Tk:pp-modification
From OpenWetWare
- Borcherding 2003 Affinity membranes as a tool for life science applications, Ann N Y Acad Sci 984:470-9 PMID 12783838
- 100 mM BP in methanol, 18 hours
- 8.2 mg/ml GMA + 70 μM BP + 1 mM sodium periodate in 10% methanol
- 5 minute UV exposure (> 300 nm, 80 mw/cm2)
- 0.2 mg/ml streptavidin in 100 mM HEPES pH 7.0
- wash 100 mM HEPES pH 7.0 + 150 mM NaCl + 0.1% Tween-20, 1 hour with agitation
- final wash with 100 mM HEPES pH 7.0
- US patent 3322661 Yoshikawa67
- US patent 5427779 (example 1, 10) Elsner95
- The Philips TL20W/09N lamp used here is 20 w UVA (320-400 nm, peak 350 nm). Mehrvar02 measures around 1 mw/cm2 with six.
Blak-ray B-100A lamp, 6 mw/cm2 at 365 nm and 30 cm distance spec sheet
- Test of 5427779 example 10 scheme
- 10 μg/mL Benzophenone in PBS + 2M CaCl2 pH 7.3
- 0.4 μg/mL Psoralen-PEO-biotin
- UV exposure for 1 hour at (estimated) 1 mw/cm2, equivalent to 10 minutes of the Blak-ray lamp
- wash 3x with PBS + 2M NaCl + 0.1% NP-40
- bind streptavidin-HRP conjugate at 0.45 μg/mL + BSA, 1 hour
- wash 3x as above
- detect with Ultra-TMB substrate
- Pierce biotinylated HRP reconstitution
- Pierce 29139 5 mg
- 1.5 moles biotin/mole HRP
- Recommended reconstitution at 1 ml DI water, store at -20 in aliquots
- instead, reconstitute in 50% glycerol + .05% sodium azide to 5 ml (1 mg/ml) store at -20
- recommended dilutions for antibody detection are 100:1 to 1000:1 of a 1 mg/ml dilution
- Pierce Streptavidin, HRP conjugated (Pierce 21126) 1 mg
- binds 7 ug biotin/mg streptavidin
- 2 moles HRP/mole streptavidin
- Reconstitute in 1 ml of 50% glycerol + .05% sodium azide, store at -20
- recommended dilution 1-10 ug/ml for staining
- recommended dilution 0.1 ug/ml for elisa
- supersignal west pico, dura, femto substrates 1:100,000 to 1:500,000 of a 1 mg/ml solution
- Sigma S4762 Streptavidin 1 mg
- Reconstitute at 1 mg/ml with 50% glycerol + .05% sodium azide
- Ultra-TMB (Pierce 34028) use
- Mix neat with detected solution in microplate.
- Wait 15-30 minutes for color to develop
- Blue or bluegreen with absorption at 370 and 652 nm. Add equal amounts of 2 M sulfuric acid to stop and convert to a 450 nm yellow absorbing product.
- Pierce EZ-Link Psoralen-PEO3-Biotin (Pierce 29986)
- Dissolve in DMF or DMSO. Water sensitive. Light Sensitive. Store in light protected tubes.
- MW 688.79, 36.86A linker arm
- Pierce recommends dissolving at 20 mM (1.38 mg/100 ul) and mixing at 200 uMolar (1:100 dilution) with 20-100 ng/ul DNA in TE
- UV exposure (365 nm) for 10 min - 30 min with Philips TL 20W/09 lamp.
- Ref Zhang Y et al. 2001 NAR 17:143-151
- Ultra-TMB sensitivity test
- Dilute 1 ul Biotin-HRP into 100 ul TE, then serial dilute 10 ul into 90 ul TE over twelve wells
- Add 100 ul Ultra-TMB solution
- E-8 turned dark blue immediately
- E-9 turned dark blue after 2 minutes
- E-10 turned light blue after 5 minutes
- E-11 turned very pale blue after 5 minutes
- Adding 100 ul 2M sulfuric acid turned the color to yellow, with little density change
- 1 ul of 1 mg/ml is 1 ug, diluted E-11 is E-16 g
- MW of biotin-HRP is about 45 KD, so E-16 g is E-16/4.5E4 = 2.2E-21 g
- This is 2.2E-21 * 6.022E23 molecules = 1.3E3 molecules
- Benzophenone 10 mg/ml in methanol
- PBS + CaCl2 solution precipitated calcium phosphate.
- The example 10 patent is probably just wrong.
- Remake solution with 100 mM Tris-HCl, 2M CaCl2