User:Keyun Wang/Notebook/Experimental Biological Chemistry I/2012/11/04: Difference between revisions

From OpenWetWare
Jump to navigationJump to search
No edit summary
Line 29: Line 29:
   Settings: Photometric
   Settings: Photometric
   Data display: Absorbance
   Data display: Absorbance
* Centrifuge was turned out to pre-cool to 4°C.
*The absorbance of cells in four Fernbach flasks were as follows:
*The absorbance of cells in four Fernbach flasks were as follows:
{| {{table}}
| align="center" style="background:#f0f0f0;"|'''Flask'''
| align="center" style="background:#f0f0f0;"|'''Absorbance'''
|-
| 1||0.683
|-
| 2||0.691
|-
| 3||0.657
|-
| 4||0.701
|-
|}
* Cell culture were taken out of orbital shaker and transferred into centrifuge bottles. Mass of centrifuge bottles were balanced out to make sure successful centrifugation. The cell culture were placed into centrifuge pre-cooled to 4°C and spin for 30 minutes, 4500rpm, at 4°C.
* Supernatants from centrifuged products were discarded. All four pellets from four centrifuge bottles were resuspended in 30mL binding buffer with the following condition:
  20mM Tris buffer
  0.5M NaCl
  30mM Imidizole
  pH 7.5
* Pellet with binding buffer resuspension were stored in a 50mL falcon tube, and stored in freezer at -80°C.


 
==Notes==
 
* IPTG was added to induce cell expression. IPTG was added immediately before cells were placed in orbital shaker to make sure that cells were under ideal conditions when expression proteins.
* The absorbance for cells after 4 hours of growth were higher than expected (an absorbance of 0.600 at 600nm). This indicates the cells were overgrown. The cells were harvested nonetheless. The high absorbance indicates more cells in flasks, thus more protein when purified.
* The cell cultures were centrifuged for 30 minutes as oppose to the protocol which suggests 15 minutes. Longer centrifugation time is used here to make sure all cells were in the pellet.
<!-- ##### DO NOT edit below this line unless you know what you are doing. ##### -->
<!-- ##### DO NOT edit below this line unless you know what you are doing. ##### -->
|}
|}


__NOTOC__
__NOTOC__

Revision as of 17:13, 4 November 2012

Experimental Biological Chemistry I <html><img src="/images/9/94/Report.png" border="0" /></html> Main project page
<html><img src="/images/c/c3/Resultset_previous.png" border="0" /></html>Previous entry<html>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</html>Next entry<html><img src="/images/5/5c/Resultset_next.png" border="0" /></html>

Purpose

  • Grow and amplify ADA transfected BL21(DE3) E.coli cells in LB media\
  • Extract cells from media after ADA protein expression

Procedure

  • Centrifuge was turned on and pre-cooled to 4°C
  • 0.4M of Isopropyl β-D-1-thiogalactopyranoside (IPTG) in sterile water was calculated via the following way:
  Molecular weight: 238.31g/mol
  0.4M × 0.004L = 0.0016mol of IPTG needed
  238.31g/mol × 0.0016mol = 0.3813g of IPTG needed
  • 0.4M of IPTG was made in the following way:
    • 0.3813g of IPTG was weighted out
    • 4mL of autoclaved water was mixed with IPTG in a 15mL falcon tube
    • 1mL of 0.4M IPTG aliquot was made into 4 of 1.5mL microcentrifuge tubes for cell expression
  • Cells grew over night from 11/03/2012 in shaker were taken out. Four separate 35mL culture were poured into four separate 50mL falcon tube under sterile environment. Mass of the four cultures were balanced for successful centrifugation process. The four cultures were placed in centrifuge under 4°C, 4500rpm, for 15 minutes.
  • Orbital shaker was left on prewarmed to 37°C.
  • After centrifugation, pellets and supernatants form. The supernatants were discarded. The four pellets were resuspended with resuspending 4mL of autoclaved LB media in first pellet, then in the second pellet, third pellet, then fourth pellet. After 4 pellets from 4 different 50mL falcon tubes were resuspended, 1mL of resuspension were placed into each 1L autoclaved LB media from 11/03/2012.
  • Four aliquots of IPTG were added into each Fernbach flasks with cell culture before loaded into orbital shaker.
  • Cultures were left in orbital shaker for 4 hours, 210rpm, under 37°C.
  • After 4 hours of shaking, 1mL of cell were placed into a cuvette and run under UV-vis to test cell growth. The UV-1800 UV-vis spectrometer from Shimadzu was used to measure absorbance via the following settings:
  Wavelength: 600nm
  Settings: Photometric
  Data display: Absorbance
  • Centrifuge was turned out to pre-cool to 4°C.
  • The absorbance of cells in four Fernbach flasks were as follows:
Flask Absorbance
1 0.683
2 0.691
3 0.657
4 0.701
  • Cell culture were taken out of orbital shaker and transferred into centrifuge bottles. Mass of centrifuge bottles were balanced out to make sure successful centrifugation. The cell culture were placed into centrifuge pre-cooled to 4°C and spin for 30 minutes, 4500rpm, at 4°C.
  • Supernatants from centrifuged products were discarded. All four pellets from four centrifuge bottles were resuspended in 30mL binding buffer with the following condition:
  20mM Tris buffer
  0.5M NaCl
  30mM Imidizole
  pH 7.5
  • Pellet with binding buffer resuspension were stored in a 50mL falcon tube, and stored in freezer at -80°C.

Notes

  • IPTG was added to induce cell expression. IPTG was added immediately before cells were placed in orbital shaker to make sure that cells were under ideal conditions when expression proteins.
  • The absorbance for cells after 4 hours of growth were higher than expected (an absorbance of 0.600 at 600nm). This indicates the cells were overgrown. The cells were harvested nonetheless. The high absorbance indicates more cells in flasks, thus more protein when purified.
  • The cell cultures were centrifuged for 30 minutes as oppose to the protocol which suggests 15 minutes. Longer centrifugation time is used here to make sure all cells were in the pellet.


Retrieved from "https://openwetware.org/mediawiki/index.php?title=User:Keyun_Wang/Notebook/Experimental_Biological_Chemistry_I/2012/11/04&oldid=651129"