User:Elaine Marie Robbins/Notebook/CHEM-496/2012/02/21

From OpenWetWare

< User:Elaine Marie Robbins | Notebook | CHEM-496 | 2012 | 02
Revision as of 13:19, 17 April 2012 by Elaine Marie Robbins (Talk | contribs)
(diff) ←Older revision | Current revision (diff) | Newer revision→ (diff)
Jump to: navigation, search
Effect of Tris Buffer on Protein Fibers II Main project page
Previous entry      Next entry

Objective

To take UV-vis data of tris + 50 mM tris buffer (pH 10.1) mixed on 02/15/12, and to synthesize protein fibers.

Description

Synthesizing AuNP

  1. Combine 1 mL of 3.66 mM HAuCl4 and 1.27 mL of 0.0173 mM BSA in a test tube.
  2. Dilute to 10 mL with water.
  3. Place in oven at 75°C.
  4. Leave solutions in oven for 3 hr.


Determining the effect of tris buffer on 166 Au/BSA ratio solution

  1. Take UV-vis data of 166 Au/BSA ratio solution synthesized on 01/31/12 and modified on 02/15/12.
  2. Centrifuge for 10 min at 13,200 rpm.
  3. Take UV-vis data of supernatant.

Data

  • Graph of absorbance vs wavelength for UV-vis data obtained before and after sample was centrifuged, compared with data obtained on 02/15/12.
Image:Absorbance vs wavelength 2-21-12.jpg

High absorbance values obtained from sample prior to centrifuging is most likely due to light scattering caused by solid protein fibers.


  • Magnified graph of absorbance vs wavelength not including data obtained before centrifuging sample.
Image:Absorbance vs wavelength magnified 2-21-12.jpg

Notes

The presence of a peak at 500-550 nm after centrifuging indicates that AuNP may be present in solution, even though the solution is a 166 Au/BSA ratio solution. Prior to the addition of the 50 mM tris solution (pH 10.1), all Au particles were associated with the protein fibers, and none were in solution.



Personal tools