User:Alexander Cvitan/Notebook/Experimental Biological Chemistry Lab/2014/03/18: Difference between revisions

From OpenWetWare
Jump to navigationJump to search
No edit summary
(3 intermediate revisions by the same user not shown)
Line 13: Line 13:
==Images==
==Images==
'''Conductivity Readings of 30:1 Lysozyme-AuNP Samples with Variables Added After Baking'''
'''Conductivity Readings of 30:1 Lysozyme-AuNP Samples with Variables Added After Baking'''
 
*Note that water had to be added to the solutions to bring the volume up to 11ml. This was done because the sensor could take a measurement if we had a volume less than 12.
[[Image:cond3.18.png|900px|]]
[[Image:cond3.18.png|900px|]]


Line 24: Line 24:
[[Image:Screen_Shot_2014-03-18_at_3.01.57_PM.png]]
[[Image:Screen_Shot_2014-03-18_at_3.01.57_PM.png]]
[[Image:Screen_Shot_2014-03-19_at_3.14.08_PM.png]]
[[Image:Screen_Shot_2014-03-19_at_3.14.08_PM.png]]
*Note that dilution of the control was not necessary. We realized afterwards that the control used to make this graph was not diluted like the variable samples, as a result, the actual absorbance at the peak is closer to were the peak with variable is. The table represented above reflects this dilution and made the calculations accordingly.
<!-- ##### DO NOT edit below this line unless you know what you are doing. ##### -->
<!-- ##### DO NOT edit below this line unless you know what you are doing. ##### -->
|}
|}


__NOTOC__
__NOTOC__

Revision as of 15:39, 17 April 2014

Biomaterials Design Lab: Spring 2014 <html><img src="/images/9/94/Report.png" border="0" /></html> Main project page
<html><img src="/images/c/c3/Resultset_previous.png" border="0" /></html>Previous entry<html>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</html>Next entry<html><img src="/images/5/5c/Resultset_next.png" border="0" /></html>

Objective

  • Run UV-Vis of all ratios of BSA-AuNP and 30:1 lysozyme-AuNP samples with 2,2 bipyridine.
  • Take conductivity of 60:1, 70:1, 80:1, 90:1, and 100:1 BSA-AuNPs baked with MgCl2 measured at room temperature.
  • Calculate equilibrium constants for heated 30:1 lysozyme:AuNP (with variables added after baking) at 37°C, room temperature 30:1 lysozyme:AuNP (with variables added after baking), and cooled 30:1 lysozyme:AuNP (with variables added after baking) at 4°C.

Images

Conductivity Readings of 30:1 Lysozyme-AuNP Samples with Variables Added After Baking

  • Note that water had to be added to the solutions to bring the volume up to 11ml. This was done because the sensor could take a measurement if we had a volume less than 12.

UV-Vis Lyso 30:1

  • Note that dilution of the control was not necessary. We realized afterwards that the control used to make this graph was not diluted like the variable samples, as a result, the actual absorbance at the peak is closer to were the peak with variable is. The table represented above reflects this dilution and made the calculations accordingly.


Retrieved from "https://openwetware.org/mediawiki/index.php?title=User:Alexander_Cvitan/Notebook/Experimental_Biological_Chemistry_Lab/2014/03/18&oldid=789210"