User:Linh N Le/Notebook/2009/06/25: Difference between revisions

From OpenWetWare
< User:Linh N Le‎ | Notebook‎ | 2009‎ | 06
Jump to navigationJump to search
Line 23: Line 23:
*CCD Cam successfully installed on daq2
*CCD Cam successfully installed on daq2


==Laser Images==
*Currently, the laser has been running for ~20mins, which should be sufficient warm up time
*I will trying to look at the laser with its power ~38mW
**Note: Koch set it to 50mw, then before i left to get some optics it was 43mw, now its only saying 38mw
*Will also place a ND3 filter in front of the CCD
<!-- ##### DO NOT edit below this line unless you know what you are doing. ##### -->
<!-- ##### DO NOT edit below this line unless you know what you are doing. ##### -->
|}
|}

Revision as of 14:23, 25 June 2009

Project name <html><img src="/images/9/94/Report.png" border="0" /></html> Main project page
<html><img src="/images/c/c3/Resultset_previous.png" border="0" /></html>Previous entry<html>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</html>Next entry<html><img src="/images/5/5c/Resultset_next.png" border="0" /></html>

To Do

  • Profile Evan's laser
  • Move stuff into the other lab
  • Get access to the other lab (key)
  • Play with the chemicals list some more (Need to talk to Andy about this)

Laser + new lab

  • Koch doesnt want me to take kochlab-daq2 to the new lab, so i will try to dig up an older computer to do so
  • We did set it up and took a look yesterday
    • The laser is 1.6W, Koch advises me to be extra careful with this laser
    • Also need Andy to tell me where the IR imaging cards are
  • Will try to use the CCD camera and labview to analyze the beam
    • We will try it at it's threshold power to for safety
    • Will then try with ND filters
      • Eventually we want to try it out at full power, but I'm afraid of melting ND filters
  • CCD Cam successfully installed on daq2

Laser Images

  • Currently, the laser has been running for ~20mins, which should be sufficient warm up time
  • I will trying to look at the laser with its power ~38mW
    • Note: Koch set it to 50mw, then before i left to get some optics it was 43mw, now its only saying 38mw
  • Will also place a ND3 filter in front of the CCD
Retrieved from "https://openwetware.org/mediawiki/index.php?title=User:Linh_N_Le/Notebook/2009/06/25&oldid=319085"