User:Jamie Nunziata/Notebook/Biomaterial Design 2016/2016/10/07

From OpenWetWare
Jump to navigationJump to search
Project name <html><img src="/images/9/94/Report.png" border="0" /></html> Main project page
<html><img src="/images/c/c3/Resultset_previous.png" border="0" /></html>Previous entry<html>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</html>Next entry<html><img src="/images/5/5c/Resultset_next.png" border="0" /></html>

Objectives

Today's objectives include the following:

  1. Continue gathering test results from the 30% solution bentonite beads
  2. Run UV Vis of the 30% sln bentonite beads
  3. Run DSC on samples
  4. Synthesize 40% bentonite beads

Procedure

"Testing the 30% sln bentonite beads
The 30% bentonite beads were tested using the same method as that from before.

Uv Vis of the 30% dry bentonite beads
These beads were analyzed via UV Vis using the same procedure as the 10% bentonite beads, from the 28th.

DSC
DSC was also run today of the 4 films: 0.5mL of glutaraldehyde + PVA, 1.0mL of glutaraldehyde + PVA, 0.5mL of glutaraldehyde + PVA + clay solution, and 0.5mL of glutaraldehyde + PVA + clay solid.

Synthesis of 40% Bentonite beads
The synthesis of 40% bentonite beads was prepared using the same procedure from the 21st using the following reagents: 33.33mL of 3% by weight bentonite solution, 13.39mL of conc. HCL, 3.28mLs of DI water.



Retrieved from "https://openwetware.org/mediawiki/index.php?title=User:Jamie_Nunziata/Notebook/Biomaterial_Design_2016/2016/10/07&oldid=960700"