User:Alexander Cvitan/Notebook/Experimental Biological Chemistry Lab/2014/04/01: Difference between revisions

From OpenWetWare
Jump to navigationJump to search
Line 45: Line 45:


===Adding Sodium Citrate to 30:1 Lysozyme-AuNP Samples===
===Adding Sodium Citrate to 30:1 Lysozyme-AuNP Samples===
# 2.841 g of sodium citrate was added to a 15 ml falcon tube and was filled with deionized water to 10 mL mark.  
* 2.841 g of sodium citrate was added to a 15 ml falcon tube and was filled with deionized water to 10 mL mark.  
# Dilutions for 1 mM, 10 mM, and 100 mM solutions were prepped.
* Dilutions for 1 mM, 10 mM, and 100 mM solutions were prepped.
# 1 mL aliquots were taken from 30:1 lysozyme-AuNP samples and were added 0.5 mL of each concentration of sodium citrate.
* 1 mL aliquots were taken from 30:1 lysozyme-AuNP samples and were added 0.5 mL of each concentration of sodium citrate.


==Figures==
==Figures==

Revision as of 20:46, 5 April 2014

Biomaterials Design Lab: Spring 2014 <html><img src="/images/9/94/Report.png" border="0" /></html> Main project page
<html><img src="/images/c/c3/Resultset_previous.png" border="0" /></html>Previous entry<html>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</html>Next entry<html><img src="/images/5/5c/Resultset_next.png" border="0" /></html>

Objective

  • We plan to run AA and UV-Vis on 30:1 lysozyme linked gold nanoparticle samples from 3/25/14 (Only the 4 Degree Celsius samples were run).
  • We also plan to run conductivity measurements on room temperature 30:1 lysozyme linked gold nanoparticle samples from 3/25/14.

Procedure

Adding Variables to 30:1 Lysozyme-AuNP Synthesized 3/26/14

1. Add 2.25 mL of each variable to 4.5 mL of sample.

  • The variables used were:
  • 0.03 M MgCl2, CaCl2, NaCl, KCl, MES, citric acid (0.0002316 M 2,2 bipyridine)
  • 0.06 M MgCl2, CaCl2, NaCl, KCl, MES, citric acid (0.0004544 M 2,2 bipyridine)
  • 0.09 M MgCl2, CaCl2, NaCl, KCl, MES, citric acid (0.0006772 M 2,2 bipyridine)

2. Put one of each sample in the following three environments: 4°C, 24°C, 36°C.

Conductivity Measurements of 30:1 Lysozyme-AuNP at Room Temperature

  • PLEASE NOE THAT THESE CONDUCTIVITY MEASUREMENTS ARE NOT CORRECTED FOR THE DILUTION FACTOR.

Atomic Absorption Preparation

Creating the Gold Stock Solutions

  1. Add 50 μL of HAuCl4·3H2O and 4950 μL of distilled water to a Falcon tube, for a final concentration of 10 μg/mL Au.
  2. Add 100 μL of HAuCl4·3H2O and 4900 μL of distilled water to a Falcon tube, for a final concentration of 20 μg/mL Au.
  3. Add 150 μL of HAuCl4·3H2O and 4850 μL of distilled water to a Falcon tube, for a final concentration of 30 μg/mL Au.
  4. Add 200 μL of HAuCl4·3H2O and 4800 μL of distilled water to a Falcon tube, for a final concentration of 40 μg/mL Au.
  5. Add 250 μL of HAuCl4·3H2O and 4750 μL of distilled water to a Falcon tube, for a final concentration of 50 μg/mL Au.


Atomic Absorption Samples

Solutions with the following Au:lysozyme ratio at room temperature were run on the AA:

  • 30:1 lysozyme-AuNP with 0.03 M MgCl2, CaCl2, NaCl, KCl, MES, citric acid (0.0002316 M 2,2 bipyridine)
  • 30:1 lysozyme-AuNP with 0.06 M MgCl2, CaCl2, NaCl, KCl, MES, citric acid (0.0004544 M 2,2 bipyridine)
  • 30:1 lysozyme-AuNP with 0.09 M MgCl2, CaCl2, NaCl, KCl, MES, citric acid (0.0006772 M 2,2 bipyridine)



Adding Sodium Citrate to 30:1 Lysozyme-AuNP Samples

  • 2.841 g of sodium citrate was added to a 15 ml falcon tube and was filled with deionized water to 10 mL mark.
  • Dilutions for 1 mM, 10 mM, and 100 mM solutions were prepped.
  • 1 mL aliquots were taken from 30:1 lysozyme-AuNP samples and were added 0.5 mL of each concentration of sodium citrate.

Figures

  • THIS DATA IS NO LONGER OF USE TO US. THIS IS BECAUSE THESE SAMPLES WERE PREPARED IN PLASTIC. THE RESULTS SEEN IN SAMPLE DON'T FOLLOW ANY OF THE TRENDS OBSERVED WHEN SAMPLES WERE MADE IN GLASS. WE DECIDED TO DISREGARD THESE RESULTS IN FAVOR OF LOOKING AT THE SAMPLES MADE IN GLASS.