcgcacatCATCAGGATTTTGATACCGT
piggyBac04 Reverse PCR of part 2 of piggyBac 
gctagGGATCCttaGAAGCAAGACTGGCACATG

Xiao Y. Liu 15:50, 8 February 2010 (EST)

PiggyBac

  • propose a construction file for sbb04, piggyBac transposase,
  • question about whether to leave a start codon in the beginning of sequence. since the falimy flavor is {<part!}, so i leave it out.
2) construction file for piggyBac transposase (sbb04)
PCR with piggyBac01 and piggyBac03 on pBca9523-Bca1519 (928bp, gp, A)
PCR with piggyBac02 and piggyBac04 on pBca9523-Bca1553 (925bp, gp, B)
-----------------------------------------------------------------
PCR with piggyBac01 and piggyBac04 on A+B	(1813bp, EcoR1/BamH1)
Digest pBjk2741-Bca1144			(EcoR1/BamH1, 2170bp + 910bp,L)
Product is  pBjk2741-sbb04  {<piggyBac!}
-----------------------------------------------------------------
piggyBac01 Forward PCR of part 1 of piggyBac ccatagaattcatgAGATCTGGTTGCTCTCTGGACGACGAAC
piggyBac02 Forward SOEing part of piggyBac   ACGGTATCAAAATCCTGATGatgtgcgactctggtaccaa
piggyBac03 Reverse SOEing part of piggyBac   ttggtaccagagtcgcacatCATCAGGATTTTGATACCGT
piggyBac04 Reverse PCR of part 2 of piggyBac gctagGGATCCttaGAAGCAAGACTGGCACATG
  • description of PCR product: ccata + EcoR1 + atg + bgl2 + part 1 (last 20bp + first 20bp as SOEing Part) and part 2 of piggyBac + stop codon + BamH1 + ctagc.

Xiao Y. Liu 20:00, 6 February 2010 (EST)

Sbb03 tos

oligo design for {<tos>} using geneDesign

  • 1 biolding block, length of building block is 550 bp,
  • average Tm of oligo overlaps in building block is 46°,
  • number of oligos in building block: 20,
  • average oligo length: 47bp, longest oligo: 54bp, shorest oligo: 28bp.
  • PCA product is 5 random + EcoR1 + atg + bgl2 + target sequence + BamH1 + 5 random

Construction file for tos (check for errors)

1) sbb03:  tos site of N15

Pool tos01 through tos20, assemble by PCA
PCR tos01/tos20 on PCA reaction	(550bp,EcoR1/BamH1, gp)
Sub into pBca9145-jtk2625    (EcoRI/BamHI, 2057+929bp, L)
Product is pBca9145-sbb03

------------
tos01	PCA assembly of tos  CCATAGAATTCATGAGATCTTCTAAGCGCAACGGTATTACTTACGT	
tos02	PCA assembly of tos  ATTTAAAATCATTAAGTTAGGTTTTAAATATACCAACGTAAGTAATACCGTTGC	
tos03	PCA assembly of tos  TTAAAACCTAACTTAATGATTTTAAATGATAATAAATCATACCAATTGC	
tos04	PCA assembly of tos  CAGCATGTTCGCTTAACTTTTGATAGCAATTGGTATGATTTATTATC	
tos05	PCA assembly of tos  AAAGTTAAGCGAACATGCTGATTTTCACGCTGTTTATACACTTTGAG	
tos06	PCA assembly of tos  ATATAGAGACGGAAGAGATAGAGATGCCTCAAAGTGTATAAACAGCG	
tos07	PCA assembly of tos  TATCTCTTCCGTCTCTATATTGAAACACAATCAAAGAACATCAATCC	
tos08	PCA assembly of tos  TTCTTAGATAGTGGGGGATGTCACATGGATTGATGTTCTTTGATTG	
tos09	PCA assembly of tos  ATCCCCCACTATCTAAGAACACCATAACAGAACACAACATAGGAATG	
tos10	PCA assembly of tos  TGTTCCGAATTATTGATACATTAATGTTGCATTCCTATGTTGTGTTCTG	
tos11	PCA assembly of tos  AATGTATCAATAATTCGGAACATATGCACTATATCATATCTCAATTACGG	
tos12	PCA assembly of tos  ATGGGCAATTGTGTGCTGATATGTTCCGTAATTGAGATATGATATAG	
tos13	PCA assembly of tos  TCAGCACACAATTGCCCATTATACGCGCGTATAATGGACTATTGTGTG	
tos14	PCA assembly of tos  GTTCTGCGCTTATGTTCTCCTTATCAGCACACAATAGTCCATTATAC	
tos15	PCA assembly of tos  GAGAACATAAGCGCAGAACAATATGTATCTATTCCGGTGTTGTGTTC	
tos16	PCA assembly of tos  TATAAGAGAACATAATAGCAGAATAACAAAGGAACACAACACCGGAATAG	
tos17	PCA assembly of tos  TCTGCTATTATGTTCTCTTATAGTGTGACGAAAGCAGCATAATTAATC	
tos18	PCA assembly of tos  ATATCGTAACACAATCAAAGAACAAGTGACGATTAATTATGCTGCTTTCG	
tos19	PCA assembly of tos  TTCTTTGATTGTGTTACGATATCCAGAGACTTAGAAACGGGGGAAGG	
tos20	PCA assembly of tos  CATAGGGATCCTTCCCCCGTTTCTAAGT
Retrieved from "https://openwetware.org/mediawiki/index.php?title=SBB10Ntbk-XiaoY.Liu&oldid=398296"