User:Elizabeth Ghias/Notebook/Experimental Chemistry/2013/02/08 - Revision history

Elizabeth Ghias at 22:01, 8 February 2013

Elizabeth Ghias — Fri, 08 Feb 2013 22:01:05 GMT

←Older revision		Revision as of 22:01, 8 February 2013
Line 19:		Line 19:
	* Need to get first part of calculation from Klare.		* Need to get first part of calculation from Klare.

		+	10% Film and Stock solution - 0.214 g phenol in 10 mL

		+	1% Film: M1V1 = M2V2 → (21.4 M)(X) = (2.14)(0.01 L) → X = 0.001 L = 1 mL phenol stock solution in 9 mL water

		+	0.1% Film: (21.4 M)(X) = (0.214 M)(0.01 L) → X = 0.0001 L = 0.1 mL phenol stock solution in 9.9 mL water

-		+	0.01% Film: (21.4 M)(X) = (0.0214 M)(0.01 L) → X = 0.00001 L = 0.01 mL phenol stock solution in 9.99 mL water.

Elizabeth Ghias at 21:53, 8 February 2013

Elizabeth Ghias — Fri, 08 Feb 2013 21:53:12 GMT

←Older revision		Revision as of 21:53, 8 February 2013
Line 42:		Line 42:
	# Place on ice.		# Place on ice.
	# Add the product drop-wise		# Add the product drop-wise
-	# Filter and collect precipitate.	+	# Filter and collect precipitate. See notes.


Line 55:		Line 55:
	* Two 1% films were prepared to test the effects of preparing in an Erlenmeyer flask vs. a beaker. The film prepared in the flask did not have bubbles, so this is the method that will be used from now on. The film prepared in the beaker had bubbles and began to solidify before being poured.		* Two 1% films were prepared to test the effects of preparing in an Erlenmeyer flask vs. a beaker. The film prepared in the flask did not have bubbles, so this is the method that will be used from now on. The film prepared in the beaker had bubbles and began to solidify before being poured.
	* The 0.01% film was not prepared, because this concentration seems too low to be effective.		* The 0.01% film was not prepared, because this concentration seems too low to be effective.
-	*	+	* The quaternary ammonium salt did not crash out of solution when it was added dropwise to ethyl acetate. The reaction mixture was then added to petroleum ether, but still did not crash out of solution. This indicates that the reaction likely did not occur.
-		+	* Next time, we will try a new reaction with (S)-(-)-(3-Chloro-2-hydroxypropyl)trimethylammonium chloride.

Elizabeth Ghias at 21:44, 8 February 2013

Elizabeth Ghias — Fri, 08 Feb 2013 21:44:39 GMT

←Older revision		Revision as of 21:44, 8 February 2013
Line 16:		Line 16:

	<u>Phenol Film Calculations</u>		<u>Phenol Film Calculations</u>
		+
		+	* Need to get first part of calculation from Klare.


Line 26:		Line 28:

	# Prepare the 10% film by dissolving 0.214 g phenol and 1 g PVOH in 10 mL water.		# Prepare the 10% film by dissolving 0.214 g phenol and 1 g PVOH in 10 mL water.
-	# Allow to dissolve on the hot plate~~, then add~~ 1 mL glutaraldehyde~~, allow~~ to ~~stir for 2-3 minutes,~~ then ~~pour~~ into an evaporating ~~dish~~ and ~~allow~~ to ~~dissolve~~ over the weekend.	+	# Allow to dissolve on the hot plate.
-	# ~~Prepare a stock solution of~~ 0.~~214~~ g ~~phenol in 10~~ mL water.	+	# A phenol stock solution was prepared by dissolving 0.214 g phenol in 10 mL water.
-	# ~~Allow~~ to ~~dissolve~~.	+	# Two 1% films were prepared by dissolving 1 g PVOH in 9 mL water in either an Erlenmeyer flask or a beaker (see notes). 1 mL phenol stock solution and 1 mL glutaraldehyde were added to the gel. The films were then poured into evaporating dishes and allowed to evaporate over the weekend.
-		+	# A 0.1% film was prepared by dissolving 1 g PVOH and 9.9 mL water in an Erlenmeyer flask. 0.1 mL phenol stock solution and 1 mL glutaraldehyde were added to the gel. The film was then poured into evaporating dishes and allowed to evaporate over the weekend.
-		+	# A 7% film was prepared by dissolving 1 g PVOH and 50 mL water in an Erlenmeyer flask. 7 mL phenol stock solution and 1 mL glutaraldehyde were added to the film. The film was poured into an evaporating dish and allowed to evaporate over the weekend.


Line 51:		Line 53:

	* The 10% film solidified before glutaraldehyde could be added, so it was discarded. A 7% film with 50 mL water was made to test the effects of the higher concentration while ensuring that the film does not solidify.		* The 10% film solidified before glutaraldehyde could be added, so it was discarded. A 7% film with 50 mL water was made to test the effects of the higher concentration while ensuring that the film does not solidify.
-	* Two 1% films were prepared to test the effects of preparing in an Erlenmeyer flask vs. a beaker. The film prepared in the flask did not have bubbles, so this is the method that will be used from now on.	+	* Two 1% films were prepared to test the effects of preparing in an Erlenmeyer flask vs. a beaker. The film prepared in the flask did not have bubbles, so this is the method that will be used from now on. The film prepared in the beaker had bubbles and began to solidify before being poured.
	* The 0.01% film was not prepared, because this concentration seems too low to be effective.		* The 0.01% film was not prepared, because this concentration seems too low to be effective.
	*		*

Elizabeth Ghias at 21:36, 8 February 2013

Elizabeth Ghias — Fri, 08 Feb 2013 21:36:51 GMT

←Older revision		Revision as of 21:36, 8 February 2013
Line 43:		Line 43:


-
-	~~<u>NMR of Quaternary Ammonium Salt</u>~~
-
-	#

	==Data==		==Data==

-	~~<u>NMR of Quaternary Ammonium Salt</u>~~	+	No data was collected today.
-		+
-		+

	==Notes==		==Notes==
-	~~This area is for any observations or conclusions that you would like to note.~~
-

-	~~Use categories like tags~~. ~~Change the "Course" category~~ to the ~~one corresponding~~ to ~~your course~~. The ~~"Miscellaneous" tag can~~ be used ~~for particular experiments, as instructed by your professor~~. ~~Please be sure to change or delete~~ this ~~tag as required so that the categories remain well organized~~.	+	* The 10% film solidified before glutaraldehyde could be added, so it was discarded. A 7% film with 50 mL water was made to test the effects of the higher concentration while ensuring that the film does not solidify.
		+	* Two 1% films were prepared to test the effects of preparing in an Erlenmeyer flask vs. a beaker. The film prepared in the flask did not have bubbles, so this is the method that will be used from now on.
		+	* The 0.01% film was not prepared, because this concentration seems too low to be effective.
		+	*

-	~~[[Category:Course]]~~
-	~~[[Category:Miscellaneous]]~~

Klare Lazor: /* Description */

Klare Lazor — Fri, 08 Feb 2013 21:25:02 GMT

Description

←Older revision		Revision as of 21:25, 8 February 2013
Line 46:		Line 46:
	<u>NMR of Quaternary Ammonium Salt</u>		<u>NMR of Quaternary Ammonium Salt</u>

-	#	+	#
-		+
-		+
-		+

	==Data==		==Data==

Elizabeth Ghias at 17:55, 8 February 2013

Elizabeth Ghias — Fri, 08 Feb 2013 17:55:45 GMT

←Older revision		Revision as of 17:55, 8 February 2013
Line 10:		Line 10:

	==Objective==		==Objective==
		+
		+	To prepare new films containing phenol, to purify the quaternary ammonium salt prepared on Monday, and to take an NMR of the purified salt.

	==Description==		==Description==
		+
		+	<u>Phenol Film Calculations</u>
		+
		+
		+
		+
		+
		+
		+
		+	<u>Phenol Film Preparations</u>
		+
		+	# Prepare the 10% film by dissolving 0.214 g phenol and 1 g PVOH in 10 mL water.
		+	# Allow to dissolve on the hot plate, then add 1 mL glutaraldehyde, allow to stir for 2-3 minutes, then pour into an evaporating dish and allow to dissolve over the weekend.
		+	# Prepare a stock solution of 0.214 g phenol in 10 mL water.
		+	# Allow to dissolve.
		+
		+
		+
		+
		+
		+	<u>Quaternary Ammonium Salt Purification</u>
		+
		+	# Turn off the heat on the round bottom flask containing the reaction and remove from the heating mantle.
		+	# Fill a beaker with 100 mL ethyl acetate.
		+	# Place on ice.
		+	# Add the product drop-wise
		+	# Filter and collect precipitate.
		+
		+
		+
		+	<u>NMR of Quaternary Ammonium Salt</u>
		+
		+	#
		+
		+
		+

	==Data==		==Data==
-	* Add data and results here...	+
		+	<u>NMR of Quaternary Ammonium Salt</u>
		+
		+

	==Notes==		==Notes==

Elizabeth Ghias: Autocreate 2013/02/08 Entry for User:Elizabeth_Ghias/Notebook/Experimental_Chemistry

Elizabeth Ghias — Fri, 08 Feb 2013 17:30:06 GMT

Autocreate 2013/02/08 Entry for User:Elizabeth_Ghias/Notebook/Experimental_Chemistry

New page

{|{{table}} width="800"
|-
|style="background-color: #EEE"|[[Image:BDLlogo_notext_lr.png|128px]]<span style="font-size:22px;"> Experimental Chemistry</span>
|style="background-color: #F2F2F2" align="center"|<html><img src="/images/9/94/Report.png" border="0" /></html> [[{{#sub:{{FULLPAGENAME}}|0|-11}}|Main project page]]<br />{{#if:{{#lnpreventry:{{FULLPAGENAME}}}}|<html><img src="/images/c/c3/Resultset_previous.png" border="0" /></html>[[{{#lnpreventry:{{FULLPAGENAME}}}}{{!}}Previous entry]]<html>      </html>}}{{#if:{{#lnnextentry:{{FULLPAGENAME}}}}|[[{{#lnnextentry:{{FULLPAGENAME}}}}{{!}}Next entry]]<html><img src="/images/5/5c/Resultset_next.png" border="0" /></html>}}
|-
| colspan="2"|


==Objective==

==Description==

==Data==
* Add data and results here...

==Notes==
This area is for any observations or conclusions that you would like to note.

Use categories like tags. Change the "Course" category to the one corresponding to your course. The "Miscellaneous" tag can be used for particular experiments, as instructed by your professor. Please be sure to change or delete this tag as required so that the categories remain well organized.

[[Category:Course]]
[[Category:Miscellaneous]]


|}

__NOTOC__