User:Khyra A. Neal/Notebook/Chem 571/2014/10/21: Difference between revisions
Line 39: | Line 39: | ||
* You will continue to connect your Ag wire to the red lead on the multimeter | * You will continue to connect your Ag wire to the red lead on the multimeter | ||
7. I<sup>-</sup> ISE Calibration Curve | |||
[[Image:KI_Calibration_Curve.jpg]] | |||
==Stock Solution Preparation== | ==Stock Solution Preparation== |
Revision as of 11:41, 22 October 2014
Project name | <html><img src="/images/9/94/Report.png" border="0" /></html> Main project page <html><img src="/images/c/c3/Resultset_previous.png" border="0" /></html>Previous entry<html> </html>Next entry<html><img src="/images/5/5c/Resultset_next.png" border="0" /></html> |
October 21, 2014Tasklist1. Preparation of Dialysis for 30:1 Colloid vs CaCl2 2. Prepare ISE for Iodide 3. Determine Molecular weight of Electrophoresis gel from October 15, 2014 By comparison with Precision Plus Protein Standards, the molecular weight of all samples was close to 15 KD, slightly lower, as expected for lysozyme compounds with MW=14,300 KD. There was a very small quantity of unknown A and colloid in the gel. The very faint mark observed in well 3 could even be considered to be bleed-over from the 30:1 colloid in well 4. Therefore, electrophoresis was inconclusive with respect to the molecular weight of unknown A. 4. Prepare 10 mL 3 M NaCl
5. Prepare 50 mL 4 M KNO3
Place electrode in small vial with enough KNO3 solution to cover the vycor tip
6. Test your electrodes with a range of KI solutions NEED TO DO
7. I- ISE Calibration Curve Stock Solution Preparation1. The previous KI solutions were discarded because there was an error with the dilutions that were prepared. All new KI concentrations were prepared
2. 10 mM NH4SCN
3. 75 mM AgNO3
|