User:Andrew K Farag/Notebook/CHEM-582/2015/01/30: Difference between revisions
From OpenWetWare
Line 35: | Line 35: | ||
==DSC Test== | ==DSC Test== | ||
#Weigh a pan and a lid | #Weigh a pan and a lid, 51.76 mg | ||
#add the mixture in the pan and press the lid on it | #add the mixture, 9.81 mg, in the pan and press the lid on it | ||
#Input into DSC to test for temperature starting at 20C to 200C, adding 5C/min | #Input into DSC to test for temperature starting at 20C to 200C, adding 5C/min | ||
##This test will let us know the optimum temperature for cross linking | ##This test will let us know the optimum temperature for cross linking |
Revision as of 13:35, 30 January 2015
Pipeline Surface Coating | <html><img src="/images/9/94/Report.png" border="0" /></html> Main project page <html><img src="/images/c/c3/Resultset_previous.png" border="0" /></html>Previous entry<html> </html>Next entry<html><img src="/images/5/5c/Resultset_next.png" border="0" /></html> |
Objectives
Materials
Measurementsthe proportion of Amine to Epoxy should be 1:1 in equivalent weights. The equivalent weight for the epoxy is 182-192 g/mol. The below image shows the equivalent weights of a few Jeffamines The image is from Hunstman's EPOXY FORMULATIONS USING JEFFAMINE® POLYETHERAMINES. Here is the link: http://www.huntsman.com/portal/page/portal/performance_products/Media%20Library/global/files/epoxy_formulations_using_jeffamine_polyetheramines.pdf Synthesis
DSC Test
|