User:Karlena L. Brown/Notebook/PVOH Research/2013/03/06

From OpenWetWare

(Difference between revisions)
Jump to: navigation, search
(Autocreate 2013/03/06 Entry for User:Karlena_L._Brown/Notebook/PVOH_Research)
(PVOH Film Preparations)
Line 6: Line 6:
| colspan="2"|
| colspan="2"|
<!-- ##### DO NOT edit above this line unless you know what you are doing. ##### -->
<!-- ##### DO NOT edit above this line unless you know what you are doing. ##### -->
-
==PVOH Film Preparations==
+
==OBJECTIVES==
-
'''Prepared PVOH films in water:'''
+
***NO CLASS BECAUSE SNOW STORM OCCURRED 3/6/13
-
* In 10mL beaker, weigh out ~ 0.5 grams PVOH (MW 130,000)
+
-
'''(Actual Mass = 0.4934g)'''
+
-
* Then, using a graduated cylinder add ~ 3 mL H<sub>2</sub>O to the beaker
+
-
* In another 10mL beaker, weigh out ~ 1.0 gram PVOH (MW 130,000)
+
-
'''(Actual Mass = 0.9965g)'''
+
-
* Then, using a graduated cylinder add ~ 5 mL H<sub>2</sub>O to the beaker
+
-
 
+
-
'''Standard PVOH Film Protocol:'''
+
-
* After adding and combining PVOH (MW 130,000) in small beakers with H<sub>2</sub>O, add stir bars and prepare to stir solution.
+
-
* On hot plate, stir and heat both beaker solutions at 70-80°C for ~ 12 min or until PVOH dissolves.
+
-
* Once PVOH solids thoroughly dissolve in solution, pour each solution in a Teflon dish to sit, cool, and dry in a fume hood for ~ 1 day.
+
-
 
+
-
'''Notes:'''
+
-
* An additional 2-3 mL H<sub>2</sub>O was added to each solution to aid the dissolving of the PVOH
+
-
* Heat was reduced when solutions began to boil too rapidly
+
-
* While transferring solutions to Teflon dishes, loss of sample within the small beakers (sample loss = incomplete sample transfer)
+

Revision as of 15:15, 24 March 2013

PVOH Research Main project page
Previous entry      Next entry

OBJECTIVES

      • NO CLASS BECAUSE SNOW STORM OCCURRED 3/6/13



Personal tools