User:Khyra A. Neal/Notebook/Chem 571/2014/09/30: Difference between revisions

From OpenWetWare
Jump to navigationJump to search
No edit summary
No edit summary
Line 32: Line 32:
|}
|}


[[Image:Cacl2.jpg]]
[[Image:CaCl2.jpg]]


*Measure HPLC water, DI water, tap water, and your lysozyme stock solution.
*Measure HPLC water, DI water, tap water, and your lysozyme stock solution.
Line 74: Line 74:
|}
|}


[[Image:nacl.jpg]]
[[Image:NaCl.jpg]]


*Measure HPLC water, DI water, tap water, and your lysozyme stock solution.
*Measure HPLC water, DI water, tap water, and your lysozyme stock solution.

Revision as of 15:10, 30 September 2014

Project name <html><img src="/images/9/94/Report.png" border="0" /></html> Main project page
<html><img src="/images/c/c3/Resultset_previous.png" border="0" /></html>Previous entry<html>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</html>Next entry<html><img src="/images/5/5c/Resultset_next.png" border="0" /></html>

Tasklist

1. Calibration Curve for CaCl2

  • Prepare 25 mL 50 mM CaCl2 using HPLC water
    • 0.13875 g CaCl2 in 25 mL HPLC water
  • Prepare 25 mL of each using serial dilutions: 5 mM, 500 μM, 50 μM, and 5 μM CaCl2 from 50 mM stock CaCl2
    • Dilute all solutions to 25 mL with HPLC water.
  • Measure Cl- using ISE
CaCl2 concentration mV measurement (mV)
5μM -44.6
50μM 8.2
500μM 39.5
5mM 63.5
50mM 86.6

  • Measure HPLC water, DI water, tap water, and your lysozyme stock solution.
Substance mV measurement (mV)
Tap water 51.3
HPLC water -23.0
DI water -51.5
Lysozyme 0.5g/L -19.1

2. Calibration Curve for NaCl

  • Prepare 25 mL of 50 mM NaCl using HPLC water
    • 0.07305 g NaCl in 25 mL HPLC water
  • Prepare 25 mL of each using serial dilutions: 5 mM, 500 μM, 50 μM, and 5 μM NaCl from 50 mM NaCl stock solution
    • Dilute all solutions to 25 mL with HPLC water
  • Measure Cl- using ISE
NaCl concentration mV measurement (mV)
5μM 146.5
50μM 129.6
500μM 81.3
5mM 27.5
50mM -23.9

  • Measure HPLC water, DI water, tap water, and your lysozyme stock solution.
Substance mV measurement (mV)
Tap water 65.5
HPLC water 163.5
DI water 158.8
Lysozyme 0.5g/L 89.4


3. Try measuring 50 mM and 50 mM of other salts to check for interferences

  • Cupric Chloride
    • 0.16806 g Cupric Chloride and 0.073 g NaCl in 25 mL HPLC Water
NaCl concentration Cu(II)Cl2 concentration mV measurement (mV)
50μM 50 μM -7.7


Dialysis

  • Prepare 10 mL 0.5 g/L Lysozyme
    • 0.005 g Lysozyme in 25 mL HPLC water using volumetric flask
  • Prepare 0.25 mM HCl from 2.5 mM HCl stock solution
    • 10x dilution from stock
  • Cut a piece of 3500 MWCO flat dialysis tubing, wet it, and insert it in the 5-well dialysis chamber and clamp the dialysis chamber shut.
  • Fill one side of each well with 1 mL of 0.5 g/L Lysozyme solution
    • Measure out 1 mL with transfer pipette then add 1mL using Pasteur pipette to the wells
  • Fill the other side of the wells with the following solutions:
    • HPLC water, 0.25 mM HCl, 50 mM CaCl2, 500 μM CaCl2, and 50 mM NaCl
  • Insert screws to prevent leaving/evaporation
  • Place on low speed shaker overnight.



Retrieved from "https://openwetware.org/mediawiki/index.php?title=User:Khyra_A._Neal/Notebook/Chem_571/2014/09/30&oldid=825010"