User:Karlena L. Brown/Notebook/PVOH Research/2012/10/26: Difference between revisions
From OpenWetWare
(→Notes) |
|||
(7 intermediate revisions by the same user not shown) | |||
Line 7: | Line 7: | ||
<!-- ##### DO NOT edit above this line unless you know what you are doing. ##### --> | <!-- ##### DO NOT edit above this line unless you know what you are doing. ##### --> | ||
==OBJECTIVES== | ==OBJECTIVES== | ||
* Make porphyrin solutions with varied SO<sub>4</sub><sup>2-</sup> salts | |||
* Take UV-Vis of varied porphyrin solutions with diluted varied SO<sub>4</sub><sup>2-</sup> salts | |||
==Porphyrin Salt Selection and Preparations 2== | ==Porphyrin Salt Selection and Preparations 2== | ||
SO<sub>4</sub><sup>2-</sup> salts used:'''Fe<sub>2</sub>(SO<sub>4</sub>)<sub>3</sub>, Al<sub>3</sub>(SO<sub>4</sub>)<sub>3</sub>, FeSO<sub>4</sub>, & Na<sub>2</sub>SO<sub>4</sub>''' | SO<sub>4</sub><sup>2-</sup> salts used:'''Fe<sub>2</sub>(SO<sub>4</sub>)<sub>3</sub>, Al<sub>3</sub>(SO<sub>4</sub>)<sub>3</sub>, FeSO<sub>4</sub>, & Na<sub>2</sub>SO<sub>4</sub>''' | ||
Line 55: | Line 58: | ||
|} | |} | ||
==UV-Vis Spectrum of Porphyrin with Salts 2== | |||
[[Image:9.445_uM_Porphine.JPG]] | |||
<br> | |||
[[Image:31.48_uM_Porphine.JPG]] | |||
<br> | |||
==Notes== | ==Notes== | ||
* The Al<sub>3</sub>(SO<sub>4</sub>)<sub>3</sub> 10mM solution was very opaque and cloudy with some precipitate slightly falling out of solution. Before using the Al<sub>3</sub>(SO<sub>4</sub>)<sub>3</sub> solution, it had to be swirled to ensure that all precipitate was in solution. | |||
* Also for the FeSO<sub>4</sub> 10mM salt solution, it was prepared in a 50mL volumetric flask instead of a 100mL volumetric flask. | |||
* Also for the 10mM salt solutions of Fe<sub>2</sub>(SO<sub>4</sub>)<sub>3</sub> and Na<sub>2</sub>SO<sub>4</sub>, these solutions were actually prepared through the process of dilution in conical test tubes. 1mL of the 100mM salt solution for each substance was taken and diluted with 9mL of HPLC grade H<sub>2</sub>O to produce the 10mM salt solution of each substance. | |||
<!-- ##### DO NOT edit below this line unless you know what you are doing. ##### --> | <!-- ##### DO NOT edit below this line unless you know what you are doing. ##### --> | ||
|} | |} | ||
__NOTOC__ | __NOTOC__ |
Revision as of 11:53, 30 November 2012
PVOH Research | <html><img src="/images/9/94/Report.png" border="0" /></html> Main project page <html><img src="/images/c/c3/Resultset_previous.png" border="0" /></html>Previous entry<html> </html>Next entry<html><img src="/images/5/5c/Resultset_next.png" border="0" /></html> | |||||||||||||||||||||||||
OBJECTIVES
Porphyrin Salt Selection and Preparations 2SO42- salts used:Fe2(SO4)3, Al3(SO4)3, FeSO4, & Na2SO4 Preparing 10mM Stock Solutions For Each Salt :
(Ensure that the volumetric calibration line is not surpassed or solution must be remade.) 10mM Salt Solution Calculations
MW Fe2(SO4)3: 278.91 g/mol 10mM Fe2(SO4)3 × (100mL H2O / 1000mL H2O) × (278.91g Fe2(SO4)3 / 1 mol Fe2(SO4)3) = 0.2789g Fe2(SO4)3
MW Al3(SO4)3: 356.37 g/mol 10mM Al3(SO4)3 × (100mL H2O / 1000mL H2O) × (656.37g Al3(SO4)3 / 1 mol Al3(SO4)3) = 0.6564g Al3(SO4)3
MW FeSO4: 278.01 g/mol 10mM FeSO4 × (50mL H2O / 1000mL H2O) × (278.01g FeSO4 / 1 mol FeSO4) = 0.1390g FeSO4
MW Na2SO4: 142.04 g/mol 10mM Na2SO4 × (100mL H2O / 1000mL H2O) × (142.04g Na2SO4 / 1 mol Na2SO4) = 0.1420g Na2SO4
UV-Vis Spectrum of Porphyrin with Salts 2Notes
|