User:Helen L. Slucher/Notebook/CHEM 571/2013/09/25: Difference between revisions

From OpenWetWare
Jump to navigationJump to search
Line 12: Line 12:


==Description==
==Description==
We will be using a Bio-Rad Mini Protean system with pre-cast Mini Protean TGX gels. The manual for this system can be found [http://www.bio-rad.com/webroot/web/pdf/lsr/literature/Bulletin_1658100.pdf here] We will be running SDS-PAGE followed by gel development with Coomassie Blue staining.
Below is a short description of how we will proceed. Please refer to the manual for more detailed instructions
# Prepare the Gel and Assemble the Electrophoresis Cell
# Prepare the Gel and Assemble the Electrophoresis Cell
## Remove comb and tape from the gels
## Remove comb and tape from the gels
Line 22: Line 18:
## Fill the inner and outer buffer chambers with running buffer
## Fill the inner and outer buffer chambers with running buffer
# Prepare and Load Samples
# Prepare and Load Samples
## You prepped your samples yesterday
## Heat your samples for 5 minutes at 100C (in the thermocycler)
## Heat your samples for 5 minutes at 100C (in the thermocycler)
## Load 20uL of protein ladder into column 1 of your gel
## Load 20uL of protein ladder into column 1 of your gel

Revision as of 14:44, 12 October 2013

Project name <html><img src="/images/9/94/Report.png" border="0" /></html> Main project page
<html><img src="/images/c/c3/Resultset_previous.png" border="0" /></html>Previous entry<html>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</html>Next entry<html><img src="/images/5/5c/Resultset_next.png" border="0" /></html>


Objective

Run SDS-PAGE to observe amount of hemoglobin remaining after yesterday's digestion.

Description

  1. Prepare the Gel and Assemble the Electrophoresis Cell
    1. Remove comb and tape from the gels
    2. Rinse the wells with running buffer
    3. Assemble the electrophoresis cell (note diagrams in manual)
    4. Fill the inner and outer buffer chambers with running buffer
  2. Prepare and Load Samples
    1. Heat your samples for 5 minutes at 100C (in the thermocycler)
    2. Load 20uL of protein ladder into column 1 of your gel
    3. Load 20uL of your samples into the appropriate lane of your gel
  3. Perform electrophoresis
    1. Run for 30 minutes at 200V (I need to make sure our power source can do this)
  4. Develop/Stain your gel
    1. Place gel in Fixative Solution (40% methanol, 10% acetic acid, 50% water) for 30 minutes
    2. Place gel in Stain Solution (0.025% (w/v) Coomassie Blue, 10% acetic acid, 90% water) for 1 hour
    3. Place gel in Destain Solution (10% acetic acid, 90% water) for 15 minutes
      1. Repeat this step with fresh destain solution 2 more times



Retrieved from "https://openwetware.org/mediawiki/index.php?title=User:Helen_L._Slucher/Notebook/CHEM_571/2013/09/25&oldid=737515"