User:Alicia Rasines Mazo/Notebook/CHEM-581 Experimental Chemistry I/2014/10/22: Difference between revisions
From OpenWetWare
No edit summary |
No edit summary |
||
Line 15: | Line 15: | ||
===Measuring absorbance of films in PBA=== | ===Measuring absorbance of films in PBA=== | ||
* Soaked PVA-Clay polymer films in 10 ppm PBA and measured absorbance twice ( from two scintillation vials) at each time slot. | * Soaked PVA-Clay polymer films in 10 ppm PBA and measured absorbance twice ( from two scintillation vials) at each time slot. | ||
** Note that the 10 ppm PBA solution was made by James and Eleni | ** Note that the 10.4 ppm PBA solution was made by James and Eleni | ||
***James measured out 10.4 mg of BPA and dissolved in 5 mL of methanol, then diluted to 1 L with distilled water. | ***James measured out 10.4 mg of BPA and dissolved in 5 mL of methanol, then diluted to 1 L with distilled water. | ||
** During UV-Vis measurements films were removed to avoid further absorption of chemicals. | ** During UV-Vis measurements films were removed to avoid further absorption of chemicals. |
Revision as of 07:21, 22 October 2014
Project name | <html><img src="/images/9/94/Report.png" border="0" /></html> Main project page <html><img src="/images/c/c3/Resultset_previous.png" border="0" /></html>Previous entry<html> </html>Next entry<html><img src="/images/5/5c/Resultset_next.png" border="0" /></html> |
Tasks for October 22
Completion of film synthesisPlaced film in sodium sulfate, 1% HCl and sodium bicarbonate. Measuring absorbance of films in PBA
|