User:Karlena L. Brown/Notebook/PVOH Research/2012/09/28

From OpenWetWare
Jump to navigationJump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.
PVOH Research <html><img src="/images/9/94/Report.png" border="0" /></html> Main project page
<html><img src="/images/c/c3/Resultset_previous.png" border="0" /></html>Previous entry<html>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</html>Next entry<html><img src="/images/5/5c/Resultset_next.png" border="0" /></html>

OBJECTIVES

  1. Run X-ray Diffraction of 50% CEC NaMT, 100% CEC NaMT, and 2:1 Clay-α-Fe3O4
  2. Calculate the amount of Na+ ions in the 2000ppm SO42- solution
  3. Calculate the amount of Cu2+ ions in the 2000ppm SO42- solution
  4. Calculate the amount of Na+ ions in the 20ppm SO42- solution
  5. Calculate the amount of Cu2+ ions in the 20ppm SO42- solution
  6. Prepare PVOH 22K films for Glutaldehyde Crosslinking

X-Ray Diffraction Instructions

Sample Preparation

  • Clean off the low signal background sample holder with a Kimwipe and acetone
  • Using a spatula, scoop and place small amount of finely ground clay sample into sample holder compartment
  • Using a spatula, level off the clay surface in the compartment making an even smooth level plane
  • Wipe the outsides of the compartment of the low signal background sample holder with Kimwipe and acetone again


Instrument Programming and Operation

  • Turn on chiller machine
  • Power up X-Ray Diffractometer
  • Set geiger counter 0.1 as a value
  • Check radiation output
  • Open X-Ray Diffractometer instrument door and set sample in sample counter
  • Record sample compartment number in the machine and close the X-ray door
  • Turn on computer, find instrument password, and open STANDARD MEASUREMENT PROGRAM
  • Use the command window to click machine on to connect to the computer
  • Change the file name under Data window to create new folder → CHEM 581 → MKM
  • Create name for sample run under new folder MKM → NaMT
  • Finally save all information and let the sample run begin and continue for 30 minutes


X-Ray Diffraction will be run on the following clays: 50% CEC NaMT, 100% CEC NaMT, and the 2:1 α-Fe3O4


NOTES

  1. Particle sizes of clay must always be small and finely ground
  2. Peaks in clay appear at very low deflection angles (2.5°)
  3. NEVER turn off the X-ray coolant in the chiller machine: DAMAGES X-RAY TOOL!!!
  4. NEVER rotate powders because sample can fall out!!!
  5. All sample run should be run from angles (2 - 40°) at a scanning speed no greater than 1.0

Na+ and Cu2+ Ion Calculations in 2000ppm SO42- Solutions

  • Calculations
  MW Na2SO4: 142.04 g/mol
  MW Na+: 22.99 g/mol
  Mass Na+: 0.00150 g Na2SO4 × (1 mol Na2SO4/142.04 g Na2SO4) × (2 mol Na+/1 mol Na2SO4) × (22.99 g Na+/1 mol Na+) = 4.856 × 10-4 g Na+
  Actual concentration of Na+ in 2020 ppm SO4-2 solution:
  (4.856 × 10-4 g Na+)/0.5 L × 106 = 971 ppm



  MW CuSO4·5H2O: 249.69 g/mol
  MW Cu+2: 63.55 g/mol 
  0.00252 g CuSO4·5H2O × (1 mol CuSO4·5H2O/249.68 g CuSO4·5H2O) × (1 mol Cu+2/1 mol CuSO4·5H2O) × (63.55 g Cu+2/1 mol CuSO4·5H2O) = 6.41 × 10-4 g Cu+2
  Actual concentration of Cu+2 in 2020 ppm SO4-2 solution:
  (6.41 × 10-4 g Cu+2)/0.5 L × 106 = 1283 ppm Cu+2

Na+ and Cu2+ Ion Calculations in 20ppm SO42- Solutions

Actual concentration of Na+ in 20 ppm SO4-2 solution: 

  Actual concentration of Na+ in 2020 ppm SO4-2 solution:
  (4.856 × 10-4 g Na+)/0.5 L × 106 = 971 ppm
  (971 ppm)(0.00495 L) = (M2)(0.5 L)
  M2 = 9.61 ppm Na+

Actual concentration of Cu+2 in 20 ppm SO4-2 solution: 

  Actual concentration of Cu+2 in 2020 ppm SO4-2 solution:
  (6.41 × 10-4 g Cu+2)/0.5 L × 106 = 1283 ppm Cu+2
  (1283 ppm)(5.16 mL) = (M2)(0.5 L)
  M2 = 13.2 ppm Cu+2

Glutaldehyde Films Preparations

PROCEDURAL STEPS FOR GLUTALDEHYDE FILM PREPARATION CAN BE FOUND UNDER 9/25/12


Prepared PVOH 22K Films For Crosslinking

' PVOH 22K w/ GA PVOH 22K w/ GA & PDMS PVOH 22K w/ GA & NaMT PVOH 22K w/ GA & 100% CEC NaMT PVOH 22K w/ GA & 50% CEC NaMT
Original Mass PVOH used (g) 0.5141 0.9499 0.4880 0.7665 0.4691
Amount of [GA] added (mL) 0.5 0.5 1 1 1
Amount of PDMS added (mL) 0 0.052 0 0 0
Amount of Clay added (g) 0 0 0.1040 0.1022 0.1007


Retrieved from "https://openwetware.org/mediawiki/index.php?title=User:Karlena_L._Brown/Notebook/PVOH_Research/2012/09/28&oldid=663376"