User:Corbin A. Plugge/Notebook/Physics307L/2010/09/01: Difference between revisions
From OpenWetWare
| Line 7: | Line 7: | ||
<!-- ##### DO NOT edit above this line unless you know what you are doing. ##### --> | <!-- ##### DO NOT edit above this line unless you know what you are doing. ##### --> | ||
== Oscilloscope lab day 2== | == Oscilloscope lab day 2== | ||
Equipment: Tektronix TDS1002 Digital oscilloscope, bk precision 4017A 10MHz sweep/function generator | |||
Setup: function generator output was connected to the oscilloscope ch1 input via a BNC cable. | |||
Both devices were pluged into a 115V power strip. | |||
meashureing Fall time: with a square wave | |||
data: | |||
freq5.6Hz V1 11.6V V2 2.08V deltaT 40ms (measure function 58.56ms) time between 90% and 10% of the first falling edge of the waveform | |||
freq:11.2Hz V1 13.4V V2 3.6V deltaT 30ms (measure function 39.3ms) | |||
freq:56.75Hz V1 10.1V V2 7.1V deltaT 7.5ms (measure function about 3ms) | |||
freq:6cycles per77.2s 77.7mHz V1 9.76V V2 1.76V deltaT 40ms(measure function about 51.8ms) note:waiting for the trigger sucks | |||
Coupling: | |||
Revision as of 15:57, 1 September 2010
 Oscilloscope lab
|
<html><img src="/images/9/94/Report.png" border="0" /></html> Main project page <html><img src="/images/c/c3/Resultset_previous.png" border="0" /></html>Previous entry<html> </html> |
Oscilloscope lab day 2Equipment: Tektronix TDS1002 Digital oscilloscope, bk precision 4017A 10MHz sweep/function generator Setup: function generator output was connected to the oscilloscope ch1 input via a BNC cable. Both devices were pluged into a 115V power strip.
freq:56.75Hz V1 10.1V V2 7.1V deltaT 7.5ms (measure function about 3ms) freq:6cycles per77.2s 77.7mHz V1 9.76V V2 1.76V deltaT 40ms(measure function about 51.8ms) note:waiting for the trigger sucks Coupling:
| |
