User:Allison K. Alix/Notebook/CHEM-581/2013/02/11

From OpenWetWare

< User:Allison K. Alix | Notebook | CHEM-581 | 2013 | 02
Revision as of 14:28, 18 February 2013 by Allison K. Alix (Talk | contribs)
(diff) ←Older revision | Current revision (diff) | Newer revision→ (diff)
Jump to: navigation, search
Preparing Microgels Part II Main project page
Previous entry      Next entry


Objective

  • Prepare smaller hydrogels using a similar procedure to the one used on 2/06/13

Description

The nanogels prepared on 2/06/13 may be too small for our system. This being said, we are looking to devise another procedure using w/o emulsion that will make slightly larger hydrogels (~microscale)

Procedures

1) Add 0.5g of PVOH (MW = 89,000-98,000 g/mol) to 6mL phosphate buffer solution

2) Heat at 100°C for ~15 minutes

3) Pour into 50mL mineral oil and homogenize on the lower setting (rpm unknown- unlisted) for 1 min

4) Place in freezer at -20°C for 20 hours. Thaw for 4 hours. Repeat this cycle for a total of 3 cycles.

Observations

-Size of hydrogels is still unknown, but we are hoping that using more PVOH/phosphate buffer solution and less mineral oil as well as homogenization at a lower speed will allow for the formation of larger hydrogels.



Personal tools