User:Linh N Le/Notebook/2009/08/10: Difference between revisions
From OpenWetWare
Line 30: | Line 30: | ||
*Started the incubator's heater at 3:30pm, set it to 37C | *Started the incubator's heater at 3:30pm, set it to 37C | ||
**The current reading by the probe is 20C and the display says 24C | **The current reading by the probe is 20C and the display says 24C | ||
*The instructions state that the temperature setting is for degrees above ambient | |||
**Something to look into once it heats up | |||
<!-- ##### DO NOT edit below this line unless you know what you are doing. ##### --> | <!-- ##### DO NOT edit below this line unless you know what you are doing. ##### --> |
Revision as of 14:50, 10 August 2009
Project name | <html><img src="/images/9/94/Report.png" border="0" /></html> Main project page <html><img src="/images/c/c3/Resultset_previous.png" border="0" /></html>Previous entry<html> </html>Next entry<html><img src="/images/5/5c/Resultset_next.png" border="0" /></html> |
To Do
Innova 4300
Temp Tests
|