To Do
- Profile Evan's laser
- Move stuff into the other lab
- Get access to the other lab (key)
- Play with the chemicals list some more (Need to talk to Andy about this)
Laser + new lab
- Koch doesnt want me to take kochlab-daq2 to the new lab, so i will try to dig up an older computer to do so
- We did set it up and took a look yesterday
- The laser is 1.6W, Koch advises me to be extra careful with this laser
- Also need Andy to tell me where the IR imaging cards are
- Will try to use the CCD camera and labview to analyze the beam
- We will try it at it's threshold power to for safety
- Will then try with ND filters
- Eventually we want to try it out at full power, but I'm afraid of melting ND filters
- CCD Cam successfully installed on daq2
Laser Images
- Currently, the laser has been running for ~20mins, which should be sufficient warm up time
- I will trying to look at the laser with its power ~38mW
- Note: Koch set it to 50mw, then before i left to get some optics it was 43mw, now its only saying 38mw
- Will also place a ND3 filter in front of the CCD
- Took a pic at 13in away, nd 3 filter, 8.65A, 11% .02W
Analysis
- It has been almost a year since the last time I tried doing this, so I kinda forgot how I did it
- Here are the notes from when I did it last year. They are on the private wiki so those w/o access can email me if they really want to read them
- For the second photo, the max value is only 248, meaning that the photo is not saturated (255 is saturated according to me last year)
- Following my old methods, multiply 248 by 1/e^2 = 33.5
- pixles 220 and 476, distance of 256.
- 256 times 5.6e-6 1.4e-3 meters
|