TorontoMicrofluidicsFoundry

Access to this laboratory requires users to be trained according to the UofT health and Safety regulations and individually trained at the equipment. Users that don't fulfill these requirements are not allowed access to the facility.

Lab Users

Dr. Axel Guenther, e-mail: axel.guenther@utoronto.ca, (416) 978-1282

Devon Huber, e-mail: devon.huber@utoronto.ca, (416) 946-8210

Yali Gao, e-mail: ylgao@mie.utoronto.ca, (647) 233-1207

Ali Jafari, e-mail: ajafari@mie.utoronto.ca, (416) 946-8210

Edmond Young, e-mail: edmyoung@mie.utoronto.ca, (416) 978-8660

Maged Metias, e-mail: maged.metias@utoronto.ca, (416) 978-8660

Christopher Moraes, e-mail: chris.moraes@utoronto.ca, (416) 978-8660 (Simmons group), (416) 978-8663 (Sun group)

Eric Wu, e-mail: e.wu@utoronto.ca, (647) 895-1275

Xinyu Liu, e-mail: xyliu@mie.utoronto.ca, (416) 978-8663

Supplies

Needed

Enter items running low here

1/ duct tape

2/ NITROGEN GAS --> IMPORTANT NOTE: There are currently 4 tanks in the fabrication room, two of which are not in use, but the problem is there are NO LABELS to suggest if those tanks are full or empty. It would be best to ensure that tanks are labeled, and empty tanks removed and taken to empty storage immediately to avoid confusion.

Ordered

Enter ordered items here

Received

Enter received supplies here

Equipment Log

Date, machine name, description of the problem.

Lab Usage time

For ALL fabrication done in the lab, enter your name, date, start end end times of usage and a brief description of your fabrication steps.

2/ Edmond Young, Simmons Lab, Fri Feb 23 2007, 1:30-3:30 PM Fab: SU-8-25 spincoat with Program #22, soft-bake, UV exposure for 9 sec. post-bake, develop

1/ Joint cleaning, Thu Feb 22, 4:00-5:30 PM

Booking

If you plan to use the lab in the future, please submit your times in advance to prevent double bookings. Note that for all times outside the normal working hours (workdays 9AM-5PM), you are only allowed to fabricate if you bring a second trained person with you.