Tris: Difference between revisions
From OpenWetWare
Jump to navigationJump to search
(added tags) |
(figure: tris chemical structure) |
||
Line 1: | Line 1: | ||
[[Image:160px-Tris.png|thumb|Chemical structure of Tris - 2-Amino-2-hydroxymethyl-propane-1,3-diol]] | |||
[http://en.wikipedia.org/wiki/Tris Tris] is a common buffering agent and is short for tris[hydroxymethyl]aminomethane (C<sub>4</sub>H<sub>11</sub>NO<sub>3</sub>). | [http://en.wikipedia.org/wiki/Tris Tris] is a common buffering agent and is short for tris[hydroxymethyl]aminomethane (C<sub>4</sub>H<sub>11</sub>NO<sub>3</sub>). | ||
Revision as of 09:49, 14 October 2008
Tris is a common buffering agent and is short for tris[hydroxymethyl]aminomethane (C4H11NO3).
- The formula weight is 121.14
- The pKa of Tris is 8.3
- dpKa/dT is -.028
- A buffer at pH 6.8 at 25°C will have a pH of 6.46 at 37°C
- Note that adding HCl during titration will affect the temperature of the solution
- Dilution by a factor of 10 will reduce the pH by 0.1 pH units.
Preparing a 1M Tris, pH 7.4 solution, from biologicalworld
- Weigh 121.1 g Tris in 700 ml double distilled water
- Do not start with too much water; otherwise, the volume after pHing may be too great
- Start stirring, and then check the pH
- With a 3M HCl solution, start to pH the solution such that the pH reaches 7.4
(Be careful not to inhale the HCl.)
- Add with double distilled water up to 1L
- Filter or autoclave if necessary
- May be better to store at 4 degrees C
- Dilute to appropriate concentration for use in biochemistry or molecular biology experiments. 20 mM or 50 mM Tris, pH 7.4 solutions are common. and